Smhawk R35 Multifunctional Detector Instruction Manual

Smhawk R35 Multifunctional Detector

Introduction

Hidden cameras, sneak cameras, wireless bugs, strong magnetic transmitters, which can effectively prevent sneak shots, eavesdropping, tracking, cheating, and protect personal privacy and confidential information security.

Preparation

• bug detectors anti-spy detector
• Probe for Magnetic Field Detection
• USB Charging Cable
• User’s Manual(English)

Components and Operate Buttons

1. Probe port
2. Optical filter
3. On/off key
4. Sensitivity increase key
5. Sensitivity decreases key
6. Mode key
7. Sensitivity signal light
8. Radio Frequency Signal light
9. Magnetic field detection light
10. Chargeable indicator
11. Micro USB port
12. Infrared laser LED light

Charge the Detector

Plug the Micro USB connector of the attached data cable into the Micro USB port of the detector, and the USB port at the other end into the USB port of a running computer or USB socket to charge the detector.

• Low power:  yellow indicator light on
• Charging: The Red indicator light is always on
• Full charge: The Green indicator light is always on

Radio Frequency Signal

1. Pushtheon/offbuttonsupwards. The “beep” sound, the Radio Frequency Signal detection indicator lights up, and the device is in the power-on state.
2. The detector is set to Radio Frequency Signal detection mode by default when it is turned on.
3. Slowly moved the detector. When the detector is close to the suspicious location, the sensitivity signal light starts to flash, and the buzzer alarm sounds a “beepbeep beep” sound prompt, indicating that a wireless signal transmitter is detected nearby.

Infrared Radiation

1. Push the on /off buttons upwards. Press the mode button twice to switch to the “infrared light irradiation” mode, and the Infrared laser LED light of the detector lights up, proving that this mode has been turned on.
2. Slowly move the detector, find the red reflective point through the filter lens on the detector, and confirm it with your eyes to find the hidden camera.

Magnetic Field

1. Install the magnetic field probe, and insert the magnetic field probe into the upper probe Port of the detector.
2. Push the on /off buttons upwards. Press the mode button once to switch the detector to the magnetic field detection mode, and the magnetic field detection light is on.

Slowly move the detector. When the strong magnetic GPS Tracker is the buzzer alarm has a long “beep “sound prompt, and the LED light of the probe head will be on at the same time.

Attention

Use the “Magnetic Field ” detection mode to find weak magnetic GPS trackers that may be missed and need to be checked again using the Radio Frequency Signal” detection mode.

Application Scenario

Detectable Device

Specifications

Warranty

The whole machine and its accessories will be replaced free of charge within one month from the date of receipt of the product, according to the specific fault conditions. Please keep your Amazon order number. This guarantee is provided whenever you acquire your product from an authorized reseller. The following conditions are not covered by the warranty.

1. Fault damage caused by unauthorized disassembly, repair, modification, or abuse;
2. Natural wear and tear of product accessories (housing, charging cable, magnetic probe, packaging);
3. Failure or damage due to human factors, water ingress, damp, etc.

Customer Service

• Address: Office 1204, Mazaya Business Avenue, JLT, Dubai, UAE
• Tax ID: 456852671
• Website: https://smmhawk.com/