Ronix 8627C 20V Cordless Leaf Blower
Safety Instructions
Read all safety warnings and instructions. Before starting up the device, it is important to have read and understood these instructions and to follow them carefully. The instructions are for your own safety and that of others. They allow you to have a long and trouble-free use of your device.
Read the instructions carefully, be familiar with the controls, and use the machine properly. Never allow children or persons unfamiliar with these instructions to use the machine. Local regulations can limit the age of the operator.
Prepation
Use ear protection and protective goggles. Wear this during the entire time the machine is in use. Do not wear loose clothing or jewelry that could be drawn into the suction opening. Keep long hair away from the vents. Always perform a visual inspection before use to ensure that bolts and other fasteners are secure, the housing is undamaged, and guards are in place.
How to Use
When connecting the nozzle and the lengthening tube, pay attention to the position of holding the lengthening tube and the nozzle when connecting, as shown in the figure, First, align the gap of the nozzle with the protuberance of the lengthening tube, and then press down until the positioning point of the lengthening tube reaches the upper wall of the gap of the nozzle. Secondly, rotate the blowing nozzle clockwise until the positioning point of the extended pipe reaches the snap position of the blowing nozzle.
When connecting the blowing nozzle and the main body, pay attention to the position of holding the main body and the blowing head when connecting, as shown in the diagram.
Start & Adjust the Gear
Press the power switch, this product will start from I, and according to the need to adjust the wind speed gear.III cycle speed control.
Bent Nozzle
- Extension tube + bent nozzle in reverse direction: To blow leaves/debris/dust, etc. From high places.
- Extension tube + bent nozzle: To blow leaves/debris/dust, etc. from the ground.
- Only bent nozzle: To blow the dust and foreign objects off the working table. Minors blow away leaves, debris, dust, etc. From the ground.
Concentrating Nozzle
- Extension tube + Concentrating nozzle: To blow foreign objects such as dust/spider web, etc., from high places.
- Extension tube + bent nozzle: To blow leaves/debris/dust, etc. from the Ronix 8627C 20V Cordless Leaf Blower ground.
- Only bent nozzle: To blow foreign objects from the working table. To blow foreign objects from the gap or corner of the working table.
Flat Nozzle
Extension tube + flat nozzle: To blow leavesdebris/dust from the ground. (More efficiency with a wide flat nozzle) Only flat nozzle: To blow foreign objects from the working table. (More efficiency with a wide flat nozzle)
Using Inflatable Nozzle
Can inflate swimming rings, small kayaks, etc.
Angle Adjustment
This device is designed with a rotation function (the handle and body can be optionally installed at 270 °), which can be suitable for different working environments.
When operating, hold the body with one hand and the handle with the other. Rotate the body counterclockwise or clockwise with the hand holding the body to adjust to the desired angle. As shown in the figure
Cleaning
The device must neither be sprayed with water nor placed in water. There is a risk of electric shock. Keep the ventilation slots, motor housing, and handles of the device clean. Use a damp cloth or brush to do this. Do not use cleaning agents or solvents. This could cause irreparable damage to the device.
- Keep the ventilation slots free of dust and debris to prevent the leaf blower from overheating.
- Clean the blower regularly with a soft cloth, preferably every time you use iIfIff the dirt doesn’t come out, use a soft cloth dampened with soapy water.
- Never use solvents such as gasoline, alcohol, or ammonia water to clean the blower. These solvents can damage the plastic parts.
Customer Support
- Address: Lyoner Str. 36 60528 Frankfurt am Main
- Tel:+49 69 310 900 66
- Website: www.ronixtools.com
FAQs
What type of battery does the Ronix 8627C use?
A 20V lithium-ion rechargeable battery powers the Ronix 8627C, providing effective cordless operation.
How long can I use the leaf blower on a full charge?
You may anticipate 20 to 30 minutes of continuous use, depending on the battery’s capacity and level of use.
How do I start the Ronix 8627C leaf blower?
Press the power button or trigger to start the motor after inserting the fully charged battery into the blower. If a speed control is provided, use it to modify the airflow.
Is the blower suitable for both wet and dry leaves?
Dry leaves and debris are the main target of the blower’s design. It may be less effective and cause more damage if applied to moist leaves.
What is the maximum airflow speed of this leaf blower?
With a top speed of about 120 mph (miles per hour), the Ronix 8627C is perfect for removing light trash, leaves, and grass clippings.
How long does it take to fully charge the battery?
A full charge typically takes one to two hours, though charging times vary by charger brand.
Can I use other Ronix 20V batteries with this leaf blower?
The majority of 20V Ronix lithium-ion batteries are compatible with the Ronix 8627C; however, always confirm compatibility before using.
Does the battery have a charge indicator?
LED charge indicators are a feature of certain Ronix batteries. To find out if your battery has this feature, check the model.