Ronix 8625 20V Cordless Ratchet Wrench Instruction Manual

Ronix 8625 20V Cordless Ratchet Wrench

Safety Instructions

1. Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
2. Power tools create sparks, which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
4. Distractions can cause you to lose control.
5. Power tool plugs must match the outlet. Never modify the plug in any way.
6. Don’t use any adaptor plugs with earthed (grounded) power tools.
7. Unmodified plugs and matching outlets will reduce the risk of electric shock.
8. Don’t expose power tools to rain or wet conditions.
9. Water entering a power tool will increase the risk of electric shock.
10. Don’t abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool.
11. Keep the cord away from heat, oil, sharp edges, or moving parts.
12. Damaged or entangled cords increased the risk of electric shock.
13. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
14. Using a cord suitable for outdoor use will reduce the risk of electric shock.
15. The use of an RCD reduces the risk of electric shock.
16. Stay alert, watch what you are doing, and use common sense when operating a power tool.
17. A moment of inattention while operating power tools may result in serious personal injury.
18. Remove any adjusting key or wrench before turning the power tool on.
19. Don’t overreach. Keep proper footing and balance at all times.
20. This enables better control of the power tool in unexpected situations.
21. Dress properly. Don’t wear loose clothing or jewelry.
22. Keep your hair, clothing, and gloves away from moving parts.

Specifications

Part List

Use & Care

1. Recharge only with the charger specified by the manufacturer.  A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
2. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
3. The battery pack is not in use. Keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

1. Have your power tool serviced by a qualified repair person using only identical replacement parts.
2. This will ensure that the safety of the power tool is maintained.
3. Follow the instructions for lubricating and changing accessories.
4. Keep handles dry, clean, and free from oil and grease.

Functional Description

• Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking the function on the tool.
• Always switch off the tool before installing or Ronix 8625 20V Cordless Ratchet Wrench removing the battery cartridge.
• Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.
• Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly.

Switch Action

• Before inserting the battery cartridge into the tool, always check to see that the switch lever actuates properly and returns to the “OFF” position when released.

To start the tool, simply pull the switch lever. Tool speed Ronix 8625 20V Cordless Ratchet Wrench is increased by increasing pressure on the switch lever. Release the switch lever to stop.

Reversing Switch

This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch lever cannot be pulled.

• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.
• When not operating the tool, always set the reversing switch lever to the neutral position.

Assembly

• Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool.

Selecting the Socket

Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/ or damage to the bolt or nut.

Removing A Socket

• To install the socket, push it onto the anvil of the tool Ronix 8625 20V Cordless Ratchet Wrench until it locks into place.
• To remove the socket, simply pull it off.

Maintainance

• Always be sure that the tool is switched off and the Battery cartridge is removed before attempting to perform inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol, or the like. Discoloration, de deformation, and cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance, or adjustment should be performed by Ronix Authorized or Factory Service Centers, always using Ronix replacement parts.

Accessories

• Sockets
• Battery and charger

Storage

• The optimum storage temperature is between 5 and 30˚C.
• Store the electrical tool in its original packaging.
• Cover the electrical tool to protect it from dust and moisture.
• Store the operating manual with the electrical tool.

Customer Support

• • Address: Lyoner Str. 36 60528 Frankfurt am Main
  • Tel:+49 69 310 900 66
  • Website: www.ronixtools.com

FAQs

What types of fasteners can the Ronix 8625 cordless ratchet wrench handle?

The Ronix 8625 is made to work with a wide range of bolts and nuts that are commonly used in construction, automotive, and maintenance applications. Its 1/4-inch or 3/8-inch drive is compatible with normal socket sizes.

How long does the battery last on a full charge during typical use?

Depending on the torque level and workload, a 20V lithium-ion battery can often run continuously for 30 to 45 minutes.

Can I adjust the torque or speed settings on this ratchet wrench?

Yes, you can precisely and efficiently change the power output of the Ronix 8625 to meet your unique fastening requirements thanks to its adjustable speed and torque settings.

How do I change the direction of rotation?

You may effortlessly switch between tightening and loosening fasteners with the wrench’s forward/reverse switch, which is usually found close to the handle or trigger.

Is the Ronix 8625 suitable for professional heavy-duty use?

The equipment is designed to handle mild to medium-duty jobs for both experts and do-it-yourselfers. A pneumatic wrench with a higher torque can be more suitable for industrial applications requiring a great deal of force.

How do I maintain the cordless ratchet wrench to ensure longevity?

Maintain the battery charged, oil the wrench’s moving components as necessary, clean it frequently to get rid of dust and debris, and store it in a dry, secure location.