Labnet S2030-LS-B Orbit LS Low Speed Shaker User Manual

Labnet S2030-LS-B Orbit LS Low Speed Shaker User Manual

Introduction

Congratulations on purchasing your Labnet Orbit™ LS Low Speed Orbital Shaker. A large shaker orbit and low speed make this orbital shaker useful for staining and destaining gels, washing blots, and general mixing. The shaker is supplied with a 29.5 x 29.5 cm stainless steel flat platform and a non-slip rubber mat to keep plates, dishes, and other sample containers in place. Safe for use in temperature-controlled environments, the small profile of this shaker makes it ideal for use in incubators such as the Labnet 311 and 611 series.

Unpacking

The Labnet Orbit LS Low Speed Orbital Shaker includes the following components:

• Labnet Orbit LS Low Speed Orbital Shaker
• Flat platform (29.5 x 29.5 cm)
• Instruction Manual

Safety Information

Do not shake flammable or explosive samples.

• Do not use the shaker near water sources. Be sure that water doesn’t get on the device, especially during the cleaning procedures.
• Do not expose the shaker to aggressive vapors (e.g., organic solvents).
• Do not insert objects into the shaker (such as a screwdriver or metal rods).
• Never operate the shaker without the platform securely attached.
• Hazardous samples should be shaken only in appropriate containment vessels.

Symbols and Conventions

The following chart is an illustrated glossary of the symbols that may be used in this manual or on the product.

• Indicates the presence of a potential hazard which could result in electrical shock.
• Identifies a Protective Earth (PE) terminal, which is provided for connection of the supply system’s protective earth (green or green/yellow) conductor.
• Do not put your fingers between the platform and the housing. Danger of mechanical injury

Installation

Device Placement

When selecting the right place for the device, please consider the following:

• Put the device on a smooth, horizontal, and stable surface.
• Leave enough space beyond the device for normal air circulation (6 in./15 cm minimum).
• Leave enough space around the device for easy access and maintenance.
• Avoid locations subject to shocks and vibrations.
• Avoid locations subject to frequent power fluctuations or power losses. It may affect shaker performance.

NOTE: There has to be easy access to the shaker control panel and main plug in case of emergency.

Attaching the Power Cord

First, connect the main power cord to the shaker. Then, connect the plug end of the cord to a grounded wall socket. Avoid lines on which powerful electric motors, refrigerators, and similar devices are connected.

• Be careful when you plug the cord into a grounded wall socket.
• Do not touch the plug with wet hands.
• Do not pull the plug by the cord.

Operating Instructions

Control Panel

1. POWER switch: Turns the shaker ON (power switch illuminates) or OFF.
2. SPEED knob: Sets the shaker speed.
3. TIME knob: Sets the timed operation.
4. HOLD yellow signal light: Illuminates when the shaker is set to HOLD (continuous operation).
5. START/STOP button: START or STOP the shaking operation.
6. RUN green signal light: Illuminates when the shaker is running.

Maintenance and Cleaning

• No routine maintenance or lubrication is required.
• It is recommended that the shaker be kept clean to ensure long trouble-free operation.
• The outside housing can be cleaned with a soft, damp cloth when needed.
• Do not use any aggressive or abrasive cleaners (acetone,   nitro, polish, etc.).
• This may permanently damage the shaker finish.

Specifications

Troubleshooting

Should you have a question about the operation of the Labnet Orbit™ LS Low Speed Orbital Shaker or if service is required, contact Customer Service. Do not send in a unit for service without first calling to obtain a repair authorization number. Should the unit require service return, it should be properly packaged to avoid damage. Any damage resulting from improper packaging shall be the responsibility of the user.

Accessories

Limited Warranty

Corning Incorporated (Corning) warrants that this product Labnet S2030-LS-B Orbit LS Low Speed Shaker will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. Corning’s sole obligation shall be to repair or replace, at its option, any product or part thereof that proves defective in material or workmanship within the warranty period, provided the purchaser notifies Corning of any such defect. Corning is not liable for any incidental or consequential damages, commercial loss, or any other damages from the use of this product.

Corning’s Customer Service team will help arrange local service where available or coordinate a return authorization number and shipping instructions. Corning may elect for on-site service for larger equipment. Some states do not alllimitationsion on the length of implied warranties or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights. You may have other rights that vary from state to state. No individual may accept for, or on behalf of Corning, any other obligation of liability, or extend the period of this warranty.

Warranty/Disclaimer

Unless otherwise specified, all products are for research use or general laboratory use only.* Not intended for use in diagnostic or therapeutic procedures. Not for use in humans. Corning Life Sciences makes no claims regarding the performance of these products for clinical or diagnostic applications. *For a listing of US medical devices, regulatory classifications, or specific information on claims, visit www.corning.com/resources.

Equipment Disposal

According to Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE), this product is marked with the crossed-out wheeled bin and must not be disposed of with domestic waste. Consequently, the buyer shall follow the instructions for reuse and recycling of waste electronic and electrical equipment (WEEE) provided with the products and available at www.corning.com/weee.

Customer Service

• Website: www.labnetlink.com.
• Visit: www.corning.com/lifesciencs
• Visit: www.corning.com/resources
• USA/Canada: 1.800.492.1110
• Others: +1.978.442.2200
• North America: 978.442.2200
• Australia/New Zealand: 61 427286832

FAQs

What applications is the Labnet Orbit LS Low Speed Shaker best suited for?

For delicate mixing jobs requiring slow, steady orbital shaking, like cell culture incubation, hybridisation, staining techniques, and sample dissolution, the S2030-LS-B is perfect.

What is the shaking speed range of this shaker?

It can precisely handle fragile samples because it runs in the low speed range of 20 to 200 RPM.

What is the shaking orbit diameter?

The shaker’s 19 mm orbit allows for steady and even agitation.

What is the maximum load capacity of the shaker platform?

When in use, the shaker can securely accommodate up to 7 kg (15.4 lbs) of labware.

How is the shaking speed controlled?

A digital control panel with user-friendly buttons and an LED display allows for precise speed setting.

Is the platform removable for cleaning?

Indeed, the platform is easily detachable for comprehensive maintenance and cleaning.