Harman Kardon ONYX STUDIO 9 Bluetooth Speaker User Manual

Harman Kardon ONYX STUDIO 9 Bluetooth Speaker

The Harman Kardon ONYX STUDIO 9 Bluetooth Speaker is easy to use. This guide shows how to pair it, play music, charge it, and use all the key features. Follow each step to get the best sound.

What’s in the Box

• Power cord quantity
• Plug

Bluetooth Pairing

Music Streaming

To reboot, hold for more than 10 seconds.

Multi-Point Connection

Maximum 2 devices

Stereo Boost Pairing

Stereo Boost Control

The stereo group will be interrupted when entering a multi-speaker connection.

Multi-Speaker Connection

Music Playback

To play music through the audio cable, disconnect Bluetooth.

Charging

If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

Powerbank

Technical Specification

• Transducers: Woofer 1 x 120 mm, Tweeter 3 x 20 mm
• Rated output power: 50 W RMS
• Power supply: 100 – 240 Vac, 50 Hz / 60 Hz
• Frequency response: 50 Hz – 20 kHz (-6 dB)
• Signal-to-noise ratio: > 80 dB
• Battery type: Li-ion 17.15 Wh (equivalent to 3.63 V / 4722 mAh)
• Battery charge time: 4 hours
• Music play time: Up to 8 hours (dependent on volume level and audio content)
• Bluetooth® version: 5.3
• Bluetooth® profile: A2DP 1.4, AVRCP 1.6
• Bluetooth® transmitter frequency range: 2400 MHz – 2483.5 MHz
• Bluetooth® transmitter power: ≤ 16 dBm (EIRP)
• Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
• USB specification: Audio playback is for the US version only.

For other versions, USB is for Service only.

• USB port: Type C
• USB rating: 5V/2.1A (maximum)
• Supporting file formats: mp3
• Dimensions (W x H x D): 289.2 x 287.5 x 130 mm / 11.39″ x 11.32″ x 5.12″
• Weight: 3.36 kg / 7.42 lbs

Information on Power Consumption

This equipment complies with European Commission Regulation (EU) 2023/826.

• Off: N/A
• Standby: < 0.5 W
• Networked standby for the speaker: < 2.0 W

The period of time after which the power management function switches the equipment automatically into

During self-tuning, environmental sound will be recorded. Press and together for 5 seconds, then press to play the recorded audio (for US version only).

FCC

The SAR limit of FCC and lSED is 1g 1.6 W/kg. The device has also been tested against this SAR limit according to this standard. The SAR limit of CE and UKCA is 10g 2.0 W/kg. The device has also been tested against this SAR limit according to this standard. The highest SAR value reported during product certification for body use is 10g 0.02 W/kg. The device was tested for typical bodily operations where the product was kept with 0mm distance away from the body.

One App

With the Harman Kardon One app on your Android™ or iOS device, you can set up a multi-channel sound system by wirelessly pairing your Enchant Sub with: Enchant 900 / 1100 (soundbar, sold separately): to enhance the bass performance. You can also check the Harman Kardon ONYX Wireless Speaker System manual for more setup tips and features.

• Enchant 900 / 1100 (soundbar, sold separately): to enhance the bass performance.
• For more information, see “5 SETUP”.

Customer Service

• Address: Open Source, Gregor Krapf-Gunther, Parking 3, 85748 Garching bei Munchen, Germany.
• Website: www.harmankardon.com.
• Tel: (800) 422-8027
• Timings: Mon – Fri – 9:00 am 11:00 pm (ET) Sat – Sun – 9:00 am 5:00 pm

© 2013 HARMAN International Industries, Incorporated. All rights reserved.