Adler AD 9622 Lint Remover Recharge Battery User Guide

Adler AD 9622 Lint Remover Recharge Battery User Guide

Safety Instructions

1. Before using the device, read the instruction manual and follow the instructions contained therein.
2. The device is for domestic use only.
3. Do not use it for other purposes incompatible with its intended use.
4. Connect the device only to a USB port 5V / 2A.
5. Take special care when using the device when children are around.
6. Do not allow children to play with the device.
7. Do not allow children or anyone unfamiliar with the device to use it.
8. Do not immerse the cable, plug, or the entire device in water or other liquid.
9. Do not use the device if it has been dropped or damaged in any other way or is not working properly.
10. Return a damaged device to a competent service center for inspection or repair.
11. Only authorized service centers may make any repairs. Improper repair may cause damage to the user.
12. Do not use the device near flammable materials.
13. Do not leave the device turned on unattended.
14. Be careful when opening the tank so as not to damage it.
15. Do not bend or deform the perforated blade cover.
16. Take special care when pulling out the blades.
17. Wipe the housing of the device with a dry cloth.
18. Empty the lint container when it is 3/4 full.
19. Straighten the surface of the fabric before use.
20. Do not dent the machine into the fabric it may damage the fabric.
21. The device has a protective lock. It will not work if the blade cover is not reinstalled.
22. Do not use the device near water, e.g., in the shower, in the bathtub, or over a sink with water.
23. Do not grip the device with wet hands.
24. Turn off the device every time you put it away.

Description

1. Battery charge level indicator
2. Battery charging indicator
3. Operating speed indicator
4. ON/OFF button to change the operating speed/power supply
5. USB charging socket, type C
6. Blade cover
7. Blades
8. Rotating shaft
9. Tight knots and crumples receptacle
10. Housing
11. Cleaning brush
12. USB charging cable

Battery Charging

To start charging, plug the charging cable (12) into the charging socket (5), and then connect it to the power supply.

When connected to the power supply, the battery charging indicator (2) will light up, and the battery charge level indicator (1) will display the current battery charge level.

When the battery is fully charged, the charge level indicator will show 100%. The time to fully charge the battery is about 2-3 hours. When fully charged, the operating time is about 120 minutes, depending on the selected speed. The device should not be used while charging.

Use

1. Place the garment (fabric) on a flat surface, and smooth out the wrinkles.
2. Turn on the device by pressing the button (4). The device has three operating speeds. To increase the speed, press the button (4) again. Available speeds: 6500, 7500, 8500 revolutions per minute.
3. Move the device back and forth over the material.
4. Difficult-to-remove knots can be removed by moving them across and then lengthwise (“checkered”) on one small piece of clothing.
5. Thin garments can be pressed by placing them on a flat, stiff cardboard.
6. For fabrics with a pattern, move the device according to the direction of the pattern.

Cleaning

1. Turn off the machine by pressing the button (4).
2. Unscrew the blade protection cover (6) counterclockwise.
3. Remove the blades (7) by pulling them upwards (Caution! The blades are very sharp!).
4. Clean the blade cover (6), blades (7), and rotary shaft (8) with the included brush (11).
5. Empty the hopper for knots and crudes (9).
6. After cleaning, assemble all disassembled parts.

Technical Specifications

• Rated power: 10W
• Maximum power: 18W
• Power supply: USB 5V / 2A

Environmental Instructions

• Dispose of cardboard packaging and Adler AD 9622 Lint Remover Recharge Battery polyethylene (PE) bags in the appropriate containers for separate collection of municipal waste according to their description.
• If there are batteries in the device, remove them and separately return them to the collection and storage facility. Return the used device to a suitable collection and storage facility, as the hazardous substances in it may pose a threat to health and the environment.
• Waste electrical equipment is waste that contains substances harmful to humans, animals, and the environment.
• These substances can lead to contamination of the soil, water, or air, and through this they can get into the human body and lead to numerous health ailments, such a vision, hearing, and speech disorders; they can also lead to kidney, liver, and heart damage, and cause skin diseases.
• Harmful substances can also have adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on the contaminated soils, and products made from them, may risk the above-mentioned health effects.
• Do not dispose of the device in the municipal waste container!!! Service: If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt directly.

Customer Service

• Website:  service@adlerglobal.com. 
• Ph: 0800 9753 003
• Timings:  Mo – Fr, 8:30 am – 5:00 pm

FAQs

What types of fabrics can the Adler AD 9622 lint remover be used on?

The majority of textiles, including cashmere, wool, cotton, polyester, and mixes, can be safely treated with it. To avoid damaging delicate textiles like silk or lace, do not use it on them.

Is the AD 9622 cordless?

Yes, it is a cordless lint remover that can be used anywhere and is powered by a rechargeable battery.

How long does it take to fully charge the lint remover?

Using the included USB charging cord, a full charge usually takes three to four hours.

How long does the battery last on a full charge?

With a full battery, the device may be used continuously for about 60 minutes.

Can I use the lint remover while it’s charging?

It is advised to use the gadget only when fully charged and not while charging for safety and best battery health.

How do I turn the lint remover on and off?

To start the device, slide the power switch on the handle to the ON position; to stop it, slide it back to the OFF position.

What should I do if the lint remover isn’t picking up fuzz effectively?

Make sure the cloth is taut and flat. Additionally, make sure the blades are clear of debris and clean, or that the lint chamber is full.

How do I empty the lint collection compartment?

Carefully remove and discard the accumulated lint by pressing the release button or opening the compartment door.