Cleer ARC Ear Free True Wireless Headphone User Guide

Cleer ARC Ear Free True Wireless Headphones

Box Contents

Charging Case with charging cable inside

Quick start guide / User manual / Warranty card (This document)

Overview

Fitting

Rotate the earhook hinge and slide the earhook behind your ear until it rests gently over the top of your ear.

Correct wearing position

Quick Start Guide

• Take the ARC from the charging case,
  Press the power button on the left and right earbuds to power on, respectively.
  • ARC will go into pairing mode automatically when powered ON for the first time (if you need to manually go into pairing mode, please follow the steps on page ).
  • ARC will automatically connect to the last connected device if it is in range and available for pairing.

   

• 2. Select “Cleer ARC” on the Bluetooth device list to pair the earbuds.

• Enjoy your music with ARC.

The Cleer+ app gives you more customised control over your ARC. Download the Cleer+ app from the App Store (for iOS devices) or Google Play (for Android devices). With the Cleer+ app, you can:

• Customise the equaliser setting of your ARC.
• Change the auto-power off time period to your preference.
• Change the Bluetooth name of your ARC.
• Receive software updates when new features and improvements are available.
• Check the playback time and battery level of your ARC.
• Sound settings are saved to your ARC, so you can enjoy them with any playback device connected to your ARC.

Bluetooth Pairing

Pairing Mode

• Remove both ARC earbuds from the charging case.
• 2. Press the power button on the left and right earbuds to power on, respectively.

• Long-press either left or right earbud until the LED of both earbuds blink in red and white.

• Select your “Cleer ARC” on the Bluetooth device list to pair the earbuds.
• ARC will power off automatically when put back in the charging case. If you need to manually power off, press once on either the left or right earbud.

Earbuds Control (Playback and call)

LED Behavior

Charging

Connect the ARC charging case to a power source with the USB-A cable. A 5-minute charge of the earbuds will give 1 hour of playtime. Up to 7 hours of total playtime with fully charged earbuds.

Restore Factory Settings

Manually go into pairing mode, then tap and hold on the touchpad of either earbud.

Specifications

• Driver: 16.2mm neodymium dynamic driver
• Audio CODEC support: SBC, aptX
• Frequency response range:20 – 20,000Hz
• Connections: USB-A cable for charging, Charging current 5V/500mA
• Battery charging (earbuds): A 10-minute charge will give 1 hour of playtime
• Playback time: Up to 7 hours
• Support: BT 5.0, A2DP v1.3, AVRCP v1.6, HFP v1.7
• Weight: 14.5g (per earbud), 96.5g (both earbuds  and case)

Warranty

Labor: For a period of (1) year from the original date of purchase of the product (“Labor Warranty”), Cleer Limited will, at its option, repair or replace with a new or refurbished product, the product determined to be defective. If Cleer Limited elects to replace the product after this Labor Warranty has expired but while the parts warranty is still in effect, it will do so for the applicable labor charge.

Parts: For a period of (1) year from the original date of purchase of the product (“Parts Warranty”), Cleer Limited will supply new or refurbished replacement parts in exchange for parts determined to be defective.

Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement, part, or replacement product for the remainder of the original Limited Warranty period or for (90) days, whichever is longer. Any product replaced under this.

Customer Service

• Website: www.cleeraudio.com
• Ph: 1 888 672 5337 (67 CLEER)