GOZNEY DOC-0559(03) Outdoor Pizza Oven Instruction Manual

GOZNEY DOC-0559(03) Outdoor Pizza Oven

Safety Instructions

1. Ensure you have fully read, understood, and complied with the cautions & warnings in the Arc Users Manual supplied with the oven.
2. Never attempt to move the oven when it is still warm; wait for it to fully cool first.
3. When moving the oven on the Booster, always lift using the oven lifting points, not the Booster or shelf.
4. Remove anything loose from the Booster and its shelves before moving it.
5. Placing hot items from the oven onto the shelf may damage the coating; use appropriate protection to avoid damage.

What’s In The Box

Gas Oven

• Always disconnect the oven from the gas supply before moving the oven.
• Ensure you’re using a Gozney-supplied gas connector or one that complies with the Standard for movable gas appliances (ANSI Z21.69 / CSA 6.16), and a quick-disconnect device that complies with the relevant Standards (ANSI Z21.41 / CSA 6.9).
• The gas connector and the quick disconnect device or its associated piping should never be used to limit the movement of the appliance.

Installation

• Build the Booster in the area you intend to position the Arc.
• Ensure the surface is stable, level, and capable of supporting the oven’s weight.
• Don’t place any of the parts on an abrasive surface, and avoid damaging the paintwork of the metal parts.

Fixing

• We recommend not fully tightening all nuts and bolts until the Booster has been assembled.
• This will ease the alignment of future fixings. Fully tighten at Step 6.
• Tighten all fixings on the Booster, being careful not to over-tighten
• Before installing Arc, assemble fixings F001 and F003 into the top of the Booster.
• Do not fully tighten these two fixings; there should be no more than 1/16” (2mm) of thread exposed.

Installing Arc

• Ensure fixing F001 and F003 are assembled into the Booster before installing the oven.
• Remove anything loose from the oven before moving.
• Two people should pick up the Arc from the lifting points.
• Never lift Arc on your own.
• Do not use the mouth of the oven as a lifting point.
• Align Arc’s feet with the highlighted recesses. Ensure the feet are fully aligned before moving on.
• Note oven mouth should face the Booster front.
• Tighten the fixing F001 until the Arc is fully secured to the Booster.
• Be careful not to over-tighten, as it can damage the Booster.
• Never use Arc without it being secured to the Booster by F001.