Soundcore AeroClip by Anker Open Ear Earbuds User Manual

Soundcore AeroClip by Anker Open Ear Earbuds

Overview

1. LED Indicator
2. C-Bridge with Tap Control Area
3. The Tap Control Area covers the entire C-bridge.
4. Sound Outlet
5. USB-C Charging Port
6. Charging Case Button

Powering On

1. Remove the protective films from the earbuds.
2. Return the earbuds to the case and close the case.
3. Reopen the case to power on the earbuds and enter pairing mode.
4. Select “Soundcore AeroClip” from your device’s Bluetooth list to connect.
5. When pairing, the LED indicator will start flashing white.
6. After the pairing is successful, the LED indicator will stay on for 2 seconds and then go off.

Manual Pairing

To manually enter Bluetooth pairing mode:

1. Return the earbuds to the charging case.
2. Leave the case open, then press and hold the charging case button for 3 seconds until the LED indicator starts flashing white.
3. The earbuds will enter pairing mode. Proceed to pair with your device.

Charging

1. Place the earbuds in the charging case and close it.
   • Ensure the earbuds and the USB-C charging port are fully dry before charging.
2. Connect the charging case to a power supply using the provided USB-C charging cable.
   • A full battery recharge of the charging case takes about 2 hours, and 10 minutes of charging offers 3 hours of playtime.

Charging

• Fully dry off the earbuds and the USB port before charging.
• Use a certified USB-C charging cable and
• charger to prevent any damage.
• Fully charge both the earbuds and the charging case before first use.
• Place the earbuds in the charging case and close it.
• Connect the charging case to the power supply by using a USB-C charging cable.
• Alternatively, position the charging case at the centre of your wireless charger for wireless charging.
• The LED indicators on the charging case indicate the charging status.

Wearing

1. Choose the EarTips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

• Your earbuds come with multiple pairs of EarTips, among which the Medium-sized are pre-installed.

Powering On/Off

Open the charging case, and the earbuds will automatically power on. To power off, place the earbuds in the charging case and close it.

• The earbuds will automatically power off after 30 minutes if no device is connected.

Bluetooth Pairing

1. Open the charging case, and the earbuds will automatically enter the Bluetooth pairing mode. • The 3 LED indicators on the charging case will flash white in sequence continuously.
2. Select “Soundcore Life P3” on your device’s Bluetooth list to connect. When successfully connected, the LED indicators on the charging case will turn white for 3 seconds.

• Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
• Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
• Mono mode: When Bluetooth is connected, you can use either one of the earbuds by placing the other one into the charging case.
• When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.

Controls

Music

Calls

Mono Mode

Soundcore App

Download the Soundcore app to enhance your experience.

• EQ settings: The app offers more than 20 EQ settings to optimise your experience while enjoying various music genres.
• Noise cancellation: Choose an active noise cancellation mode to reduce ambient noise according to your surroundings.
• Transport: Targets low-end frequencies like engine and road noise for peaceful journeys and commutes.
• Outdoor: Reduces ambient sounds in cities, fewer distractions.
• Indoor: Reduces voices and mid-frequency noise from coffee shops and other indoor spaces.

Earbuds Firmware Upgrade

You will be informed once the new version of firmware is detected when you connect the Soundcore Life P3 Noise-Cancelling Earbuds to the app. Ensure the earbuds are placed in the charging case, and the case remains open until the firmware upgrade is completed. During the upgrade, ensure the earbuds are being charged and avoid any operation.

Reset

Specifications

Specifications are subject to change without notice.

• Driver size:11 mm x 2
• Frequency response:20 Hz – 20 kHz
• Impedance:16 Ω
• Waterproof level: IPX5
• Bluetooth version n: V 5.0
• Bluetooth range:15 m / 49 ft

Customer Support

• Website: https://www.soundcore.com/
• Tel: +1 (800) 988-7973