Mixx Audio xBoost Max 100 Wireless Party Speaker
LET’S START
What’s in the box?
xBOOST MAX 100 speaker
- Volume / Power on
- Charge status LED
- (illuminates RED when batter is low)
- Micro USB charger port
- Mode / Light button
- Previous track / FM tune up
- Play / Pause / FM Scan
- Skip track / FM tune down
- USB audio port for music playback
- LED display
- Micro SD card port for music playback
- Microphone volume
- Microphone echo effect
- 3.5mm AUX input
- Microphone input jack
USB Charging Cable
LET’S PLAY
First Time Pairing
Turn on your Bluetooth audio device. Turn on the speaker and press the Mode / Light button until Bluetooth mode is selected. The speaker will go into pairing mode, and the message BT will flash quickly on the LED display. Select ‘MIXX xBoost MAX’ from the audio device list to pair with the speaker. You will hear ‘Connected’ from the speaker, confirming that you are ready to play music!
Note: If your Bluetooth audio device is not able to connect to the speaker, check whether it has already connected to another device. Disconnect it and enter pairing mode by pressing and holding the Play / Pause / FM scan button.
Playing music from a USB Memory Stick
Ensure your USB Memory stick is formatted using a computer and your MP3 files are saved to the root folder on the USB stick. Turn on the speaker and insert your USB stick into the USB audio port. The input will automatically switch to USB, and music will start to play. You can control the music playback using the Play / Pause and the Track buttons &.
Playing music from a Micro SD card
Ensure your Micro SD card is formatted using a computer and your MP3 files are saved to the root folder on the USB stick. Turn on the speaker and insert your Micro SD card into the Micro SD card port. Ensure your Micro SD card is the right way – do not force it into the slot – you may need to turn it over to insert it. The input will automatically switch to TF mode, and music will start to play. You can control the music playback using the Play / Pause and the Track buttons &.
Note: if a Micro SD card AND a USB stick are both inserted at the same time, then the music on both will be accessed for playback sequentially. *USB Memory Stick and Micro SD card are not included
Play / Pause
Press the Play / Pause button to play music from a Bluetooth or a connected storage device (USB stick / Micro SD card). Press the Play / Pause button to pause music that is already playing.
Skip / Previous Track
Press the Skip Track button to skip to the next track. Short-press the Previous Track button to skip back to the beginning of the current track, and short-press again to skip to the previous track.
FM Radio
Turn on the speaker and press the Mode / Light button until FM mode is selected. When using the FM radio for the first time in a new location, press the Play / Pause / FM Scan button to scan for FM radio stations and store them in memory locations. Use the Track / FM tune buttons & to select a radio station to listen to from those stored during the radio station scan.
Using the Microphone Input
Plug the microphone (not included) directly into the Microphone input jack to sing your heart out or to Karaoke. Adjust the Microphone volume or use the Microphone echo effect to boost the sound effects.
Controlling the Lights
Press and hold the Mode / Light button to turn the lights on / off
LET’S GO WIRED
The speaker can be used with devices that have a 3.5mm audio socket. A 3.5mm audio cable provides the flexibility to convert this speaker from wireless to wired use. Convenient if there is no Bluetooth connection. Insert the 3.5mm audio cable (sold separately) into the 3.5mm AUX input and the other end into your device’s 3.5mm port, and select the AUX mode using the Mode / Light button to start listening to your music.
LET’S STAY CHARGED
When the Charge Status LED illuminates RED, it is time to charge your speaker. Using the USB cable provided, plug the speaker into a 5V USB Mixx Audio xBoost Max 100 wall charger. It is recommended to use a wall charger capable of 2A / 10W power output to ensure optimum charging rate.
Important! – Do not use a wall charger with a higher output voltage than 5V, as this may cause damage to the speaker. Once charging has completed, the Charge Status LED will turn off.
COMPATIBILITY
Suitable for most Bluetooth audio-enabled smartphones, tablets, notebooks, and laptops.
LET’S BE SAFE
You must read this section completely, especially the ‘Warning, Caution, and Safe Usage’ instructions.
For your protection, ensure the product is correctly connected using the manufacturer’s original accessories included with the product. Please keep the product out of reach of children and animals. Do not listen to loud music for a long duration of time. Mixx Audio xBoost Max 100 Adjust the volume to a comfortable level before listening. Do not use in areas where the use of hearing is required for safety. Do not drop, short circuit, disassemble, expose to intense heat, or continue to use this product if damaged.
We recommend referring all servicing to qualified persons. The operating temperature range for this product is 5º – 40º Celsius.
WARNING: This may cause excessive heat and may lead to fire damage or personal injury. This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.
LET’S RECYCLE
Take the product to a collection point designated for the recycling of electronic devices. Find out more about return and collection points through your local authority.
CONTACT US
Feedback is welcome, simply email us at support@mixx-io.com or visit mixxaudio.com for more information.
SAFE USAGE INFORMATION
Do not crush, puncture, or incinerate the speaker or USB charging cable. Only use a certified or the device manufacturer’s charging cable.
