Cleer ARC 3 Pro Music Open Ear Headphones User Guide

Cleer ARC 3 Pro Music Open Ear Headphones

Overview

First-use

• For the first use, tap and hold the MFB for 2 seconds to power on.
• When unboxing for the first time, please remove the protective film.

D & Dolby Atmos

This function is deactivated by default. You can quickly activate or deactivate the function according to your needs in the following ways:

• A. Operate on the home page of the Cleer+ App
• B.  Operate on the Dolby page of the charging case touch screen.
• C.  Tap and hold the touch area of either earbud for more than 2 seconds.

Voice Control

When using the earbuds, simply say the following statements to control the earbuds.

• Previous song/Next song
• Play music/Pause music
• Volume up/Volume down
• Pick up/Hang up
• Take a photo

Default to be closed, activated in the Cleer+ App.

Active Noise Control

This function is disabled by default upon leaving the factory. You can enable or disable it as needed using the following methods:

Method 1

• Long-press the left earphone touch area for 2 seconds (you can re-customize the touch function in the Cleer+ App to suit your preferences).

Method 2

• Click on “Noise Control” on the homepage “Functions” interface of the Cleer+ App.

Volume Sync Setting

• • iPhone and earbuds volume are automatically synchronized, namely, the volume displayed on the iPhone is the volume of the whole system of the earbuds.
  • Android phones (not all) are not synchronized with the earbuds volume, so users need to set up volume synchronization on their Android phones. Ways of setting are different based on phone brand; you need to consult with the phone manufacturers to confirm.

• HarmonyOS setting reference: Settings → Bluetooth → Setting Icon of Earbuds → Bluetooth device volume is synchronized with the phone.
• For Huawei EMUI system/VIVO/OPPO phones, find Developer Options in Settings, and then find Bluetooth Absolute Volume (the function is deactivated by default). Bluetooth earbuds will be synchronized with the phone volume after the function is activated.
• Generally, for other Android phones, it is most likely also to find the Absolute Volume function in Developer Options.

Head Motion Control

Default to be closed, activated in the Cleer+ App.

Earbuds control

You can customize the touch on the Cleer+ App by yourself.

Earbuds control

This function is not available when using a single earbud.

LED behavior

Sterilization with UV-C light

The data comes from authorized third-party testing institutions. All the data is obtained at the laboratory and is for reference only. The sterilization effectively kills 99.9% or more harmful bacteria such as Staphylococcus aureus, Escherichia coli, Candida albicans, Salmonella, Klebsiella pneumoniae, and Pseudomonas aeruginosa at the corresponding area on the earbuds.

Charging

• The CT ARC 3 charging case to a power source or placed the charging case on a wireless charging pad.
• A 5-minute charge of earbuds will offer 1.5 hours of play time. Up to 10 hours of total playtime with fully charged earbuds. With an additional 40 hours with the charging case.

Earbud peering mode

When an earbud is lost, put the replacement new earbud and the old earbud into the charging case, slide to the left or right on the operation interface to click［Auxiliary］ ［Earbuds Sync］to complete pairing.

Restore factory settings

• Using the Cleer+ App, click［Settings］ ［Function Management］ ［Clear Paired Devices］ successively, to complete the operation.
• Using the charging case, put both earbuds into the charging case, slide to the left or right on the operation interface to click［Auxiliary］ →［Reset Earbud］to complete the operation.

Settings for the charging case

Put both earbuds back into the charging case, close the charging case, slide to the left or right on the operation interface to find［Reset Charging Case］, and tap Restore Factory Settings to complete the operation.

Fitting

Correct fitting Position

Rotate the earhook and slide the earhook behind your ear until it rests gently over the top of your ears. Adjust the hinge to find the position that works best for you.

Power on

Power On

Bluetooth Pairing

Put both earbuds back in the charging case, close the case, slide to the left or right on the touch screen to the pairing page, select “Pairing Mode”, and then take out the earbuds. After that, the earbuds will enter Bluetooth Pairing Mode and can be searched by other devices.

Specifications

• Driver: 16.2mm neodymium dynamic driver
• Audio CODEC support: aptXTM Lossless，aptXTM Adaptive， L DAC， AAC， S BC
• Frequency response range: 50-40kHz
• Connections: USB-C cable for charging， Charging current 5V/2A
• UVC: UVC 270±10nm
• Battery charging (earbuds):  A 5-minute charge will give 1 hour of playtime, less than 2.5 hours
• Playback time: Up to 10 hours*，  in total 40 hours with charging case
• Support: Bluetooth 5.4，A2DP v1.3.2，AVRCP v1.6.2，HFP v1.9
• Weight: 12g (per earbud)，130g (earbuds and case)

Maintenance

1. Then, wipe them with a piece of dry, hairless, soft cloth and dry them in the air.
2. Do not use any chemicals or organic solvents (such as soapy water, hand sanitizer, or other acid-base solvents) to clean the earbuds, or the residual may cause skin irritation.
3. Please regularly use a soft, hairless cloth to wipe the earbuds.
4. Do not use paper towels or cloth containing wood fibers. Do not use dirty or abrasive cloth.
5. When you put the earbuds back into the charging case to charge.
6. Please make sure that the earbuds are dry and clean.
7. When charging the earbuds fails, please check whether the charging contact point of the charging case and the earbuds are dirty. If yes, please wipe them clean with a piece of cloth or cotton, then try again.

Troubleshooting

1. Earbuds don’t charge in the charging case: first, make sure the charging case is charged.
2. Then check the charging contacts of the earbuds and the charging case respectively, and use a soft cloth to clean up the dirt on the contacts, and then try again.
3. Touch screen of charging case does not respond: open the charging case, tap and hold the charging case reset button for 8 seconds, and the charging case will be reset.
4. Earbuds are hot when charging: when charging earbuds in a charging case, especially the earbuds with 0% battery level, it is normal for the earbuds to be slightly hot during fast charging.
5. After taking the earbuds out of the charging case, the temperature of the earbuds will return to normal. But when the earbuds become extremely hot, take them out of the charging case immediately and contact the after-sales service for further processing.

Warranty

Labor: For a period of (1) year from the original date of purchase of the product (“Labor Warranty”), Cleer Limited will, at its option, repair or replace with a new or refurbished product, the product determined to be defective. If Cleer Limited elects to replace the product after this Labor Warranty has expired but while the parts warranty is still in effect, it will do so for the applicable labor charge.

Parts: For a period of (1) year from the original date of purchase of the product (“Parts Warranty”), Cleer Limited will supply new or refurbished replacement parts in exchange for parts determined to be defective.

Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement, part, or replacement product for the remainder of the original Limited Warranty period or for (90) days, whichever is longer. Any product replaced under this.

Customer Service

• Website: www.cleeraudio.com
• Ph: 1 888 672 5337 (67 CLEER)