POWERTEC MB4102 1024Wh Power Station Instruction Manual

POWERTEC MB4102 1024Wh Power Station

Safety Instruction

• Read this user manual carefully before using the product to ensure that you completely understand the product and can correctly use it.
• After reading this user manual, keep it properly for future reference.
• Improper use of this product may cause serious injury to yourself or others, or cause product damage and property loss.
• In compliance with laws and regulations, the Company reserves the right to final interpretation of this document and all documents related to this product.
• This document is subject to changes, updates, revisions, or termination. Without prior notice. Please visit the official website to obtain the latest product information.
• No compensation for losses caused by the use of non-standard connectors

Before First Use

Prior to using your product, please read all the safety and operating instructions thoroughly. Please ensure you follow the steps below before using the product. We recommend you keep the original packaging for storing the product when not in use.

Please pay close attention to the section entitled Warnings & Safety Information. Find a safe and convenient place to keep this instruction manual for future reference. Unpack the product, but keep all packaging materials until you have made sure your new product is undamaged and in good working order. Ensure you have all accessories listed in this manual.

Box Content

Description

1. AC Output Port (16A Max)
2.  LCD Screen
3. Anderson Output Port
4. USB-C Output Port
5. USB-A Output
6. AC Output Power On/Off Switch
7. Main Power On/Off Switch
8. 10T On/Off Switch
9. 12V Car Charger Output Port
10. DC 5521 Output Port
11. DC Output Power On/Off Switch
12. Anderson input port
13. Reset switch
14. AC input port
15. Fuel Pack Connection Port

LED Screen Display

Using the Device

LCD battery capacity circle indicates the battery level. The capacity circle is divided into six sections, accounting for approximately 17%~35%~51%~68%~85%~100% of the capacity.

The number on the right side of the energy circle now displays the real-time input power. After full charging, all blue capacity segments will be illuminated and remain stable. After charging is completed, please unplug the charger.

Press and hold the power button, the product will turn on, the LCD screen will light up, and the power button indicator light will turn to a steady state; press and hold the power button for about 3 seconds or more, the LCD screen will display the word “off” and then release it, the product will shut down, and the LCD will turn off.

When the main power button is turned on, lightly press the switch button of each functional area, and the corresponding function icons on the LCD screen will light up at the same time. At this time, the functions in this area can be used normally; tap the corresponding functional area button again, and the corresponding LCD screen icons will turn off. This area function stops working.

Charging Instructions

AC Charging

Use the standard AC charging cable to charge POWERTEC MB4102 1024Wh Power Station the device. Connect as shown in the figure. When the input power on the screen shows a reading, the device starts to charge. The maximum fast charge can be 2000W, and the device can be fully charged in about 1.7 hours.

1. Long-press the DC button +IOT button and hold for 5 seconds, the screen flashes and shows the word SET, the product enters the input power switching interface, then tap the IOT button to switch, L means slow charge (1000W input), H means fast charge (2000W input);
2. After switching, hold down the POWER button for 3 to 5 seconds to confirm the setting. The screen stops flashing, and the word” SUC” will be displayed, which indicates that the setting is successful.
3. Exiting the fast charge/Slow charge switch function, please press and hold the POWER button again for 3-5 seconds.

Solar Charging

Connect the standard solar panels to the device by using the fittings “Anderson to MC4 cable” ×1 and “MC4 to 7909 cable” ×6. Up to 6 standard solar panels POWERTEC MB4102 1024Wh Power Station can be connected to the device, which takes about 2.5 hours to be fully charged.

Car Charging

Use the car charger port of the car to charge this POWERTEC MB4102 1024Wh Power Stationproduct, supporting 12V/ 8A car charging. To protect the car battery from losing power and being unable to start, it is necessary to use the car charger to charge after the car is started. At the same time, ensure that the car charger port and the cigarette lighter of the car charger input cable are in good connection. The company shall not be held responsible for any loss caused by non-compliance with the standard operating

Extended Battery Charging

This power station can connect up to 15 battery packs. Connect the power station and the battery pack with the dedicated cable. When the LCD shows the charging power, it starts to charge. The battery pack can also be charged by solar charging or a car charging port alone. The battery pack is sold separately.

Other Function

 The main function of the circuit breaker is to cut off and connect the load circuit, and cut off the fault circuit to prevent the expansion of the accident and ensure safe operation. In the case of electrical overload or abnormal operation, if a fault occurs, the circuit breaker POWERTEC MB4102 1024Wh Power Station will automatically disconnect the switch to protect electrical appliances and circuits.

1. Please turn on the AC IN switch when POWERTEC MB4102 1024Wh Power Stationcharging by mains electricity.
2. Please turn on the AC OUT switch when loading with AC output; otherwise, there will be no output at the AC output port.
3. Please turn on the AC IN and AC OUT switches at the same time if you want to use the EPS function (Load takes precedence over charging: charging+load < 2000W).

Maintainance

1. Please store the product away from water, POWERTEC MB4106 3072Wh Power Station, sources, heat sources, and metal objects.
2. In order to extend the service life of the battery, it is recommended to use or store this product in an environment of 20 °C to 30°C.
3. If long-term storage is required, please charge and discharge this product once every 3 months (first discharge to 0%, then fully charge, then discharge to 60% for long-term storage); products that have not been charged or discharged for more than 6 months will not be provided.
4. For safety reasons, do not store this product in an environment above 45°C or below -10 °C for a long time.

Specifications

Troubleshooting

Error Codes

Limited Warranty

If your product becomes defective during this period, Electus Distribution will repair, replace, or refund it if the product is faulty or not fit for the intended purpose. This warranty will not cover a modified product; misuse or abuse of the product contrary to user instructions or packaging label, change of mind, or normal wear and tear.

To claim warranty, please contact the place of purchase. You will need to show a receipt or other proof of purchase. The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in POWERTEC MB4106 3072Wh Power Station relation to the goods or services to which this warranty relates.

Customer Service

• Distributed by: Electus Distribution Pty Ltd 46 Eastern Creek Dr, Eastern Creek NSW 2766 Australia
• Ph: 1300 738 555
• Website: www.electusdistribution.com.au

FAQs

Q: What is the POWERTEC MB4102 Power Station used for?

The POWERTEC MB4102 is a portable power station made to provide dependable electricity for home backup, outdoor work, camping, and emergencies. It can power mobile devices, lights, tools, small appliances, and more thanks to its 1024Wh lithium battery capacity.

Q: What is the battery type and lifespan?

A premium LiFePO4 (Lithium Iron Phosphate) battery, renowned for its longevity, stability, and safety, powers the MB4102. Even after years of usage, it can usually withstand more than 3,000 full charge cycles and retain up to 80% of its capacity.

Q: What is the maximum output power of the MB4102?

In order to handle brief bursts from devices like pumps or small appliances when they initially start, the MB4102 offers a continuous output of 1000W and enables a peak surge of up to 2000W.

Q: How do I know when the battery is running low?

A low-battery warning will appear on the display when the power falls below 10%, and output ports may automatically turn off to safeguard the battery.

Q: How do I turn the power station on and off?

To turn the device on or off, press and hold the Power button for two seconds. For energy efficiency, each output group (AC, DC, and USB) has a separate ON/OFF control button.

Q: What does the error icon or “!” symbol on the display mean?

This could be an overvoltage, overheating, or overload fault condition. Before restarting, turn off the device, unhook any loads, and let it a few minutes to rest.

Q: Can I power sensitive electronics like laptops or CPAP machines?

Indeed. Unlike modified sine wave inverters, which could interfere with or harm sensitive items like laptops, medical equipment, and music systems, the MB4102 offers a pure sine wave AC output.