Honeywell HT-906 Series Power Air Circulator
Introduction
The Turbo Force® High Velocity Air Circulator Fans are aerodynamically designed to give you the versatility of changing this fan’s angular direction simply by adjusting the fan to the desired angular output (Fig.1). Upon using this fan, you will feel a strong and powerful air stream that will quickly move air to provide a cooling effect.
FOR ENERGY SAVINGS ALL YEAR
Honeywell Air Circulator Fans can help save energy and can lower monthly utility bills all year round. Our air circulators increase the distribution of cooler air from your air conditioner or warmer air from your heating system, creating a vortex of air flow for increased comfort. Increased air flow allows the air conditioning and heating systems to be used at lower settings to help save you money.
In the summer
Circulate cool air by using with window or central air conditioning. Circulate cool air upstairs.
In the winter
Circulate warm air. Position your air circulator in an open location for upward air movement. Run it on a low setting to move the hotter air from the ceiling and circulate the warmer air throughout the room.
Safety Instructions
- Use this fan only as described in this manual. Other uses are not recommended; they may cause fire, electric shock, or injury to persons.
- This product is intended for household use ONLY and not for commercial, industrial, or outdoor use.
- To protect against electric shock, do not place the an in a window, immerse the unit, plug, or cord in water, or spray with liquids.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet.
- If the plug does not fit fully in the outlet, reverse the plug.
- If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
- To disconnect the fan, first turn the control to the OFF position, grip the plug, and pull it from the wall outlet. Never pull by the cord.
- Do not operate the fan in the presence of explosive and/or flammable gases or vapors.
- Do not place the fan or any of its parts near an open flame, cooking, or other heating appliances.
- Do not operate the fan with a damaged cord or plug, or if the product malfunctions, is dropped, or damaged in any manner (see warranty).
Fused Safety Plug
This fan features a fused safety plug, which is designed to cut off the electric current to the fan if an
electrical fault occurs. Please see below for more information on how to properly use your fan and
replace the safety plug fuse, if needed.
Servicing Instructions
- Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
- If your fan loses power and you suspect that the fuse on your fan has blown, you should first remove the spare fuse holder attached to the cord plug. Remove the spare fuse from the plastic spare fuse holder, and set the spare fuse aside.
- You can gain access to the blown fuse by sliding open the door found on the side of the plug. Slide the door outward until the blown fuse is fully visible.
- Remove the blown fuse and snap the replacement fuse into place. Risk of fire. Replace the fuse only with a 2.5-amp, 125-volt fuse (provided with the product). Fully close the fuse door by sliding it back into place. Discard the blown fuse. The plug should now be ready for normal use.
- Risk of fire. Do not replace the attachment plug. Contains a safety device (fuse) that should not be removed. Discard the product if the attached plug is damaged.
- If you need further information on how or when to replace the fuse in the safety plug, please contact the Kaz Consumer Relations Department by visiting our
OPERATION
- Be sure the fan is in the OFF position.
- Place your fan on a dry, level surface.
- Plug the power cord into a polarized 120-volt AC wall outlet.
- To operate, turn the control knob to the desired fan speed: HIGH (III), MEDIUM (II), or LOW (I) (Fig. 2).
- For wide area oscillation, push down on the oscillation knob. To stop it, pull up on the knob. (Fig. 3)
- Adjust the fan to the desired angular air output direction.
Cleaning and Maintenance
- Use only a soft cloth or cotton swab to gently wipe the fan clean.
- To clean between the grilles, we recommend using a pipe cleaner, vacuum cleaner, flexibledusternd or compressed air to gently remove the dust.
- DO NOT immerse the fan in water. Honeywell HT-906 Series Power Air Circulator and never allow water to drip into the motor housing.
- DO NOT use gasoline, paint thinner, or other chemicals to clean the fan.
Consumer Relation
- Kaz USA, Inc. Consumer Relations Dept. 250 Turnpike Road Southborough, MA 01772.
- Call us toll-free at: 1-800-477-0457
- E-mail: consumerrelations@kaz.com
- Or visit our website at: www.HoneywellFanSavings.com
- Please be sure to specify a model number.
1 Year Warranty
- Th1-yearear limited warranty applies to the repair or replacement of the product found to be defective in material or workmanship.
- This warranty does not apply to damage resulting from commercial, abusive, or unreasonable use, or supplemental damage.
- This warranty applies only to the original purchaser of this product from the original date of purchase.
- This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.
- Return defective product to Kaz USA, Inc. with a brief description of the problem. Include proof of purchase and a $10 US/$15.50 CAN check or money order for handling, return packing, and shipping charges. Please include your name, address, and a daytime phone number.
- You must prepay shipping charges. We suggest having tracking or delivery confirmation. Send to
- The U.S.A.: Kaz USA, Inc
Attn: Returns Department 4755 Southpoint Drive Memphis, TN 38118 USA. - In Canada: Kaz Canada, Inc.
Attn: Returns Department 510 Bronte Street South Milton, ON L9T 2X6 Canada.
- The U.S.A.: Kaz USA, Inc
©2012 Kaz USA, Inc. All Rights Reserved. P/N: 31IM0906190
Customer Service
- website: www.HoneywellFanSavings.com
- Ph: 1-800-477-0457.
FAQs
Q: Is there oscillation in the HT-906 fan?
Ans: The HT-906 does not oscillate, sorry. Rather, it has a tilting head that can be manually adjusted to a vertical inclination to focus airflow where it is required.
Q: Is the HT-906 sufficiently quiet for use in a bedroom or office?
Ans: The HT-906 produces a moderate noise level, louder on high speeds, but generally suitable for offices and living rooms.
Q: What are the HT-906’s weight and dimensions?
Ans: The fan is easy to carry and store because it is small and light, measuring around 11 inches in diameter and weighing about 3.5 pounds.
Q: Is it possible to operate the fan outside?
Ans: The electrical components may sustain damage from exposure to dampness or rain.
Q: Is a safety mechanism in place to stop overheating?
Ans: Indeed, the HT 906 has thermal protection, which prevents harm to the fan by instantly turning off the motor if it overheats.
Q: How frequently should the fan be cleaned?
Ans: To avoid dust accumulation on the blades and grill, clean the fan at least once a month, or more frequently i dusty areas, for best results.
Q: Can HVAC efficiency be increased with the HT-906?
Ans: Yes, the HT-906 can help distribute heated or cooled air uniformly around the room by improving air circulation, which would lessen the burden for the HVAC system.
