Ronix 1105 2000 W 4 Nozzles Heat Gun Instruction Manual

Ronix 1105 2000 W 4 Nozzles Heat Gun

Safety Instructions

• Keep the work area clean and well-lit. Cluttered and dark areas invite accidents.
• Keep children and bystanders away while operating a power tool.
• Power tool plugs must match the outlet. Never modify the plug in any way.
• Do not use any adapter plugs with earthed (grounded) power tools.
• Unmodified plugs and matching outlets will reduce the risk of electric shock.
• There is an increased risk of electric shock if your body is earthed or grounded.
• Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool.
• Keep the cord away from heat, oil, sharp edges, or moving parts.
• Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
• Use of a cord suitable for outdoor use reduces the risk of electric shock.
• Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
• A moment of inattention while operating power tools may result in serious personal injury.
• Avoid accidental starting. Ensure the switch is in the off position before plugging in.
• Remove any adjusting key or wrench before turning the power tool on.
• A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
• This enables better control of the power tool in unexpected situations.

Use & Care

• Do not force the power tool. Use the correct power tool for your application.
• The correct power tool will do the job better and safer at the rate at which it was designed.
• Do not use the power tool if the switch does not turn it on and off.
• Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Such preventive safety measures reduce the risk of accidentally starting the power tool.
• Power tools are dangerous in the hands of untrained users.
• If damaged, have the power tool repaired before use.
• Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean.
• Properly maintained cutting tools with cutting edges are less likely to stick and are easier to control.
• Use the power tool, accessories, and tool bits, etc..
• In accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
• Use of the power tool for operations different from the intended ones could lead to a hazardous situation.

Part List

Operation Procedures

Your heat gun has been designed for the following operations

• Removing paint and paint residues from wood, metal, and synthetics;
• Removing self-adhesive labels;
• Applying PVC labels;
• Moulding low-temperature materials, including acrylics and Perspex.
• Melting together synthetics, including materials and foils, with a PVC layer;
• Shrink tubing;
• Heating pipe attachments and bowing pipes;
• Repairing skis, surfboards, and similar sporting equipment. Instructions for use:
• Aim the mouthpiece of the machine at the workpiece.
• Heat the material for a few seconds before working with it.
• For optimum results, it is recommended to test the machine first on a small part of the workpiece.

Start Up

The position of the switch controls both the ventilation fan speed and the heat gun output power of the gun.

• To turn the tool on in low wind speed, slide the switch mark.e d To adjust the temperature, use the master temperature control knob.
• To turn the tool on in medium wind speed, slide the switch. To adjust the temperature, use the master temperature control knob.
• To turn the tool on in high wind speed, slide the switch ma. To adjust the temperature, use the master temperature control knob.
• To turn the tool off, slide the switch to the position marked.

Specifications

Environmental Instructions

• Dispose of cardboard packaging and polyethylene (PE) bags in the appropriate containers for separate collection of municipal waste according to their description.
• If there are batteries in the device, remove them and separately return them to the collection and storage facility. Return the used device to a suitable collection and storage facility, as the hazardous substances in it may pose a threat to health and the environment.
• Waste electrical equipment is waste that contains substances harmful to humans, animals, and the environment.
• These substances can lead to contamination of the soil, water, or air, and through this they can get into the human body and lead to numerous health ailments, such a vision, hearing, and speech disorders; they can also lead to kidney, liver, and heart damage, and cause skin diseases.
• Harmful substances can also have adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on the contaminated soils, and products made from them, may risk the above-mentioned health effects.
• Do not dispose of the device in the municipal waste container!!! Service: If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt directly.

Customer Support

• Address: Lyoner Str. 36 60528 Frankfurt am Main
• Tel:+49 69 310 900 66
• Website: www.ronixtools.com