Sony NXL-IP55 Ip Live Production Unit Instruction Guide

Sony NXL-IP55 IP Live Production Unit

Safety Introduction

When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug. When installing, the installation space must be secured in consideration of the ventilation and service operation.

•  Do not block the ventilation slots at the left side and right side panels, anthe d vents of the fans.
•  Leave a space around the unit for ventilation.
• Leave more than 40 cm of space in the rear of the unit to secure the operation area.
• The unit is installed on the desk or the like, leave at least 4 cm of space on the left and right sides.
• Leaving 40 cm or more of space above the unit is recommended for service operation.

Operation

OS: Microsoft Windows 7, Windows 8 Web browser: Firefox 21, Internet Explorer 1.0. A portion of the web menu layout may be disarranged if you use an operating system or Web browser other than the above. The unit’s factory default IP address is 192.168.0.3. You can verify a changed IP address in the characters embedded in the monitor output.

1. Connect the CONTROL connector on the rear of the unit to a computer using a LAN cable (either straight or cross).
2. Open a web browser on the computer, and enter “http://192.168.0.3” (or an amended IP address) in the address field. The web menu appears.
3. Select a language in [Language Select] under [4. Operation Manual] in the [Operator] page.
4. Click the [View] button in [View Operation Manual (PDF)]. The Operation Manual appears in PDF format.

Specifications

• Power supply: DC 19.5 V
• Current consumption 2.2 A Inrush current
• Operating temperature: 5 °C to 40 °C (41 °F to 104 °F)
• Storage temperature: 20 °C to +60 °C (–4 °F to +140 °F)
• Mass: 2.5 kg (5 lb. 8.2 oz.)
• Dimensions: 214 × 42.2 × 314.2 mm (8 1 /2 × 1 11/16 × 12 3 /8 in.) (W × H × D)
• Input: connectors
• REF; BNC type (1) HD: SMPTE 274M, 3-value sync 0.6 Vp-p, 75 Ω SD: Sync (NTSC: 0.286 Vp-p, 75 Ω /
• PAL: 0.3 Vp-p, 75 Ω)
• HD SDI I: BNC type (3) SMPTE 292M/327M, 1.485 Gbps/1.4835 Gbps
• DC IN: 19.5 V

Disposal

For the Customers in Europe

The recycling of materials will help to conserve natural resources. For more detailed information about the recycling of this product, please contact your local Civic  Office, your household waste disposal service, or the shop where you purchased the product.

Notice for the customers in the countries applying EU Directives > Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da Vincilaan 7-D1, 1935

For the Customers ithe n the Republic of India

Reduction in the Use of Hazardous Substances in Electrical & Electronic Equipment. This product and its components, consumables, parts, or spares comply with the hazardous substances restriction of India’s E-Waste (Management) Rules. The maximum allowable concentrations of the restricted substances are 0.1% by weight in homogenous materials for Lead, Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ethers (PBDE), and 0.01% by weight in homogenous materials for Cadmium, except for the exemptions specified in Schedule II of the aforesaid Rules.

Customer Service

• Website: https://www.sony.com/
• Ph: 800-326-9551