INSIGNIA NS-F10T7-PK 10 Inch Table Fan Manual
Pakage Contents
- 10″ table fan
- Quick Setup Guide
Safety Instruction
Read and Save These Important Instructions
- Use your fan only as described in this Quick Setup Guide.
- Do not use your fan if it works intermittently, stops working entirely, or if parts are missing or damaged.
- To reduce the risk of fire or electrical shock, DO NOT use this fan with any solid-state speed control devices (such as a dimmer switch) or expose it to water.
- To help prevent electrical shock, do not immerse your fan, plug, or power cord in water or spray it with liquids.
- Close supervision is needed when your fan is being used near children.
- Unplug your fan before moving or cleaning it, or when it is not in use.
- Never insert fingers or other objects through the grill while the fan is running.
- Make sure your fan is on a stable surface during use so it won’t overturn.
- Do not use your fan in an open window. Rain may cause an electrical hazard.
- Do not use your fan near explosive or flammable fumes.
Power cord.
- To insert the plug, hold it firmly and guide it into the outlet.
- To unplug, hold the plug and remove it from the outlet.
- Never pull or yank on the cord or fan.
- Check the cord for cuts and abrasion marks before each use.
- Do not wrap the cord tightly around the fan. This could stress the cord where it enters the fan and cause it to fray and break.
FEATURES
USING YOUR FAN
0 – Off
1 – Low
2 – Medium
3 – High
Oscillation
Push the oscillation knob down to start oscillation, pull it up to stop.
Angle adjustment
- Loosen the adjustment knob.
- Adjust the fan to the angle you want, then retighten the knob.
REPLACING THE FUSE
If your fan stops working, you may need to replace the fuse (not included).
Warning: Risk of fire. Replace the fuse only with a INSIGNIA NS-F10T7-PK 10 Inch Table Fan 5A, 125 Volt fuse. Do not force the fuse into place.
- Unplug the fan.
- Slide open the fuse access cover on top of the AC power plug.
- Remove the fuse.
- Replace the fuse, then slide the fuse access cover closed.
Caution: Do not replace the AC power plug. Discard the product if the plug is damaged.
CLEANING YOUR FAN
- Unplug the fan.
- Clean plastic parts with mild soap and a damp cloth or sponge. Thoroughly remove soap film with clear water.
- Do not splash water or other liquid into the motor.
SPECIFICATIONS
- Dimensions (D × W × H: 9.5 x 11.1 x 15 in. (24 x 28.2 x 38.2 cm)
- Volts: 120V, 60Hz.
- Speeds: 3 speeds
One-Year Limited Warranty
Visit www.insigniaproducts.com for details.
Customer Service
- Call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000
- (Visit:) www.insigniaproducts.com
FAQs
Q: Does the fan require assembly out of the box?
Ans: It requires very little assembly. Usually, the provided hardware is required to install the fan blade and front grill. Usually, no tools are required.
Q: Does the fan oscillate?
Ans: Indeed! There is an oscillation feature on the fan. Side-to-side movement can be enabled or disabled by simply turning the oscillation knob on top.
Q: What type of power source does it use?
Ans: The power cord that comes with this fan connects it to a typical 120V AC socket. It doesn’t run on USB or batteries.
Q: Can I adjust the fan’s angle?
Ans: Yes, you can precisely control the airflow by manually tilting the fan head up or down.
Q: What does the “PK” stand for in the model number?
Ans: The colour “PK” stands for pink; nevertheless, you can find various colour alternatives in the retailer’s listings.
Q: Can this fan be used outdoors?
Ans: No, only indoor use is intended for the NS-F10T7-PK. Rain or moisture exposure might harm the device and nullify the warranty.
Q:How long is the power cord?
Ans: The fan may be placed anywhere close to most outlets thanks to its standard-length power chord, which is around 4 to 5 feet long.
