Blaupunkt 5B30P0250 Integrated oven Instruction Guide

Blaupunkt 5B30P0250 Integrated oven

Safety Instructions

• Disconnect the negative terminal of the battery. Refer to the safety notes of the vehicle manufacturer.
• Ensure the positions of the holes are nowhere near the vehicle component to avoid any damage during drilling.
• Ensure cross cross-section of the cable is no less than 2.5mm2 if the positive and negative cables are too long.
• Incorrect installation may result in the malfunction of the device or the car’s sound system.
• The supply voltage requirement is 12V DC with a grounded negative connection.
• Unauthorised dismantling or modification may void the warranty of the device.
• Blaupunkt is not liable for any loss or damage caused or resulting from unauthorized BLAUPUNKT MPA 14120 H Power Amplifier reparation or modification to the device.
• Refer to a Blaupunkt specialist in case of any installation or repair required.
• The device’s core components may be damaged when the car is driven on bumpy roads for a prolonged period of time or if it is used to play non-standard volume level.
• Please do not operate the car radio under BLAUPUNKT MPA 14120 H Power Amplifier in extreme temperature conditions (extremely high temperature or extremely low temperature).
• Ensure the temperature within the car ranges from -10°C to 85°C (Storage temperature: 5°C to 35°C) before connecting to the power supply.
• Solvents, cleaning and scouring agents, as well as dashboard spray and plastics care products, may contain materials that can damage the surface and screen of the device.
• Use only a dry or slightly moistened cloth to clean the device.

Product Description

Operation Instructions

Clock Setting

After connecting the unit to the power, the symbols “0:00” will be visible on the display.

1. Press ” “, the hour figures will flash.
2. Rotate ” K2″ to adjust the hour figures (time should be within 0–23).
3. Press ” “, the minutes will flash.
4. Rotate “K2 ” to adjust the minutes setting (time should be within 0–59).
5. Press ” ” to finish the clock settings. “:” will flash, and the time will be illuminated.

Function Setting

1. Rotate ” K1 ” to choose the cooking function you require. The related symbol will be illuminated.
2. Rotate ” K2 ” to adjust the temperature.
3. Press ” ” to confirm the start of cooking.
4. If step 2 is ignored, Press ” ” to confirm the start of cooking, and the default time is 9 hours, the default temperature will display on the LED.

Lamp Setting

1. Rotate”K1″ to select the relevant function, then the corresponding icon will be on.
2. Press the” ” button to start, “0:00″ and the lamp icon” ” will light up, ” : ” will flash.

Inquiring function

In the following states, you can use the inquiry function, and after 3 seconds, return to the current state.

1. During working state, if the clock is set, press the” ” button to see the current time; if the reminder function is set, press the” ” button to see the time of the reminder.
2. In the reminder state, if the clock is set, press the ” ” button to see the current time.

Child lock function

To Lock : press ” ” and ” ” simultaneously for 3 seconds, there will be a long “beeping” sound
and the ” ” will be illuminated.

Lock quitting: press ” ” and ” ” simultaneously for 3 seconds, there will be a long “beeping” sound indicating the child-lock is released.

Reminder Function

This function will help to remind you to start cooking at a certain time from 0:01 to 9:59. Only when the oven is in standby mode, the reminder can be set. Follow below to set the reminder:

1. Press the reminder setting button.
2. Rotate ” K2 ” to set the hour time of the reminder. (Time should be within 0–9).
3. Press the reminder setting button again.
4. Rotate “K2 ” to set the minute time of the reminder. (Time should be within 0–59).
5. Press ” ” to confirm the setting. The time will count down.

Start/Pause/Cancel Function

1. If the cooking time has been set, press ” ” to start cooking. If the cooking is paused, press ” ” to resume cooking.
2. During the cooking process, press ” ” once to pause the cooking. Press ” ” twice to cancel the cooking.

Energy-Saving Function

1. In the waiting state and the reminding state, press ” ” for three seconds, the LED display will go off and set to energy-saving mode.
2. If no operation for in10 minutes under the waiting state, the LED display will go off and go into energy-saving mode.
3. Under the energy-saving mode, press any key or rotate any can quit the energy-saving mode.

Pyrolytic Function

This function allows you to clean thoroughly the oven cavity

1. Rotate „ K1 „ to select the pyrolytic function. LED will display „ PyR „.
2. Press „  “ to confirm the cooking. And the default time is 2 hours, „ PyR „ will display on the LED. 3> Rotate „ K1 „ to change the pyrolytic time. The timer can be set to 1:30 or 2:00 hours

ACCESSORIES

Wire shelf: For grill dishes, a cake pan with items for roasting and grilling.

Slider bracket.. These shelf support rails on the right and left sides of the oven can be removed for cleaning the oven walls. (only for specific models)

Universal pan: For cooking large quantities Blaupunkt 5B30P0250 Integrated oven of food such as moist cakes, pastries, frozen food, etc, or for collecting fat/ spillage and meat juices. Telescopic runner: Some models might come with telescopic runners to facilitate the use of the oven.Telescopic runner: Sommodels comes with telescopic runners to facilitate the use of the o Cleaning can be done by unscrewing the screws used to fix it. (only for specific models)

SHELF PLACEMENT WARNING

To ensure the oven shelves operate safely, the correct placement of the shelves between the side rails is imperative. This will ensure that during careful removal of the shelf or tray, hot food items do not slide out.

Bulb Replacement

1. Disconnect power from the mains outlet or switch off the circuit breaker of the unit’s mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
   

Ventilation

When cooking is finished or in a pause state or waiting state, if the oven’s center temperature is over 75 degrees, the cooling fan will continue working for Blaupunkt 5B30P0250 Integrated oven 15 minutes. Or when the oven’s center temperature becomes lower than 75 degrees, the cooling fan will stop in advance

Installtion

Installation

Parts disassembly

• Step 1: Open the oven door completely.
• Step 2: Pull the hinge locks forward on both hinges until they stop.
• Step 3: Raise the door so that it is at a 30° angle from the front of the oven. Hold the door with one hand on each side. Lift the door up and out.

The oven door components’ disassembly.

• Step 1: Disassemble the door from the oven, then put it on the bench horizontally, see 2.1.
• Step 2: Open the door rotation bracket assembly, refer to the action in the following picture.
• Step 3: Lift the door’s outer glass and pull it out, then take the middle glass out in the same way ;
• Step 4: Use one hand to push the door frame up cover toward middle part (1), then lift the cover with the other hand (2);
• Step 5: See the screwdriver to disassemble the rotation bracket assembly, then take it out from the door bracket
• Step 6: Change the new rotation bracket assemblies and insert them into the snap joints, then fix them with a screw.
• Step 7: Assemble the new door frame up coven the brack, et and make sure it is sta.le;
• Step 8: Assemble the door middle glass and pay attention that it should be put at the second floor of the door frame to cover the glass door, and a 4-layer glass door middle glass should be pplacedheehe firsfloorr.
• Step 9: Assemble the outer glass and accomplish the replacement work.

CLEANING AND MAINTENANCE

• Before any maintenance and cleaning, disconnect the power.
• Set all controls in the OFF position.
• Wait until the inside of the unit is not hot but Blaupunkt 5B30P0250 Integrated oven only slightly warm- cleaning is easier than when warm.
• Clean the surface of the unit with a damp cloth, softbrushh or finespongeg,, and then wipe dry. In case of heavy soiling, use hot water with non- non-abrasive cleaning product.
• For cleaning the glass of the oven door, do not use abrasive cleaners or sharp metal scrapers; these can scratch the surface or lead to the glass being damaged.
• Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
• Do not use a high-pressure cleaner for cleaning the unit. The baking pans may be washed in mild detergent.

Disclaimer

• In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special, consequential damages to property or life, or whatsoever arising out of or connected with the use or misuse of our products.
• No warranty, whether expressed or implied,  is provided in the U.S. or Canada.

Recycling and Disposal

• Do not dispose of your old unit in the household trash! Use the return and collection systems available to dispose of the old device. This manual may be updated from time to time without notice.

Customer Service

• Competence Center
  • 2N-Everpol Sp. z o.o. Ul. Puławska 403A 02-801 Warsaw, Poland
  • Call: +48 22 688 08 00
  • E-mail: info@everpol.pl
  • Visit: www.blaupunkt.com
• In case of questions or problems
  • Tel: 00 48 22 688 08 33
  • E-mail: sda@blaupunkt.pl

FAQs

Q: What are the key installation requirements for the Blaupunkt 5B30P0250 integrated oven?

Ans: Make sure the oven is placed in a cabinet that has adequate ventilation and at least 5 cm of space around it. It needs a specific electrical connection that satisfies the manual’s voltage and current requirements. Installation by a professional is advised.

Q: Can I install the oven myself or should I hire a professional?

Ans: We strongly advise contacting a trained electrician or appliance installer to ensure safety and compliance with local codes, even though some users might feel comfortable doing the installation themselves.

Q: What is the correct electrical supply for this oven?

Ans: A 230V AC power source with a dedicated circuit breaker rated for at least 16A is normally needed for the Blaupunkt 5B30P0250. For precise specs, consult the product’s label and handbook.

Q: How do I operate the oven’s basic functions?

Ans: To select the cooking mode (conventional, grill, or fan-assisted), turn the function selector knob. Use the temperature control dial to adjust the temperature. When the oven reaches the desired temperature, an indicator light will go out.

Q: What cooking modes does this oven support?

Ans: Conventional bake, fan-assisted bake, grill, thaw, and occasionally speciality modes like pizza or eco-bake are examples of common modes. For comprehensive mode descriptions, consult the function guide in the handbook.

Q: Does the oven have a self-cleaning function?

Ans: Pyrolytic self-cleaning is not a feature of the Blaupunkt 5B30P0250. Cleaning must be done by hand on a regular basis.

Q: How do I replace the oven light bulb?

Ans: Make sure the oven is cool before unplugging it. Take off the oven’s light cover, unscrew the lightbulb, and swap it out for the 25W, 300°C heat-resistant bulb that the handbook says to use.

Q: What accessories are included and compatible with this oven?

Ans: Usually, a baking tray and a wire rack are included with the oven. If compatible, you can buy further attachments like roasting pans or pizza stones separately.