VacMaster EasyClean Rapid Carpet Cleaner
Safety Instructions
- Do not leave the appliance when plugged in.
- Unplug from the outlet when not in use and before VacMaster EasyClean Rapid Carpet Cleaner servicing.
- Not for space heating purposes.
- Make sure the household voltage is the same as that indicated on the rating label of the unit.
- Always switch off, unplug from the socket after use or before cleaning the appliance or any maintenance task.
- Do not unplug by pulling and jerking the cord with force.
- Do not handle the plug or the appliance with wet hands.
- Do not use the appliance in any outdoor area. Commercial use will void the warranty.
- Do not step on or wrap the cord around arms or legs when using the appliance.
- Do not pull, lift, or carry the appliance by its supply cord.
- In order to avoid damage to the cord, do not pull the cord around sharp corners and edges.
- Keep the appliance away from the ovens and stoves, etc.
Installation
- Reset the thermal protector: Should this machine overheat, the thermal protector will automatically activate.
- When the thermal protector activates, the nozzle will stop spraying.
- To reset the thermal protector, turn the carpet cleaner off and unplug the power cord from the power supply to allow the carpet cleaner to cool for approximately 30 minutes.
- Turn on the carpet cleaner and prime the pump by lowering the hose down to the floor and laying it flat.
- Press the trigger for up to 1 minute.
Troubleshooting
Should you have any problem(s) with your steam mop, review the table below for solutions to minor performance issues.
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
| The steam mop will not power on (the indicator light will not illuminate). | The plug is not plugged into the wall outlet. | Be sure the power cord plug is fully plugged into the outlet. |
| Defective power cord. | Check the power cord condition; if there is any damage, contact customer service. | |
| Blown fuse or breaker. | Replace the fuse or reset the breaker in the home. | |
| The internal fuse is blown. | Contact with customer service. | |
| The indicator light illuminates red. | The water tank may be empty. | Fill up the water tank with water. |
| Reduced steam or no steam. | The water tank may be empty. | Fill up the water tank with water. |
| The heat-up time is not finished. | Wait for approx. 25 seconds after being plugged in. | |
| There is no power to the steam mop. | Make sure the steam mop is plugged into a good wall outlet. | |
Customer Support
- Website: www.vacmasterfresh.com/product-registration/
- Visit: vacmasterfresh.com/contact-us/
- Tel: 1-866-384-8432.
FAQs
What types of surfaces can the VacMaster EasyClean clean?
It’s perfect for getting rid of spills, pet stains, and entrenched grime from floors and furniture covered in fabric.
Does the VacMaster EasyClean heat the water?
Fill the clean water tank with warm tap water (no more than 60°C/140°F) for optimal results.
How does the EasyClean Rapid Carpet Cleaner work?
In order to leave carpets cleaner and drier more quickly, it sprays a mixture of water and cleaning solution, scrubs the carpet with a motorised brush, and then drains the used water into a different tank.
What type of cleaning solution should I use?
Steer clear of high-foaming detergents, vinegar, and bleach since these can harm the device or void the warranty.
How long does it take for carpets to dry after cleaning?
The drying time usually lasts between two and four hours, depending on the carpet’s thickness, ventilation, and humidity. Increase ventilation with fans or open windows to speed up drying.
How do I prevent streaks or overly wet carpets?
Spread the cleaner evenly and carefully over the carpet. To get rid of as much moisture as possible, avoid over-overlapping and employ the suction-only pass after spraying.
Can I use this cleaner on delicate rugs or hardwood floors?
Steer clear of laminate, unsealed wood floors, fragile area rugs, and surfaces that could distort from dampness.
How often should I clean the brush and nozzle?
Rinse the brush and nozzle after each use to get rid of debris, pet hair, and lint for optimal results. Weekly or after frequent use, give them a thorough cleaning.