PROTECH TH2630 Rechargeable Air Duster Instruction Manual

PROTECH TH2630 Rechargeable Air Duster

Safety Instructions

• Before using your product, please read all the safety and operating instructions thoroughly.
• Please ensure you follow the steps below before using the product.
• We recommend you keep the original packaging for storing the product when not in use.
• Please pay close attention to the section entitled Important Safety and General Instructions. For tasks that involve heat or delicate components, also refer to the PROTECH TH1069 2000W Adjustable Heat Gun User Manual for safe operation.
• Find a safe and convenient place to keep this instruction manual for future reference.
• Ensure you have all accessories listed in this manual.
• Unpack the product, but keep all packaging materials until you have made sure your new product is undamaged and in good working order.
• Plastic wrapping can be a suffocation hazard for babies and children, so ensure all packaging materials are out of their reach.

Box Content

• 1x Cordless Air Blow Duster
• 1 x Standard blower nozzle
• 1 x Brush nozzle
• 1x Type-C Charging Cable
• 1x User Manual

Product Diagram

Operating Instructions

Charging

Please use a 5V/2A Adapter or above to charge the device; a PD or QC Adaptor is suggested to get a fast charging experience. Charging: Numbers on the LED Display are flashing, and numbers are increasing as the charging goes on. Fully Charged: LED Display shows 100.

Using the Air Blow Duster

1. Choose the suitable Nozzle for the place you want to clean.
2. Long-press the Power on/off for seconds, it will start to work on Speed 1.
3. Short button second time, it will be Speed 2.
4. Short the button third times, it will turn off.
5. Torch Light: You can turn on/off the torch light whenever you need.
6.  When you feel the Power is less, or the Numbers on the LED Display are below 10, please charge the device on time.

Specifications

One-Year Limited Warranty

Should your PROTECH product prove defective within one year from the date of purchase, contact PROTECH’s Customer Support Team with the serial number and proof of purchase to make a warranty claim.

Under this warranty, PROTECH will repair or replace any parts found defective with new or remanufactured parts or exchange the defective product with a new, refurbished, or remanufactured product at our discretion.

This warranty is not transferable. After the expiration of the warranty, the cost of labor and parts will be the responsibility PROTECH CDM-600BW Freestanding Refrigerator of the original owner.

Please package the product carefully in its original packaging to avoid damage in transit. PROTECH is not responsible for damage resulting from shipper mishandling or improper packaging. Please retain the original box and packaging materials.

Warranty Does Not Cover

• Acts of God, such as fire, flood, hurricanes, earthquakes, and tornadoes.
• Improper power supply, such as a power surge, low voltage, defective household wiring, or inadequate fuses.
• Damage, accidental or otherwise, to the product while in the possession of a consumer, not caused by a defect in material or workmanship.
• Damage caused by consumer misuse, PROTECH CDM-600BW Freestanding Refrigerator tampering, lack of maintenance, or failure to follow the care and special handling provisions in the instructions.
• Damage to the finish of the case or other appearance parts caused by wear.
• Damage caused by repairs or alterations to the product by anyone other than authorized by the
  manufacturer.
• Removal, Replacement, Packaging, Freight, and Insurance costs for the warranty service.
• Products sold AS IS or from an unauthorized reseller.
• Products that have had their serial numbers removed or defaced.

Customer Support

• Email: support@whynter.com
• Website: WWW.WHYNTER.COM
• Tel:  800-443-6153

Product contents and specifications may change without notice. Copyright © 2024