ADLER AD 7057 Power 300 W Water Tank Instructions Guide

ADLER AD 7057 Power 300 W Water Tank

SAFETY CONDITIONS

PLEASE READ CAREFULLY AND RETAIN FOR USE IN THE FUTURE

1. Before using the device, read the instruction manual and follow the instructions contained therein. The manufacturer is not responsible for any damage caused by the use of the device contrary to its intended use or improper operation.
2. The device is for domestic use only. Do not use for other purposes incompatible with its intended use.
3. Connect the device only to a grounded outlet 220-240 V ~ 50 Hz. In order to increase the safety of use, do not connect multiple electrical appliances to a single circuit at the same time.
4. Be especially careful when using the device when children are around. Do not allow children to play with the appliance Do not allow children or persons unfamiliar with the appliance to use it.
5. WARNING: This equipment may be used by children over 8 years of age and persons with limited physical, sensory or mental ability, or persons without experience or familiarity with the equipment, if it is done under the supervision of a person responsible for their safety or they have been given instructions on the safe use of the equipment and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and maintenance of the equipment should not be performed by children unless they are over 8 years of age, and these activities are performed under supervision.
6. Always remove the plug from the power outlet after use by holding the outlet with your hand. DO NOT pull on the power cord.
7. Do not immerse the cord, plug, or the entire device in water or other liquid. Do not expose the unit to weather conditions (rain, sun, etc.) or use it in high humidity conditions (bathrooms, damp camping houses).
8. Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialized repair facility to avoid danger.
9. Do not use the device with a damaged power cord or if it has been dropped or damaged in any other way, or malfunctions. Do not repair the device yourself, as there is a risk of electrocution. Return a damaged device to a competent service center for inspection or repair. Any repairs may be made only by authorized service centers. Improper repair may cause danger to the user.
10. Place the appliance on a cool, stable, level surface, away from hot kitchen appliances such as electric stove, gas burner, etc..
11. Do not use the device near flammable materials.
12. The power cord must not hang over the edge of the table or touch hot surfaces.
13. Do not leave the device or the power supply to the outlet unattended.
14. To provide additional protection, it is advisable to install in the electrical circuit, a residual current device (RCD) with a rated residual current of not more than 30 mA. In this regard, please consult an electrical specialist.
15. Do not allow the motor part of the device to get wet.
16. Always turn off the power outlet after use. Do not pull on the power cord.
17. Never use the steam mop with wet hands or without shoes
18. Do not put any objects into the holes of the mop. If any of the holes become clogged, do not use the mop.
19. Do not use the mop without a cloth applied. Do not use when the water tank is empty.
20. Use the steam mop on stairs with extreme caution.
21. Store the device inside in an upright position in a cool and dry place.
22. During use, illuminate the cleaned surface well.
23. Never pour any cleaning agents into the water tank. This may cause damage to the device.
24. Never block the steam vents. Never use on soft surfaces, as this may block the steam vents. Always clean the steam vents of all meshes, hair, etc.
25. Use only the included accessories recommended by the manufacturer.
26. Never direct the steam towards people or animals.
27. Do not use the steam mop on unprotected wood surfaces. When used on waxed surfaces, the wax may be removed by the action of the hot work. Never leave the mop on any wooden surface for an extended period of time.
28. Use the mop very carefully on vinyl floors, linoleum, and all heat-sensitive surfaces. Always test the mop’s performance on a small area of the floor in an inconspicuous place. Before use, read the floor manufacturer’s cleaning instructions to ensure that the surface can be steam cleaned.
29. The steam mop can be used to disinfect ADLER AD 7057 Power 300 W Water Tank the floor in the bathroom, kitchen, shower, etc. To disinfect the surface, keep the mop turned on on the surface to be cleaned for no less than 8 seconds and no more than 15 seconds.
30. Do not add any substances to the water used in the device:
    Descalers, aromatic oils, and cleaning agents.

WARNING: Danger of burns

Device description

1. Power cord
2. Handle release
3. Power knob
4. Power indicator light
5. Mop head
6. Cable hook
7. Handle tube
8. Top handle release button
9. Water tank and plug
10. Microfiber mop pad
11. Pitcher with measuring cup  mop:
12. Carpet pad
13. Mop head release

Before using the steam mop

•   Remove all packaging and disassemble the separate components.
• After unpacking, inspect the steam mop for visual damage such as:
• Misaligned or damaged parts
• Damage to the main body and individual components

Damage to the plug or cable

Note: Before assembling/disassembling any part of the product, make sure that the device is unplugged and has cooled down sufficiently.

• Mounting the bracket (Figure B, page 3)
• The bracket consists of 2 parts:
• 1x handle
• 1x tube

1. Attach the handle to the tube, applying slight pressure until you hear a click.
2. Once attached, place the set on top of the main unit so that the tube hook is parallel to the back of the unit. Press the latch on the base to allow the handle to be fully inserted and secure. It should “snap” into place.
3. If you want to remove the handle, simply press the release button (2) on the front of the unit and pull upward.

Attaching the mop head

1. Attach the mop head (5) to the main body by aligning and lowering the unit onto the mop head connector until it snaps into place.
2. You can remove the floor head by pressing the release button (11) above and lifting the unit.

Microfiber mop pad

• The steam mop should never be used without the microfiber pad (12) in place.
• To attach the pad, place it on the floor with the Velcro facing up. Lift the mop over the pad and align the mop head with the mop pad. Lower the head and rest the mop on it to attach the Velcro to the head.
• To remove the cap, place your foot against the protruding piece of material and lift the mop.

Carpet overlay (Figure D, page 3)

The mop can be used with the carpet cleaning pad (6) to freshen carpets and rugs.

To use the carpet pad, lift the mop over the pad and lower the mop head so that it rests in the center.

Note: The mop head cannot be attached to tADLER AD 7057 Power 300 W Water Tank he carpet overlay. To remove the cap, simply lift the mop.

CLEANING AND CARE

Disconnect the power plug from the wall outlet before cleaning the unit. Use a damp, soft cloth and mild detergent to clean the exterior of the unit.

NEVER IMMERSE THE STEAM MOP IN WATER

When wiping the body, do not allow the area around the switch (3) to become damp. Wash non-electric accessories in warm, soapy water and allow to dry thoroughly before next use.

• Care of microfiber cleaning pads
• Wash the pads in warm water, no higher than 40 degrees.
• Wash separately from other clothes. Do not use fabric softener and do not tumble dry.
• If there are loose threads on the microfiber pad, carefully cut them off with scissors.
• Do not try to pull any threads or cut any threads at the base.
• To purchase new pads, contact your dealer and ask for the pads:

AD 7057.1

PROBLEMS & SOLUTIONS

If any part is damaged, leaking, or cracked, contact the service center. Technical details:

• Power: 1300W
• Voltage: 220-240 V ~ 50/60 Hz

For the sake of the environment

Dispose of cardboard packaging and polyethylene (PE) bags in the appropriate containers for separate collection of municipal waste according to their description. If there are batteries in the device, remove them and separately return them to the collection and storage facility. Return the used device to a suitable collection and storage facility, as the hazardous substances in it may pose a threat to health and the environment. The marking on the product indicates that the device should not be disposed of in the container with municipal waste. Waste electrical equipment is waste that contains substances harmful to humans, animals, and the environment.

These substances can lead to contamination of the soil, water, or air, and through this, they can get into the human body and lead to numerous health ailments, such as vision, hearing, and speech disorders. They can also lead to kidney, liver, and heart damage, ADLER AD 7057 Power 300 W Water Tank and cause skin diseases. Harmful substances can also have adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on the contaminated soils and products made from them may risk the above-mentioned health effects. Do not dispose of the device in the municipal waste container!!! Service: If you wish to purchase spare parts or report any complaints, please contact directly with the seldirectly ler who issthe receipttlyt.

FAQs

What is the power rating of the ADLER AD 7057 Water Tank?

With its 300W operation, the AD 7057 efficiently heats water while using less energy.

What is the water capacity of the tank?

With its two-litre size, the water tank is ideal for small-scale home or office use.

What type of water is suitable for this tank?

Use only filtered or clean tap water. Steer clear of mineral-heavy, syrupy, or salty water to avoid damage and scale accumulation.

Does the water tank have an automatic shut-off?

Indeed, when the water reaches the appropriate temperature or the tank is empty, the AD 7057 will automatically shut off.

How long does it take to heat water?

It usually takes 8 to 12 minutes to heat 2 litres of water, depending on the amount and initial temperature.

Does the tank have a keep-warm function?

No, there is no keep-warm feature on the AD 7057. For optimal effects, use water right away after heating.

Is the tank safe for children?

Indeed, the exterior is made to stay cold to the touch, but because of the hot water inside, care should be used.

How do I know when the water is heated?

When the water reaches the desired temperature, either the indication light will go out or the heating element will turn off on its own.