Close Menu
    Other

    Soundcore Sport x10 True Wireless Headphones User Manual

    By Updated:1 Comment4 Mins Read
    soundcore-sport-x10-True-Wireless-Headphones-Featured

    soundcore logoSoundcore Sport x10 True Wireless Headphones

    soundcore-sport-x10-True-Wireless-Headphones-Product

    Charging

    • Fully dry off the earbuds and the USB port before charging.
    • Use a certified USB-C charging cable and charger to prevent any damage.
    • Fully charge both the earbuds and the charging case before first use.

    soundcore-sport-x10-True-Wireless-Headphones-Figure-1

    1. Place the earbuds in the charging case and close it.
    2. Connect the charging case to the power supply by using a USB-C charging cable.
    3. The LED indicator on the charging case indicates the charging status.

    Wearing

    soundcore-sport-x10-True-Wireless-Headphones-Figure-2

    1. Choose the Ear Tips that fit your ears best.
    2. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

    Your earbuds come with 5 pairs of Ear Tips, among which the Medium-sized are pre-installed.

    Powering On/Off

    soundcore-sport-x10-True-Wireless-Headphones-Figure-3

    • Open the charging case, and the earbuds will automatically power on.
    • To power off, place the earbuds into the charging case and close it.
    • The earbuds will automatically power off after 10 minutes if no device is connected.
    • To manually power on, press and hold the multi-function button on both earbuds for 3 seconds.

    Bluetooth Pairing

    soundcore-sport-x10-True-Wireless-Headphones-Figure-4

    1. Open the charging case, and press the button on the charging case for 3 seconds to enter Bluetooth pairing mode.
      • The 3 LED indicators on the charging case will flash white in sequence continuously.
    2. Select “Soundcore Sport X10” on your device’s Bluetooth list to connect.
      • When successfully connected, the 3 LED indicators will turn white for 3 seconds and then turn off.

    Pairing with another device

    • Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
    • Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.

    Mono mode

    • When Bluetooth is connected, you can use either one of the earbuds by placing the other one into the charging case.
    • When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
    • When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.

    Controls

    Stereo Mode

    Play/PausePress twice (R)
    Next trackPress twice (L)
    Volume upPress once (R)
    Volume downPress once (L)
    ANCPress and hold for 2 seconds(R/L)
    Answer a callPress once(R/L)
    End a call/Reject a callPress and hold for 2 seconds(R/L)

    Mono Mode

    Play/PausePress twice
    Answer a callPress once
    End a call/Reject a callPress and hold for 2 seconds
    Activate Siri or other voice assistant software

    Reset

    You might need to reset the earbuds if you experience any connectivity problems or function issues.

    soundcore-sport-x10-True-Wireless-Headphones-Figure-6

    1. Place the earbuds in the charging case and leave the case open.
    2. Press and hold the button on the charging case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence. This confirms that the reset was successful and your earbuds can be connected normally.

    Soundcore App

    Download the Soundcore App to customise the user interface (e.g. adjust volume, control playback, activate Siri), adjust EQ, switch ANC modes, update firmware, and explore more.

    soundcore-sport-x10-True-Wireless-Headphones-Figure-5

    Specifications

    Specifications are subject to change without notice.

    Input5 V  0.5 A
    Rated output power5 mW (@1% THD)
    Battery capacity55 mAh x 2 (earbuds); 540 mAh (charging case)
    Charging time2 hours
    Playtime

    (varies by volume level and content)

    		Up to 8 hours

    (Total 32 hours with the charging case)

    Driver size10 mm x 2
    Frequency response20 Hz – 20 kHz
    Impedance32 Ω
    Waterproof levelIPX7(earbuds)
    Bluetooth version5.2
    Bluetooth range10 m / 33 ft

    Customer Support

    Share.

    Related Posts

    View 1 Comment

    1 Comment

    Leave A Reply