Amazfit Verge White & Black Smart Watch
Package Contents
- Amazfit Verge Smartwatch
- Charging Cradle
- User Manual
Safety Notice
- The watch has the IP68 water and dust resistance rating, which can withstand soaking for 30 minutes in freshwater at about 1.5 meters deep with normal temperature, but does not support the usage inside showers, saunas, or swimming pools.
- Please do not operate the watch underwater. After submerging, dry it with a soft cloth before operating or charging.
- The watch is not waterproof against corrosive liquids such as acidic or alkaline solutions, chemical reagents, etc. The damage or defect caused by misuse or improper use is not within the scope of warranty.
Know the watch
Install the App
Scan the QR code below with your mobile phone, or search for the “Amazfit Watch” App in major application markets and have it installed.
Turn Your Watch On/Off
- To turn on your watch, press and hold the button on its top right side. Your watch screen will light up and show a startup animation. The animation may play for several minutes upon initial startup.
- To turn off your watch, press and hold the same button on for more than six seconds to display the turn-off interface.
- A QR code will be displayed on your watch screen when it first turns on. This code will be used to pair your watch with your mobile device.
- When the screen of the watch is in its resting state after being switched on, press the same key as the above to light up the screen briefly.
Binding your watch
Open the “Amazfit Watch” App on your mobile phone, log in, and scan the QR code displayed on the watch for binding as prompted.
Charging your watch
Attach your watch to the charging cradle as shown below. Make sure to align the four charging pins on the backside of the watch with the ones on the charging cradle. Connect the charging cradle to a USB plug or a computer by using the provided USB cable. The “Charging” notification will display on the watch screen once it is successfully clipped in. Please use an adapter that is rated 5V and above 1.0A to charge.
Built-In Battery
Precautions: Do not attempt to replace the device’s battery on your own or use force to open the built-in battery. Please only use the official charging base to charge your device
Regulatory Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (EIRP) is not more than that necessary for successful communication.
Disposal and Recycling Information
The use of the WEEE Symbol indicates that the following product may not be treated as household waste. By ensuring that this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of the following product, please contact your local authority, your household waste disposal service provider, or the shop where you have purchased the product.
Certifications and Safety Approvals
Hereby, Anhui Huami Information Technology Co., Ltd., declares that the radio equipment type A1811 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://en.amazfit.com/support.html.
For more regulatory information and product certification/compliance logos related to Amazfit Verge, please go to Settings ->About->Regulatory on your watch.
Specifications
- Name: Amazfit Verge
- Model: A1811
- Battery Capacity: 390 mAh
- Wireless Connectivity: Bluetooth 4.2 BLE / Wi-Fi
- Input Voltage: 5 V DC 700 mA (Max.)
- Frequency: 2402 – 2480MHz
- Max. Output: 9 dBm
- Operating Temperatures: 0°C ~ 40°C / 32°F ~ 104°F
- Water & Dust Resistance Rating: IP68
- Compatible With: Android 4.4, iOS 9.0 or above
Customer Support
All Amazfit products are covered by a 1-year limited warranty.
- Official website: en.amazfit.com
- U.S website: us.amazfit.com
- Email us at: support@amazfit.com
FAQs
Q: Can I monitor heart rate continuously?
Indeed. When your heart rate above predetermined criteria, the Amazfit Verge will notify you.
Q: Does the Verge have GPS?
Indeed. Accurate tracking for outdoor activities like cycling, hiking, and jogging is made possible with built-in GPS + GLONASS, which eliminates the need for a phone.
Q: Can I swim with the Amazfit Verge?
Indeed. The watch can withstand water up to 50 meters, making it excellent for showering and swimming. Don’t press buttons while submerged.
Q: Does the Verge support voice calls?
No. Answering calls directly on the watch is not possible, but you can reject calls and view incoming call notifications.
Q: Can I store and play music directly on the watch?
Indeed. Offline music storage is supported by The Verge. Use Bluetooth headphones that are directly attached to the watch to play music that has been transferred using the Zepp app.
Q: Who do I contact for support or warranty?
Use the Zepp app or the official website to get in touch with Amazfit customer service for replacements, repairs, or technical support.