INSIGNIA NS-CAHBT02 Bluetooth Headphone
Pakage Contents
- Bluetooth over-the-ear headphone
- Sweatproof earpads
- USB charging cable
- Quick Setup Guide
Features
- Sweatproof earpads for sports use
- Comfortable foam earpads
- Reflective headband
- Volume control
- Listen to music and talk on the phone wirelessly. Music playback: 10 hours
- Echo cancellation and noise suppression
- Voice prompts and easy pairing
- High-quality sound
Charging
- When the red indicator LED blinks three times every one minute, the battery is low. To charge the battery, plug the microUSB charging cable into your computer and into the microUSB port on your headphones. The red LED turns on to indicate that the battery is charging and turns off when fully charged.
Replacing
- Turn counter-clockwise to disassemble.
- Take it out and replace with another pair of earpads.
- Turn clockwise to assemble.
USE
Turning your stereo headphones on and off
- Place the headphones around your neck.
- Press and hold the button for three seconds. The LED blinks blue (when turned on) or red (when turned off) and the voice prompt says “Power on”, or “Power off.”
Bluetooth Basic Indication
Pairing with a cell phone or MP3 player
- With your stereo headphones turned off, press and hold for four seconds. The blue and red LEDs blink alternately.
- On your phone or MP3 player, select INSIGNIA NS-CAHBT02 from the list of discovered devices, then enter the password 0000 (four zeros) (if required) to pair your headphones. For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device’s documentation.
Note: After the headphones have been INSIGNIA NS-CAHBT02 Bluetooth Headphone successfully paired with the cell phone or MP3 player, the headphones will automatically reconnect to the phone or MP3 player.
Pairing with a computer
Note
Before you pair the headphones with INSIGNIA NS-CAHBT02 Bluetooth Headphone the computer, make sure that the computer is equipped with Bluetooth. Refer to the computer’s documentation or contact the computer manufacturer for more information. If your computer is not Bluetooth compatible, install a Bluetooth USB adapter (dongle).
- Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer.
- Double-click the Bluetooth icon in the system tray, then click Add a device (Add Wireless Device using Windows Vista).
- With the headphones turned off, press and hold for four seconds. The LED blinks blue and red alternately. Pairing mode is activated.
- Double-click the INSIGNIA NS-CAHBT02 icon on the computer or highlight the icon, then click Next. Note: If you are unable to locate the INSIGNIA NS-CAHBT02 icon, click the Search Again button.
- If required, enter 0000 (four zeros) in the Bluetooth security code field, then click Next.
- After the headphones have been paired, click Close. If you are using Windows XP, continue with steps 7 through 9.
- Select one of the Bluetooth hands-free types shown on the Add a Bluetooth Device Wizard screen, then click Next.
- Select the services shown on the wizard screen to use with your Bluetooth headphones, then click Finish.
- To connect the device, double-click the INSIGNIA NS-CAHBT02 Hands-Free Unit icon or the INSIGNIA NS-CAHBT02 Stereo Audio icon.
Pairing with a Mac computer
Note
Before you pair the headphones with the computer, make sure that the computer is Bluetooth compatible. Refer to the computer’s documentation or contact the computer manufacturer for more information. If your computer is not Bluetooth compatible, install a Bluetooth USB adapter (dongle).
- Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer.
- Click the Bluetooth status menu.
- Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens.
- Click Continue.
- Select Headset as the device type, then click Continue.
- With the headphones turned off, press and hold for four seconds. The LED blinks blue and red alternately. Pairing mode is activated.
- Select INSIGNIA NS-CAHBT02, then click Continue. The computer gathers information.
- Click Continue.
- Enter 0000 (four zeros) into the Passkey field, then click Continue.
- Click Quit to finish. Note: To use the headphones, they must be selected as the default input and output device on the computer.
- Click System Preferences, then click Sound.
- Under Input, select INSIGNIA NS-CAHBT02, then under Output, select INSIGNIA NS-CAHBT02.
For more information on using your headphones with Skype, refer to your User Guide
Specification
Troubleshooting
- Reset your BT headphone
- Plug micro USB cable for charging
Legal Notes
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) this device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RSS‐Gen & RSS‐247 Statement
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
One-Year Limited Warranty
Visit www.insigniaproducts.com for details.
Customer Service
- Call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000
- (Visit:) www.insigniaproducts.com
FAQs
Q: How do I pair the NS-CAHBT02 headphones with my device?
Ans: Press and hold the Power/Pairing button until the LED turns red and blue to turn on the headphones. Turn on Bluetooth on your device, then choose “NS-CAHBT02” from the list of devices.
Q: How long does the battery last on a full charge?
Ans: When fully charged, the headphones have a playback duration of up to 10 hours and a standby time of around 200 hours.
Q: How long does it take to fully charge the headphones?
Ans: Using the provided Micro-USB cord, charging usually takes two to three hours. When charging is finished, a red LED light will go out.
Q: Can I use the headphones while charging?
Ans: It is advised not to use the headphones while they are charging for both safety and optimal performance.
Q: Are these headphones compatible with iPhones, Androids, and laptops?
Ans: Indeed! The majority of smartphones, tablets, laptops, and even smart TVs may use the NS-CAHBT02 headphones because they are Bluetooth 4.2 compatible.
Q: Do these headphones have a built-in microphone?
Ans: Yes, they have an integrated microphone that allows you to use voice assistants or answer calls hands-free.
Q: Where are the controls located?
Ans: On the side of the earcup are buttons for Power/Pairing, Play/Pause, Volume Up/Down, and Call Answer/End.
Q: Can I pair the headphones with multiple devices at once?
Ans: One active Bluetooth connection at a time is supported by the NS-CAHBT02. Before pairing a second device, you must detach the first one.
