 
Meec Tools 014137 18 V Polishing Machine
Safety Instructions
Read all warnings, safety instructions and other instructions. Failure to follow all the instructions and safety instructions can result in the risk of electric shock, fire and/or serious personal injury. Save these instructions and safety instructions for future reference.
- Keep the work area clean and well-lit.
- Dark and cluttered work areas increase the risk of accidents and injuries.
- Power tools produce sparks that can ignite dust and fumes.
- Keep children and onlookers at a safe distance when using power tools.
- You can easily lose control of the tool if you are distracted.
- The plug on the power tool must match the power outlet.
- Never modify the plug in any way. Never use an adapter with earthed power tools.
- Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators.
- There is an increased risk of electric shock if your body is earthed.
- Do not expose power tools to rain or moisture.
- There is a greater risk of electric shock if water gets into a power tool.
- Keep the power cord away from heat, oil, sharp edges and moving parts.
- Damaged or tangled power cords increase the risk of electric shock
- Only use an extension cord approved for outdoor use.
- Cords intended for outdoor use reduce the risk of electric shock.
- Remove Allen keys/spanners, etc., before starting the power tool.
- Allen keys, or the like, left in a rotating part of a power tool can cause personal injury.y
- Do not overreach. Always maintain a firm footing and good balance.
- This will ensure you have better control over the tool in unexpected situations.ns
- Wear suitable clothing. Do not wear loose-fitting clothing or jewellery.
- Keep your hair, clothing and gloves away from moving parts.
- Loose-fitting clothing, jewellery and long hair can get caught in moving parts.
Description
Battery-powered polishing machine with oscillating movement pattern and a highly variable speed (2100–5000 rpm). The powerful motor is brushless and comes with overload protection. Thanks to the comfortable grip surfaces, you can work both ergonomically and safely.
- Power switch
- Display
- Button to increase speed
- Button to reduce speed
- Battery lock
- Charging status light
- Battery FIG. 1
MEEC Multi-Series
The product is a part of the Meec Multi-series – a series of power tools and garden equipment that uses the same battery and charger.
Battery Instructions
Charging the battery
The battery must be charged before it can be used with a tool. After charging for the first time, use the tool until the battery is completely flat. Repeat this charging and discharging cycle 4 to 5 times.
- Place the battery charger on a level and stable surface. Plug the charger into a 230 V power point.
- Connect the battery to the charger so that it clicks in place.
- The red LED on the charger goes on when correct contact is made.
- When the battery is fully charged, after about one hour, the red LED goes off, and only the green LED stays on.
- Pull out the plug from the power point and release the battery from the charger.
Connect/Remove the Battery
Connect the battery to the battery socket on the tool so that it clicks in place.
To remove the battery, press the lock (1) and release.
Starting & Stopping
Set the power switch (1) in position I to start. The display shows 00. Set the power switch (1) in position O to switch off.
Adjusting the Speed
Increasing the speed
Push the button to increase the speed (5) when the product is running. The set speed is shown on the display and changes in the order of 20, 25, 30, 35, 40, 45, 48 Meec Tools 014137 18 V Polishing Machine each time the button is pressed. This corresponds to the speeds 2000, 2500, 3000, 3500, 4000, 4500 and 4800 rpm.
Reducing the speed
Push the button to reduce the speed (3) when the product is running. The set speed is shown on the display and changes in the order of 20, 25, 30, 35, 40, 45, 48 each time the button is pressed. This corresponds to the speeds 2000, 2500, 3000, 3500, 4000, 4500 and 4800 rpm.
Speed settings
- A = Mode,
- B = Indication on display,
- C = Actual speed (0 = No rotation, 7 = max speed)
| A | B | C |
| 0 | 00 | Zero speed |
| 1 | 20 | 2000 ± 10% |
| 2 | 25 | 2500 ± 10% |
| 3 | 30 | 3000 ± 10% |
| 4 | 35 | 3500 ± 10% |
| 5 | 40 | 4000 ± 10% |
| 6 | 45 | 4500 ± 10% |
| 7 | 48 | 4800 ± 10% |
Polishing & Waxing
- Make sure the surface to be polished is clean and dry.
- Do not polish in direct sunlight.
- Do not polish in low temperatures or high humidity, as this can produce a mottled result.
- Always switch off the machine before lifting it from the surface being polished.
- Do not press the machine; allow the inherent weight of the machine to do the job.
- Clean the bonnets at regular intervals and/or Meec Tools 014137 18 V Polishing Machine replace them during polishing. Expect to need 2-4 bonnets per car.
- Apply five drops of polish the size of peas on the bonnet.
- Place the bonnet on the surface to be polished and start the machine at low speed.
- Spread the polish over a small area (about 30 x 30 cm).
- Increase the speed and move the polisher slowly (about 4 cm/sec) backwards and forwards over the surface a few times.
Technical Data
Polishing machine
- Voltage: 18 V DC
- Speed: 2100 – 5000 rpm
- Disc diameter: 125 mm
- Oscillating: Yes
- Stroke rate: 15 mm
- Sound pressure level, LpA: 75 dB(A), K=3 dB
- Sound power level, LwA: 86 dB(A), K=3 dB
- Vibration level, Ah: 4.56 m/s², K=1.5 m/s²
Battery charger
- Input voltage: 230 V ~ 50 Hz
- Power output: 40 W
- Output voltage: 14.4–18 VDC
- Output current: 2.4 A
- Safety class: II
- Protection rating: IPX0
- Battery type: Lithium
- Cells (number and voltage): 5 x 3.6 VDC
Error Codes
| Error message | Symptom/possible cause | Proposed action |
| E1 | Overcurrent protection: Power consumption too high (over 50 A ± 4 A > 500 ms). The product is defective. | Switch off the product. Start the product again. Contact the retailer if the product still does not work properly. |
| E3 | The product does not start. Some other reason prevents the product from starting. The product is defective. | Switch off the product. Start the product again. Contact the retailer if the product still does not work properly. |
| E4 | Overload protection. Overload. The product is defective. | Switch off the product. Start the product again. Contact the retailer if the product still does not work properly. |
| E5 | Overheating protection. If the product is used continuously for a long time, it can overheat, whereby the overheating protection trips and switches off the product. | Switch off the product and allow it to cool for at least 30 minutes before starting it again. |
| E6 | Undervoltage protection: The voltage is too low
(less than 14 ± 0.5 V). |
Charge the battery, or replace it with a fully charged battery. |
| E7 | Hardware fault | Switch off the product. Start the product again. Contact the retailer if the product still does not work properly. |
| E8 | Motor failure | Switch off the product. Start the product again. Contact the retailer if the product still does not work properly. |
| E9 | Surge protection. The voltage is more than 30 V. | Check that the battery voltage is < 21 V. Use the specified type of batteries. |
Care for the Environment
Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station, e.g. the local authority’s recycling station.
Limited Warranty
Normal Wear: Many power tools need periodic parts replacement and service to achieve the best performance. This warranty does not cover repair when normal use has exhausted the life of a part, including, but not limited to, chucks, brushes, cords, saw shoes, blade clamps, o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and bumper cover.
Customer Support
- Website:Â https://www.jula.se/varumarken/meec-tools/
- Tel:Â +39-0645652462