INSIGNIA NS-S10CCBK-C Cross Cut Shredder
Safety Instructions
- Avoid touching the document feed opening with your hands
- The product is not intended for use by children (the product is not a toy)
- Do not spray or keep any aerosol products in or around the shredder
- Avoid loose clothing or jewelry touching the document feed opening
- Shredder oil only
- Avoid getting hair near the document feed opening
- Sharp edges, do not touch
- This equipment is not intended for use by children.
- Avoid touching the media feed opening with your hands, clothing, or hair.
- Unplug this equipment when not in use for an extended period.
- Warning! Before switching the machine on, make sure that you observe all safety instructions.
- Keep in the OFF position when the shredder is not in use for prolonged periods of time.
- Empty the wastebasket frequently.
- The device may not be operated with a damaged power cord.
- For indoor use only.
- The machine allowed a maximum shred of 10 sheets of paper (75gsm) or 1 credit card, or 1 CD at a time.
- The socket-outlet must be installed near the equipment and must be easily accessible during use.
Package Content
- Cross-cut shredder with wastebasket
- Quick Setup Guide
Feature
- Shreds up to 10 sheets of paper at one time
- Destroys credit cards, compact discs, small staples, and small paper clips
- Cross-cut size .2 × 1.4 in. (4 × 35 mm) protects sensitive data
- 5.6 gal (21 L) capacity basket holds shredded waste and is easy to empty
| # | ITEM | DESCRIPTION |
| 1 | Handle | Lets you easily lift up the shredder head to empty the paper inside the waste basket. Make sure that your shredder is turned off before you move it. |
| 2 | Switch | FWD: Sends an item through your shredder. The POWER indicator lights green. OFF: Turns off your shredder. REV: Reverses the paper in the slot to clear a jam or remove unshredded paper. |
| 3 | LED indicators | Overheat: Lights when your shredder has overheated. If this indicator is on, the machine stops shredding and recovers when the indicator is off. The cool-down time is at least 30 minutes. Overload: Lights when trying to shred over the maximum 10 sheets or when the paper is folded. In overload, the cutter turns off automatically. Power: Lights when your shredder is in use. Door open: Lights when the shredder head is not on the wastebasket or when the head is not in the correct position on the wastebasket. |
| 4 | Shredding slot | Insert up to 10 sheets of paper at a time or one credit card or disc at a time. |
| 5 | Window | Let’s see how much shredded material is in the wastebasket. |
Setting
- Place the wastebasket upright on a level surface.
- Attach the shredder head to the basket. Make sure INSIGNIA NS-S10CCBK-C Cross Cut Shredder that it fits properly.
- Place the wastebasket securely in the shredder. Note: Do not use plastic bags to line the wastebasket.
- Connect the power cord to a power outlet. Do not use an extension cord
USING YOUR SHREDDER
- Unpack your shredder, then place it upright on a level surface.
- Make sure that the shredder head is correctly fitted onto the basket.
- Plug the power cord into a standard (120 V AC) outlet. Do not use an extension cord.
- Slide the power switch to AUTO
- Insert paper (up to 10 pages) or one credit card or disc into the shredding slot. Your shredder automatically shreds what you insert.
- If the shredder jams, slide the switch to REV to return the paper, then slide the switch to AUTO. The shredder can be used again if the jam is cleared.
- When the wastebasket is 2/3 full, slide the switch to OFF, unplug the cord from the power outlet, then lift and empty the wastebasket.
Specifications
- Dimensions: 12.7 × 8.3 × 16.8 in. (32.2 × 21.2 × 42.6 cm)
- Cutting style: Cross cut
- Entry width: 8.6 in. (22 cm)
- hred capacity: 10 sheets (75 g/m2 A4 paper disc or credit card 1 Shred size: .2 × 1.4 in. (4 × 35 mm)
- Shred speed: 3 m/1 min.
- Duty cycle: 3 mins ON / 30 mins OFF
- Input: AC 120 V, 60 Hz, 4.5 A
- Net weight: 12 lbs. (5.5 kg)
- Basket capacity: 5.6 gal (21 L)
Troubleshooting
- Make sure that the power cord is plugged into a working power outlet. If the power cord is damaged, replace it.
- Make sure that the shredder head and wastebasket are positioned correctly.
- If the Overheat indicator is on, let it cool for at least 30 minutes. When the indicator is off, you can use your shredder again.
- Change the position of the paper as you insert it.
- The paper may be too thin or crumpled for your INSIGNIA NS-S10CCBK-C Cross Cut Shredder shredder to recognize it. Fold the paper, then reinsert it.
- Slide the switch to FWD.
- Make sure that you only send 10 sheets of paper, one credit card, or one disc through your shredder at a time.
- Slide the switch to REV, remove the paper from the cutter, then
Slide the switch to AUTO, and try again. - Slide the switch to OFF, unplug your shredder from the power outlet, then push the shredded paper down to make sure that it is away from the shredder head.
- Slide the switch to REV to remove extra paper, disc, or credit card from your shredder.
- Make sure that your shredder is on a flat, level surface.
- Make sure that the shredder head and wastebasket are positioned correctly.
- Let your shredder cool at least 30 minutes. When the indicator turns off, you can use your shredder again.
- Make sure that you haven’t put too much paper into your shredder at one time. Slide the switch to REV, remove the paper from the cutter, then try again with less paper.
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
EMC guidance
- Don’t use near active HF Insignia NS-GLSBFSCW1 Glass Scale surgical equipment or the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high.
- Use of accessories, transducers, and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper operation.
- Otherwise, degradation of the performance INSIGNIA NS-S10CCBK-C Cross Cut Shredder of this equipment could result.
One-Year Warranty
Definitions
The Distributor* of Insignia-branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for one (1) year from the date of your purchase of the Product (“Warranty Period”).
How to obtain warranty service?
If you purchased the Product at a Best Buy retail store location or from a Best Buy online website, please take your original receipt and the Product to any Best Buy store. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. To obtain warranty service, in the United States and Canada, call 1-877-467-4289. Call agents may diagnose and correct the issue over the phone.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the country where the original purchase was made.
Customer Support
- Ph: 1-877-467-4289
- Website: www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved
FAQs
What type of shredder is the NS-S10CCBK-C?
As a cross-cut shredder, the NS-S10CCBK-C offers Level P-4 protection for confidential information by cutting paper into tiny, confetti-like pieces both vertically and horizontally.
How many sheets can it shred at once?
Up to 10 sheets of regular 20-pound (75-gram) paper can be fed through this shredder in a single pass.
What is the shred size?
It creates roughly 4 x 35 mm shreds that are challenging to put back together, making it perfect for private and business documents.
How long can the shredder run before needing a cool-down?
The NS-S10CCBK-C can operate continuously for five minutes before needing to cool down for thirty to forty minutes in order to prevent the motor from overheating.
How do I know when the bin is full?
On certain models, the trash can has a viewing window. During use, check frequently if yours doesn’t. Avoid overfilling the bin for both performance and safety reasons.
Does the shredder stop automatically?
Yes, the device can start and stop automatically. After it recognises paper, it starts shredding, and after the material is shredded, it stops.
Can I use shredder lubricant or oil sheets?
In order to keep the blades in good shape and extend the shredder’s lifespan, you can use lubrication sheets or put shredder oil on a piece of paper and run it through. In high-use settings, lubricate once every 30 minutes or once a week.
Is it safe to leave the shredder plugged in?
Although the device can be turned on when not in use, it is safer to turn it off or disconnect it when left alone, especially in the presence of youngsters or pets.
