Seeed Studio J2021 ReComputer Edge AI Device User Guide

Seeed Studio J2021 ReComputer Edge AI Device

Safety instructions

Read this document and the accompanying operating instructions carefully for the Seeed Studio J2021 reComputer Edge AI Device, and especially observe the safety information. Suppose you do not follow the safety instructions and proper handling guidance for the Seeed Studio J2021 reComputer Edge AI Device. In that case, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications, and repairs must only be completed by a technician or an authorised repair centre.
• Handle the product carefully. Jolts, impacts, acts, or a fall, even from a low height, can damage the product.
• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Intended Use

Improper use of the Seeed Studio J2021 reComputer Edge AI Device can result in short circuits, fires, or other hazards. The Seeed Studio J2021 reComputer Edge AI Device complies with the statutory national and European requirements.

For safety and approval purposes, you must not rebuild and/or modify the product. Read the safety instructions and any accompanying instructions carefully and store them in a safe place. Make this product available to third parties only together with the safety instructions and any accompanying instructions.

Operation

• Consult an expert when in doubt about the operation, safety, or connection of the
  product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself.

Connected devices

• Also, observe the safety and operating instructions of any other devices that are connected to the product.

Disposal

This symbol must appear on the Seeed Studio J2021 reComputer Edge AI Device and any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste.

• inInur Conrad offices
• at the Conrad collection points

Technical data

Power supply

• Input  V/DC, 3 A via USB-C®

Environment

• Usage environment Indoor
• Operating temperature 0 to +60 °C
• Operating humidity max. 95 % RH (non-condensing) (at 40 °C)
• Storage temperature -40 to +85 °C
• Storage humidity<80 % RH (non-condensing)

Others

• Dimensions (W x H x D) (approx. . 13

Customer Support

• Website: www.seeedstudio.com
• Ph: +86-0755-86095676

2008-2025 Seeed Technology Co., Ltd. All rights reserved.

FAQs

Q: hat is the Seeed Studio J2021 reComputer Edge AI Device?

The NVIDIA Jetson Xavier NX module serves as the foundation for the small and potent Edge AI computing platform known as Seeed Studio J2021. It is intended for use in robotics, AI inference, computer vision, and intelligent edge applications that demand both energy efficiency and performance.

Q: What operating system does the J2021 run?

The NVIDIA JetPack SDK, which powers Ubuntu 20.04 LTS and includes CUDA, cuDNN, and TensorRT for AI acceleration, powers the J2021. Installing customised Linux distributions that work with Jetson platforms is another option.

Q: Can I use the J2021 for AI model inference?

AI frameworks such as TensorFlow, PyTorch, and ONNX are supported by the J2021. It makes use of TensorRT and CUDA to deploy deep learning models at the edge and perform high-speed AI inference.

Q: Can I expand the storage of the J2021?

Indeed. For extra storage, the J2021 supports USB external drives and M.2 NVMe SSDs (2280).

Q: Does the J2021 support Docker containers?

Indeed. Docker and the NVIDIA Container Runtime are pre-enabled in JetPack for the J2021. This makes it simple to use GPU acceleration to deploy containerised AI workloads.

Q: Can I mount the J2021 in an enclosure or cabinet?

DIN-rail and wall-mount options are supported by the small aluminium housing. To maintain ideal operating temperatures, make sure there is enough ventilation.

Q: Does Seeed provide software examples and tutorials?

Indeed. Seeed’s official Wiki and GitHub repositories provide a wealth of examples, AI demonstrations, and developer guides. These resources include examples of IoT use cases, robotics, and vision AI.

Q: Is the J2021 suitable for 24/7 operation?

Indeed. With a fanless, robust aluminium chassis designed for continuous operation, the J2021 is dependable for deployment in production settings at all times. For users looking for an alternative Edge AI device, you can also check our guide on the Seeed Studio J3011 reComputer Edge AI Device for a similar industrial AI solution.