Cablematic Ceiling Mount for 32”- 75” Screens
Overview
Before installation
- Make sure you have received all parts for the Cablematic Ceiling Mount according to the components checklist.
- If any parts are missing or defective, please contact your local distributor.
- Installation of heavier products may result in instability and possible personal injury.
- The brackets must be assembled as specified in the assembly instructions.
- Incorrect installation may result in product failure and serious personal injury.
- Proper safety equipment and tools must be used.
- This product should only be installed by professionals.
- Use the supplied mounting screws and DO NOT OVERTIGHTEN THEM.
- This product contains small parts that could be a choking hazard if swallowed.
- Keep these products away from children. This product is intended for indoor use only.
- Outdoor use will not only damage the product but may also cause personal injury.
Installation
Loosen the screws as shown and adjust the screen to the desired angle.
If the display does not stop in the desired position, adjust the screws using the tools as shown.
Loosen the screws as shown and adjust the screen to the desired angle, then tighten the screws.
Cleaning & Maintainance
- Make sure that the Cablematic Ceiling Mount is switched off or secured before cleaning.
- Clean with a soft, damp cloth, without detergent, aggressive liquids, or solvents.
- Do not immerse the fan in water or any other liquid. For detailed cleaning and safety instructions on Cablematic fans, see the Cablematic EDM Oscillating Tower Fan Instruction Manual.
- If the fan is not to be used for a long period of time, protect the fan and store it or, after cleaning it, in a dry place.
Waste
In the EU, there are special waste collection systems for subsequent recycling. For more information, contact the local authority or the retailer from whom you purchased the product.
Warranty
The Cablematic Ceiling Mount is covered by all applicable legal warranties regarding material and quality. This warranty protects against any manufacturer’s defects and ensures your Cablematic Ceiling Mount meets the highest standards.
Customer Support
- Website: comercial@cablematic.com
- Ph: 2035146931
- Timings: 09:00 h to 18:00 h from Monday to Friday
FAQs
Q: What is the Cablematic Ceiling Mount used for?
This mount, which supports screens ranging from 32″ to 75″, firmly suspends flat-screen TVs or monitors from the ceiling. It offers a space-saving, robust, and adaptable installation for business, office, or residential settings.
Q: What is the maximum weight capacity of this mount?
Screens up to 50 kg (110 lbs) can be supported by the mount. Make sure your TV never goes over this limit.
Q: Is this mount compatible with all TV brands?
Indeed, VESA-standard TVs may use it. To make sure your TV is compatible, check its VESA pattern (e.g., 200×200, 400×400, etc.).
Q: How do I adjust the height of the ceiling mount?
A telescopic pole or movable extension is part of the mount. Before fastening it, you can adjust the height to suit your ceiling and preferred viewing.
Q: Can I tilt or swivel the TV once mounted?
Yes, you may angle the screen for the best viewing from various locations in the room thanks to the mount’s tilt and swivel settings.
Q: Do I need special tools for installation?
It is necessary to have basic instruments such a drill, screwdriver, level, and wrench.