Marshall WILLEN Portable Bluetooth Speaker User Guide

Marshall WILLEN Portable Bluetooth Speaker

Device Layout

1. USB-C POWER INPUT
   • Charge the speaker by plugging it into a USB power source.
2. FASTENING STRAP
   • Unhook the lower-right side of the strap by stretching it gently.
3. BLUETOOTH BUTTON
   • Push and hold the Bluetooth® button until the LED turns to a slow red pulse to start pairing mode.
4. MICROPHONE
   • The microphone lets you use Willen as a speakerphone. While in a call, push the Bluetooth button to toggle between using Willen for the call and your phone.
5. BATTERY INDICATOR
   • The 5-segment battery indicator shows the battery charge with a steady light, and a rising animation indicates charging.
6. CONTROL KNOB
   1. Push and hold for 2 seconds to turn on/off.
   2. Push once to play/pause.
   3. Push right/left to skip forward/back.
   4. Hold right/left to fast forward/rewind.
   5. Hold upwards/downwards to adjust the volume.
   6. Push once to answer or end a call.
   7. Push twice to reject a call.

Bluetooth Pairing

1. Push and hold the control knob until the speaker turns on.
2. Push and hold the Bluetooth button until the LED turns to a slow red pulse.
3. Select WILLEN from your audio device’s Bluetooth list.

Factory Reset

A factory reset will return the speaker to its original settings, excluding any firmware updates. This will delete all user settings, and the speaker will need to be set up again.

1. Ensure that the speaker is on.
2. Push and hold the Bluetooth button for 7 seconds. All indicators turn off, and the speaker restarts.
3. Remove WILLEN from your audio device’s Bluetooth list before pairing again.

Cleaning

Clean your speaker regularly to keep it fresh and last longer. Unplug any leads before cleaning the speaker, and make sure everything is completely dry before plugging in any USB power source. The silicone sleeve and strap can be removed and cleaned separately. Use a disinfectant wipe or a lint-free cloth, slightly damp with 70% isopropyl alcohol or 75% ethyl alcohol, to gently clean silicon parts. Dry them with a towel before putting them back on the speaker. Carefully clean the speaker mesh and openings with a dry and soft brush or a cotton swab.

• Do not use any sharp or metal objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the speaker in any cleaning agents.

Care

Your speaker comes equipped with a high-performance lithium-ion battery,ry and the life span is affected by charging and usage. Follow the guidelines below to keep your battery in great condition for as long as possible.

• Avoid using fast chargers if possible. Fast charging causes stress on the battery and will degrade it. Avoid charging the battery when it is already full or letting it drain completely. Try keeping the charge between 30% and 80%.
• If the speaker is stored for a long time, do so with a half-charged battery and in a cool, dark, and dry place. Do not use or charge the speaker in hot and unventilated places, 45°C/113°F and above, such as in a parked car or by a window in direct sunlight.
• Avoid charging the battery at low temperatures, below 10°C/50°F, and using the speaker below 0°C/32°F. Avoid strong mechanical shocks, such as dropping the speaker on a hard surface,s as it might damage the battery.

Stack Mode

Connect two or more Willen speakers in a Stack session for a bigger sound. Play anything on the main speaker, er and all speakers in the session will play in sync. You can adjust the volume on any individual speaker to perfect the balance.

1. Main Speaker
   • Triple-press the Bluetooth button to start or end a Stack session.
   • The LED starts to blink until another speaker joins the session.
2. Additional Speaker
   • Double-press the Bluetooth button on any speaker you want to add to the session.
   • The LED starts to blink until the speaker has joined a session.
   • To remove a speaker from the session, double-press the Bluetooth button on that speaker.

Troubleshooting

Warranty

• Marshall Electronics warrants to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date.
• If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
• This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alteration,s or modifications in design or construction void this warranty.
• Due to constant efforts to improve products and product features, specifications may change without notice.

Customer Support

• Tel: (800) 800-6608
• Website: www.marshall-usa.com