Blink BSM00600U 2nd Generation Video Doorbell
Safety Instructions
- Use only accessories supplied with your device, or specifically marketed for use with your device, to power your device.
- Use of third-party accessories may impact your device’s performance.
- In limited circumstances, use of third-party accessories may void your device’s limited warranty.
- In addition, the use of incompatible third-party accessories may cause damage to your device or the third-party accessory. Read all safety instructions for any accessories before using them with your device.
- Small parts contained in your device and its accessories may present a choking hazard to small children.
- Please consult a qualified electrician in your area if you are unsure or uncomfortable
performing the installation - Always use caution when handling electrical wiring.
- Installation by a qualified electrician may be required in your area. Refer to your local laws and building codes before performing electrical work; permits and/or professional installation may be required by law.
- When mounting this device in elevated locations, use precautions to ensure that the device does not fall and harm bystanders.
- Do not install when it is raining.
Sync Module Core
- Your device is shipped with an AC adapter. Your device should only be powered using the AC adapter included with the device.
- If the adapter or cable appears damaged, discontinue use immediately.
- Install your power adapter into an easily accessible socket-outlet located near the equipment that will be plugged into or powered by the adapter.
- Do not expose your device or adapter to liquids.
- If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them in again.
- Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the device or adapter appears damaged, discontinue use immediately. Use only accessories supplied with the device to power your device.
- Install your power adapter into an easily accessible electrical socket located near the equipment that will be plugged into or powered by the adaptor.
- Don’t expose your device to steam, extreme heatt, or cold.
- Use your device in a location where temperatures remain within the device’s operating temperature range outlined in this guide. Your device may get warm during normal use.
Battery Instructions
- The lithium batteries accompanying this device cannot be recharged. Do not open, disassemble, bend, deform, puncture, or shred the battery.
- Do not modify, attempt to insert foreign objects into the batter, immerse orexpose too water or other liquids.
- Do not expose the battery to fire, explosion, high temperature, or other hazards. Fires involving lithium batteries can usually be controlled with flooding with water, except in confined spaces where a smothering agent should be used.
- If dropped and you suspect damage, take steps to prevent any ingestion or direct contact of fluids and any other materials from the battery with skin or clothes.
- If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery manufacturer’s recommendations.
- If fluid or other material from the battery comes into contact with skin or clothes, flush skin or clothes with water immediately.
- An open battery should never be exposed to water, as fire or explosion may result from exposure to water. Insert the batteries in the proper direction as indicated by positive (+) and negative (-) markings in the battery compartment.
- Always replace with non-rechargeable AA 1.5V lithium batteries (lithium metal batteries) like those provided with and specified for this product.
- Do not mix used and new batteries or batteries of different types (for example, lithium and alkaline batteries). Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with applicable laws and regulations.
Connecting To Video Doorbell
If you install the Video Doorbell where a doorbell is already in use and you connect the Video Doorbell to your home’s doorbell electrical wiring, you must turn off the existing doorbell’s power source at your home’s circuit breaker or fuse and test that the power is off BEFORE removing the existing doorbell, installing the Video Doorbell, or touching electrical Blink BSM00600U 2nd Generation Video Doorbell wires.
- More than one disconnect switch may be required to turn off the equipment before servicing.
- To test whether you have successfully de-energized your existing doorbell’s power source, press your doorbell several times to confirm that the power is off.
- If the electrical wiring in your home does not resemble any of the diagrams or instructions provided with the Video Doorbell,
- If you encounter damaged or unsafe wiring, or if you are unsure or uncomfortable in performing this installation or handling electrical wiring, please consult a qualified electrician in your area.
Protection Against Water
To reduce the risk of damage to your device, follow these instructions:
- Do not intentionally immerse your device in water or expose it to seawater, salt water, chlorinated water, or other liquids (such as beverages).
- Do not spill any food, oil, lotion, or abrasive substances on your device.
- Do not expose your device to pressurised water, hhigh-velocity water or extremely humid conditions (such as a steam room).
Specifications
Video Doorbell
- Model Number: BDM00300U
- Electrical Rating: 3x AA (LR91) 1.5 V lithium metal battery 8-24 VAC, 50/60 Hz, 40 VA
- Operating Temperature Range: -5°F to 113°F (-20°C to 45°C)
Sync Module Core
- Model number: BSM00600U
- Electrical rating: 5V ⎓ 1A
- Operating Temperature Range: 32°F to 104°F (0°C to 40°C)
FOR USA CUSTOMERS
- Supplier’s Declaration of Conformity
- Device Name: Video Doorbell
- Model: BDM00300U
FCC Compliance Statement (USA)
This Device (including related accessories like the adapter) complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) such Device may not cause harmful interference, and (2) such Device must accept any interference received, including interference that may cause undesired operation. The party responsible for FCC compliance is Blink XT2 XT Indoor & Outdoor Camera, Amazon.com Services, Inc., 410 Terry Ave North, Seattle, WA 98109 USA If you wish to contact Blink, please go to this link: www.blinkforhome.com/pages/contact-us. Device Name: Blink XT.2
Product Disposal Information
Dispose of the product in accordance with Local and National Disposal Regulations. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Recylcling
- In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle your device in accordance with your local laws and regulations.
- For information about recycling your device, go to www.amazon.com/devicesupport.
Safety and Compliance Information
- For additional safety, compliance, recycling, and other important information regarding your device, please refer to the Legal and Compliance section of the About Blink menu in the Settings in your app or on the Blink website at https://blinkforhome.com/safety-and-compliance
Customer Support
This document is the Property of Blink and should not be copied, reproduced, or ordered on he bbasismof oromanufacturing manufacturing apparatus without the written permission of Blink. For any support on installation and commissioning.
- Ph: 888-998-2546
- Timings: 12 hours from 9:00 AM to 1:00 AM
- Website: support@blinkcharging.com
FAQs
How does the Blink Video Doorbell work?
By connecting to your smartphone or tablet via Wi-Fi, the doorbell lets you see, hear, and talk to guests in real time. When someone approaches your door, motion detector alerts let you know.
What devices are compatible with the Blink app?
Both iOS and Android smartphones can use the Blink app. For best performance, make sure your device is running the most recent supported operating system.
How do I install the doorbell?
Use the mounting bracket and screws that come with the doorbell to install it close to your front door. Once installed, connect the doorbell to your Wi-Fi network by following the app’s instructions.
Does the doorbell require wiring?
The Blink BSM00600U can be easily installed without the need for existing doorbell wiring because it is battery-powered. Depending on usage, batteries can last up to two years.
How do I replace the batteries?
Take off the doorbell’s back cover and swap out the two AA lithium batteries for fresh ones. Make sure everything is oriented correctly, then shut the cover firmly.
What is the field of view and video quality?
With its wide-angle field of view and HD 1080p camera, the doorbell lets you observe visitors well and record activity close to your front door.
Does it work in low light?
Yes, you can see guests even in dim or dark environments thanks to the doorbell’s infrared night vision.
Can multiple people use the doorbell at the same time?
Yes, the Blink app allows multiple users to access the doorbell. Every user needs to be welcomed to the system and have a Blink account.
