INSIGNIA NS-WHP314 Wireless Stereo Headphone
Pakage Contents
Features
Connecting the Headphones
Look at the ports on your audio source device, such as a TV, stereo system, home theater, smartphone, computer, or tablet, to identify your audio OUT ports. Choose the connection option below that fits your audio source device.
Caution: Turn off or unplug all devices while you are making connections.
Pick One
RCA connection
- Connect one end of the RCA cable to the red and white INPUT ports on the docking station.
- Connect the other end to the red and white Audio Output ports on your audio source device.
3.5 mm connection
- Connect one end of the RCA cable to the red and white INPUT ports on the docking station.
- Connect the other end to the red and white connectors on the 3.5 mm-RCA adapter cable.
- Connect the 3.5 mm audio cable to the 3.5 mm headphone jack on your audio source device.
Multiple connections (Optional)
If your audio source device (a TV in the example shown) only has one audio output, but you want to connect it to both the docking station and a stereo system or home theater, do this.
- Connect one end of the RCA cable (included) to the red and white INPUT ports on the docking station.
- Connect the other end to the red and white Audio Output ports on your audio source device. Note: Use the 3.5mm-to-RCA cable adapter to connect to a headphone jack if necessary.
- Connect one end of an RCA cable (not included) to the red and white OUTPUT ports on the docking station.
- Connect the other end to the red and white Audio Input ports on your stereo system or home theater. The audio should now play through your home theater speakers.
Connecting the AC adapter to the docking station
- Connect one end of the AC adapter to the docking station and the other end to a power outlet.
- Turn the ON/OFF switch on the back of the docking station to “ON.” The PAIRINGindicator begins to blink (blue).
Charging the headphones
Important: Before using the wireless headphones for the first time, make sure that the batteries are fully charged for at least four hours. The docking station charging indicator turns solid green when the batteries are fully charged.
- Slide the OFF/ON switch on the docking station to ON.
- Place the headphones onto the docking station. Make sure that the headphone charging contacts and the docking station charging pins make contact by aligning the arrows (as shown below) when you put the headphones in the charging station.
- The docking station charging indicator turns solid red to indicate the headphones are charging.
- When the headphones are fully charged (which takes up to four hours), the docking station’s charging indicator turns solid green.
- When the headphone battery charge is low, the Power/Pairing indicator on the headphones blinks red. The Power/Pairing indicator on the headphones turns solid red 30 minutes prior to the batteries being exhausted.
Notes:
- It can take up to four hours to charge the batteries. The batteries will last up to eight hours with continuous use (depending on the headphone volume level and distance from the docking station).
- The headphones cannot be charged when the docking station is turned off.
USE
Turning on and pairing your headphones
- Slide the ON/OFF switch on the docking station to ON. The PAIRING indicator blinks (blue).
- Press the (power) button on the right earpiece to turn on the headphones. The POWER/PAIRING indicator on the headphone blinks (blue).
Notes:
- Autopairing takes 5-10 seconds.
- If the charge on the headphone batteries INSIGNIA NS-WHP314 Wireless Stereo Headphone is low, the POWER/PAIRING indicator on the headphones blinks red. When this happens, you should charge the headphones.
Tip: If the power indicators on the headphones and docking station continue to blink after 30 seconds, they are no longer paired to each other. If this happens, follow these steps:
- Make sure that the headphones and docking station are within range of each other (ideally in the same room).
- Turn off the headphones and the docking station.
- Turn on both the headphones and the docking station. The lights will initially blink, then they should turn onsteadilyy.
Listening to your headphones
- Turn on the headphones and docking station. Make sure that your docking station and headphones are wirelessly paired.
- Set the headphone volume level to the minimum.
- Put your headphones on your head. Adjust the fit until you feel comfortable.
- Turn on your audio source and begin playback. Depending on the audio source, you may need to turn up the volume on the audio source.
- Adjust the headphone volume to your normal listening level.
Caution: Continuous use at high volume may permanently damage your hearing.
Turning off your headphones
- Press and hold (more than two seconds) the (power) button on your headphones.
- Slide the ON/OFF switch on the docking station to OFF to turn off the docking station.
Sepecification
Input: AC 100-240V~ 50/60 Hz 0.2 A
One-Year Limited Warranty
Visit www.insigniaproducts.com for details.
Customer Service
- Call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000
- (Visit:) www.insigniaproducts.com
FAQs
Q: Are the NS-WHP314 headphones Bluetooth?
Ans: No, these headphones do not use Bluetooth; instead, they use 2.4 GHz radio frequency (RF) transmission through a special transmitter base. Low-latency and longer-range audio are made possible by this.
Q: What do I need to connect the transmitter to?
Ans: Any audio source that has an RCA audio output or 3.5mm headphone port (such as TVs, stereos, computers, etc.) can be connected to the transmitter. Typically, an RCA-to-3.5mm adaptor is included.
Q: Are the headphones rechargeable?
Ans: Indeed. There is an integrated rechargeable battery in the NS-WHP314 headphones. To charge them, just dock them on the transmitter base.
Q: How long does a full charge last?
Ans: Depending on usage and volume, a full charge can last up to eight hours of continuous listening.
Q: How long does it take to fully charge the headphones?
Ans: When the battery is properly positioned on the transmitter base, it takes about two to three hours to fully charge.
Q: Can I adjust the volume directly from the headphones?
Ans: Yes, you can change the sound without touching the source device thanks to the headphones’ on-ear volume controls.
