KLARSTEIN 10047034 Air Fold Smart Ceiling Fan
Safety Instructions
- Never attach the fan to a power point, but to the ceiling itself.
- The minimum distance between the blades of the fan and the floor must be more than 2.3 m.
- The minimum carrying capacity of the hook from which the fan is hung must be 100 kg.
- Make sure to install all poles with disconnection switches having a contact separation of at least 3 mm between poles in the supply wiring to the ceiling fan.
- The model or type reference of luminaries that may be installed in fans that are constructed for his purpose.
- Switch off the power before connecting.
- The electrical wiring must be in accordance with the local regulations.
- The fan must be properly earthed to avoid the risk of electric shocks.
- Never mount the fan in a moist or wet room.
- Be careful when working near the rotating blades.
Installation
- Fasten the mounting plate to a ceiling joist with two screws, lock washers, and washers. The ceiling joist must be strong enough to support the weight of the moving fan.
- Attach the fan components to the mounting plate. Align the ball joint of the fan with the suspension lug of the mounting plate.
- Insert the remote control receiver between the clamp and the ball joint.
- Connect the internal cables by plugging the two plastic connectors together until they snap into place.
- Connect the cables of the grounded power source to the terminal block.
- Slide the cover over the mounting plate. Make sure that you do not disconnect any cables in the process.
- Attach the rotor blades with the spring KLARSTEIN 10029345 FIGO Ceiling Fan washers and screws that are already on the motor.
- Connect the lamp cables by plugging the two plastic connectors together until they snap into place.
- Attach the lamp socket to the mounting brackets and fix it with three fixing screws and star washers. Make sure that you do not disconnect any cables in the process.
- Attach the bulbs (max. 42 W E14, not included) to the lamp holder.
- Attach the lampshade to the socket by turning it clockwise.
Operation
- Press the Speed button on the remote control to select a speed: HI: High • MED: Medium • LOW: Low • OFF: Off.
- The switch on the motor housing can be used to influence the direction of the airflow generated by the rotor blades.
- Cold Weather: Set the switch to RIGHT to allow the blades to distribute the warm air under the ceiling to the room below.
- Warm weather: set the switch to LEFT so the blades create a cooling airflow and distribute it into the room.
- Press the ON/OFF light button on the KLARSTEIN 10029345 FIGO Ceiling Fan remote control to turn the light on the fan on and off.
Remote Control
- Use the remote control to change the wind speed and turn the light or fan on/ off. Slide back the battery compartment door and insert two AAA batteries (not included).
- Make sure that you insert the batteries the right way round. Then close the battery compartment again. Make sure that the battery compartment is always firmly closed.
- Do not place the remote control in direct sunlight. Do not attempt to recharge dead batteries. Only charge batteries that are expressly intended for this purpose. Do not dispose of batteries in a fire to prevent explosions.
Troubleshooting
| Problem | Possible cause | Approach |
| The fan does not start. | Fuse or circuit breaker blown. | Check your fuses. |
| Loose cable connections. | Check all connections for loose cables. | |
| Speed was not set correctly. | Select a speed. | |
| The fan makes noise. | The upper cap touches the ceiling. | Make sure there is a minimum distance of 3 mm between the top cap and the ceiling. |
| Screws of rotor blades are loose. | Tighten all screws. | |
| The ceiling fan is not properly attached to the ceiling. | Tighten all screws in the suspension plate. | |
| Speed is not adjusted correctly. | Select a speed. | |
| The fan is wobbling. | Rotor blades are not adjusted horizontally to the ceiling. | Move the fan so that all blades are at the same height to the ceiling. |
| Screws of the rotor blades are loose. | Tighten all screws. |
Technical Data
| Item number | 10047034, 10047035 |
| Power supply | 220-240 V ~ 50/60 Hz |
| Fan power | 29 W |
| Lamp type | LED 28 W Â Â Â Â Â dimmable |
| Useful luminous flux | 4175 lm (at 4000 K) |
| Colour temperature | 3000 K, 4000 K, 6500 K |
| Colour Rendering Index (CRI) | >80 |
| Lifetime for LED + OLED light source | 30.000 |
| Standby power | 0 W |
| Maximum volume flow | 172 m3 |
Disposal
By disposing of it according to the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
Environmental Safety
- During cooking, make sure that there is sufficient air KLARSTEIN 10035380 ELEONORA Range Hood supply so that the cooker hood can operate efficiently and with low operating noise.
- Adjust the fan speed to the amount of steam KLARSTEIN 10047034 Air Fold Smart Ceiling Fan produced during cooking. Use the intensive mode only when necessary.
- Switch off the cooker hood when you no longer need it.
- Switch off the lighting when you no longer need it.
- Clean the filter at regular intervals and replace it KLARSTEIN 10047034 Air Fold Smart Ceiling Fan if necessary to increase the effectiveness of the ventilation system and prevent fire hazards.
- Always put the lid on when cooking to reduce cooking steam and condensation.
Customer Service
Manufacturer & Importer (UK)
- Manufacturer:Â Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
- Importer for Great Britain:Â Berlin Brands Group UK Ltd PO Box 42 272 Kensington High Street, London, W8 6N, D United Kingdom
- Website: Â http://www.klarstein.com
- Scan the QR code to get access to the latest user manual KLARSTEIN 10035380 ELEONORA Range Hood and more product information.
Dear Customer
Congratulations on purchasing this device. Please read the following KLARSTEIN 10038383 FIRE SMART Fireplace Heater instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.
FAQs
How do I control the fan speeds?
You can use the wall switch or the provided remote control to change the fan speed. For accurate airflow management, the fan usually has three to five speed options.
What is the purpose of the foldable blades?
When the fan is off, the folding blades can retract, giving the device a sleek, small appearance. When the fan is running, the blades can expand for the best airflow.
Is the fan compatible with smart home systems?
Indeed, the KLARSTEIN Air Fold is compatible with popular smart home helpers like Google Assistant and Amazon Alexa, and it has Wi-Fi connectivity.
How do I set up the Wi-Fi connection?
Follow the in-app directions on the KLARSTEIN mobile app to link the fan to your home Wi-Fi network.
Can I schedule the fan to turn on or off automatically?
Yes, you may set up personalised timings and schedules for automated operations using the app, depending on your preferences.
What size room is this fan suitable for?
The fan provides effective airflow for medium-sized spaces and is perfect for rooms up to about 25 square meters (270 square feet).
1 Comment
Pingback: Do Ceiling Fans Use a Lot of Electricity? Energy Usage!