Cleer GOAL Sport True Wireless Earbuds Instruction Guide

Cleer GOAL Sport True Wireless Earbuds

Box Contents 

Overview

Quick Start 

1. GOAL will power ON automatically when removed from the charging case. * GOAL will go into pairing mode automatically when powered ON for the first time (if you need to manually go into pairing mode, please follow the steps on page 4).  GOAL will automatically connect to the last connected device if it is in range and available for pairing.
2. Select “Cleer GOAL” on the Bluetooth device list to pair the earbuds.
3. Enjoy your music with GOAL.

Bluetooth Pairing

Pairing Mode

1. Remove both GOAL earbuds from the charging case.
2. Tap the touch pad 5 times on either earbud, and the LED will blink in red and white.
3. Select your “Cleer GOAL” on the Bluetooth device list to pair the earbuds.
4. GOAL is now paired.

To clear the pairing record of your GOAL:

1. Remove both earbuds from the charging case
2. Put both earbuds into pairing mode
3. Press and hold the touch pad until the LEDs on the earbuds flash red 3 times
4. The pairing record is now clear, and the device will enter pairing mode

Twist Fit

1. Remove GOAL from the charging case. Insert them into your ears with the silicone skirts facing backwards, until they sit comfortably in your ears.
2. Twist the GOAL earbuds to fit your ears and make sure the silicone skirts fit securely in your ear.
3. If the silicone skirts do not fit comfortably in your ears, try a different size.
4. The skirts that are already attached are medium-sized. size

Freebit Silicone Skirt

The Freebit silicone skirts are designed to keep the GOAL earbuds in your ears comfortably. If you need to change the silicone skirts to a different size (small, large, or no skirt), follow these steps to attach the skirts to the earbuds.

1. Place the circular opening of the skirt through the driver housing.
2. Snap the sides of the skirt into the groove in the main housing.
3. Adjust the skirt so that the charging plates and microphone openings are not covered

Earbuds Control (Playback and call)

 LED Behavior

Charging

Battery level over 20% Battery level below 20%  * The LED will turn off after 3 seconds if the case is not connected to a power source .rce

Charging Battery full

Specifications 

• Driver:  13.4mm neodymium dynamic driver
  
• Audio CODEC support: SBC, aptX, MP3
  
• Frequency response range: 20 – 20,000Hz
  
• Connections: USB-C cable for case charging
  
• Battery charging (eearbuds: A 5-minute charge will give 1 hour of playtime
  
• Playback time: Up to 6 hours, up to an additional 14 hours with the charging case
  
• Support: BT 5.0, A2DP v1.3, AVRCP v1.6, HFP v1.7
  
• Protection from water: IPX4 water-resistant and sweatproof (for earbuds only) 
  
• Weight: 6.6g (per earbud), 60g (both earbuds and case

Warranty

Labor: For a period of (1) year from the original date of purchase of the product (“Labor Warranty”), Cleer Limited will, at its option, repair or replace with a new or refurbished product, the product determined to be defective. If Cleer Limited elects to replace the product after this Labor Warranty has expired but while the parts warranty is still in effect, it will do so for the applicable labor charge.

Parts: For a period of (1) year from the original date of purchase of the product (“Parts Warranty”), Cleer Limited will supply new or refurbished replacement parts in exchange for parts determined to be defective.

Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement, part, or replacement product for the remainder of the original Limited Warranty period or for (90) days, whichever is longer. Any product replaced under this.

Customer Service

• Website: www.cleeraudio.com
• Ph: 1 888 672 5337 (67 CLEER)