Ronix 8627C 20V Cordless Blower
Safety Instructions
Read all safety warnings and instructions. Before starting up the device, it is important to have read and understood these instructions and to follow them carefully. The instructions are for your own safety and that of others. They allow you to have a long and trouble-free use of your device.
Read the instructions carefully. Be familiar with the controls and proper use of the machine. Never allow children or persons unfamiliar with these instructions to use the machine. Local regulations can limit the age of the operator.
Prepation
Use ear protection and protective goggles. Wear this during the entire time the machine is in use. Do not wear loose clothing or jewelry that could be drawn into the suction opening. Keep long hair away from the vents. Always perform a visual inspection before use to ensure that bolts and other fasteners are secure, the housing is undamaged, and guards are in place.
Spcifications
| Modell | 8627C |
| Motortyp | Bürstenmotor |
| Leerlaufdrehzahl | 17000 r/min |
| Maximaler Luftstrom | 4760L/min 4.76m³ / min |
| Maximale Luftgeschwindigkeit | 60 m/s |
| Gewicht | 0.86Kg |
| Gehäusematerial | ABS |
| Zubehör | 1 Stk. Blasrohr 4 Stk. Blasdüsen |
Part List
Blowing Nozzle
When connecting the nozzle and the lengthening tube, pay attention to the position of holding the lengthening tube and the nozzle when connecting, as shown in the figure, First, align the gap of the nozzle with the protuberance of the lengthening tube, and then press down until the positioning point of the lengthening tube reaches the upper wall of the gap of the nozzle. Secondly, rotate the blowing nozzle clockwise until the positioning point of the extended pipe reaches the snap position of the blowing nozzle.
When connecting the blowing nozzle and the main body, pay attention to the position of holding the main body and the blowing head when connecting, as shown in the diagram.
Start & Adjust the Gear
Press the power switch, this product will start from I, and according to the need to adjust the wind speed gear.III cycle speed control.
Bent Nozzle
- Extension tube + bent nozzle in reverse direction: To blow leaves/debris/dust, etc. From high places.
- Extension tube + bent nozzle: To blow leaves/debris/dust, etc. from the ground.
- Only bent nozzle: To blow the dust and foreign objects on the working table. Minors blow away leaves, debris, dust, etc. From the ground.
INSTRUCTIONS FOR USE OF CONCENTRATING NOZZLE
- Extension tube + Concentrating nozzle: To blow foreign objects such as dust/spider web, etc., from high places.
- Extension tube + bent nozzle: To blow leaves/debris/dust, etc. from the ground.
- Only bent nozzle: To blow foreign objects from the working table. To blow foreign objects from the gap or corner of the working table.
Flat Nozzle
Extension tube + flat nozzle: To remove leaves/debris/dust from the ground. (More efficiency with a wide flat nozzle) Only flat nozzle: To blow foreign objects from the ffrom theing table. (More efficiency with a wide flat nozzle)
Inflatable Blowing
Can inflate swimming rings, small kayaks, etc.Can inflate swimming Ronix 8627C 20V Cordless Blower rings, small kayaks, etc.
Angle Adjustment
This device is designed with a rotation function (the handle and body can be optionally installed at 270 °), which can be suitable for different working environments.
When operating, hold the body with one hand and the handle with the other. Rotate the body counterclockwise or clockwise with the hand holding the body Ronix 8627C 20V Cordless Blower to adjust to the desired angle. As shown in the figure
Cleaning
The device must neither be sprayed with water nor placed Ronix 8627C 20V Cordless Blower in water. There is a risk of electric shock. Keep the ventilation slots, motor housing, and handles of the device clean. Use a damp cloth or brush to do this. Do not use cleaning agents or solvents. This could cause irreparable damage to the device.
- Keep the ventilation slots free of dust and debris to prevent the leaf blower from overheating.
- Clean the blower regularly with a soft cloth, preferably every time you use it. lf the dirt doesn’t come out, use a soft cloth dampened with soapy water.
- Never use solvents such as gasoline, alcohol, or ammonia water to clean the blower. These solvents can damage the plastic parts.
Customer Support
- Address: Lyoner Str. 36 60528 Frankfurt am Main
- Tel:+49 69 310 900 66
- Website: www.ronixtools.com
FAQs
What is the maximum airspeed and airflow of the Ronix 8627C blower?
With a maximum airspeed of roughly [specify if known] MPH and an airflow of [specify CFM], the Ronix 8627C is perfect for effectively removing dust, debris, and leaves.
How long does the battery last on a full charge?
Depending on the power setting and workload, the blower normally operates for [specify average duration, e.g., 20-30 minutes] on a full 20V battery charge.
What type of battery does the Ronix 8627C use?
Rechargeable 20V lithium-ion batteries, which are renowned for their long-lasting power and lightweight design, power the blower.
How long does it take to fully charge the battery?
Generally speaking, it takes one to two hours to fully charge the battery, though charging times vary by charger brand.
Is the blower suitable for heavy-duty yard work?
Clearing leaves, grass clippings, and other light debris from your garden or workspace is one of the light-to-medium-duty jobs that the Ronix 8627C is made for.
Can I use the blower in wet or rainy conditions?
In order to prevent electrical damage and guarantee user safety, it is not advised to run the blower in damp or rainy situations.
Does the blower have multiple speed settings?
Yes, you may change the airflow intensity of the Ronix 8627C according to your cleaning requirements, thanks to its variable speed control feature.
How should I maintain and clean the blower?
Yes, the Ronix 8627C’s variable speed control feature allows you to adjust the airflow intensity to suit your cleaning needs.