EarFun Go-Speaker Portable Bluetooth Speaker User Guide

EarFun Go-Speaker Portable Bluetooth Speaker

What’s in the Box

EarFun Go

User Manual

Type-C USB Cable

Buttons & Indicators

1. Power Button
2. Bluetooth Button
3. Multi-function Button
4. Volume- Button
5. Volume+ Button
6. Speaker LED Indicator
7. Microphone

Connections

1. Plugging in an audio cable will automatically switch from Bluetooth mode to AUX mode.
2. When using AUX mode, control audio playback via the connected device.
3. To preserve battery lifespan, fully charge at least once every 45 days.

Battery 

You can check the speaker battery level on the device that is paired with:

• For iOS (Support iOS 9 or higher):
• Step1: Click the ‘Edit’ and add the ‘Batteries’ widget, then click ‘Done’.
• Step 2: The battery level has been shown on your device.
•  For Android (Support Android 8.0 or higher): It varies from the Android device; please refer to the instruction manual of your device.

Bluetooth Pairing

• When turned on, Go will automatically connect to the last connected device if available.
• If not, Go will enter pairing mode.
• If the speaker is not paired with any device and has not operated for 300 minutes, it will shut down automatically.

Speaker LED Indicator

True Wireless Stereo Connection with Two EarFun Gos

• Step 1: Pair and connect Go A to your Bluetooth device.

• Step 2:Power on Go B, and press the Bluetooth buttons of the two speakers simul

• Step 3: The two indicators stay blue, and the speakers enter True Wireless S

1. \Once the two GOs have entered wireless stereo pairing mode before, you don’t need them for the first time. Simply power on the two GOs, and they will connect automatically.
2. While in TWS mode, you can use one of the buttons to control both Gos at will.
3. Tap the Bluetooth button twice quickly to change the left and right channels.

Functions

• Playing Music

• Speakerphone

Reset and Reconnect

If this speaker becomes disconnected or has another connecting problem, you can press and hold the “Volume +” and “Volume –” buttons simultaneously for 5s at least to clear the pairing of the speaker and remove the old pairing in your Bluetooth device, and then pair again.

If this speaker becomes out of control and can’t be powered off, you can press and hold the power button for at least 8 seconds to reboot.

Specifications

• Bluetooth Version: V5.0
• Bluetooth Profile: A2DP, AVRCP, HFP, HSP
• Transducer: 2 x 40mm
• Output Power: 2 x 6W
• Signal-to-noise Ratio: 80dB
• Battery: (7.4V, 2200mAh)
• Play Time: Up to 24 hours(varies by volume level and audio content)
• Charging Time: About 4 hours
• Input Power: 5V/2A
• Dimensions : 58 x 171 x 62 (mm)
• Weight: 430g

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly. You must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claim may not be recognised:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorised person or mechanical damage through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wearageing of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19/EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there’s no guarantee that interference will not occur in a particular installation.

• Consult the dealer or an experienced radio/TV technician for help.
• Increase the separation between the equipment and the receiver
• Reorient or relocate the receiving antenna.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure requirements. The device can be used in portable exposure conditions without RF restriction. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions

• This device may not cause interference, and
• This device must accept any interference, including interference that may cause undesired operation of the device.”

EU Declaration of Conformity

Earfun Technology (HK) Limited hereby declares that this equipment complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EU Directive.

UK Declaration of Conformity

Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment type [K2] complies with UK Radio Equipment Regulations (SI 2017/1206).

ISED Compliance Statements

This device contains licence-exempt transmitters/receivers (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Customer Service

• Website: www.myearfun.com
• Email: service@myearfun.com
• Ph: +91-99997-92449

FAQs

Q: What devices can the EarFun Go-Speaker connect to?

Any Bluetooth-capable device, such as computers, tablets, smartphones, and some smart TVs, can pair with the speaker. If a wired connection is supported by your device, you can also use the AUX input.

Q: How long does the battery last?

With a lengthy battery life that varies based on volume level and audio mode, the EarFun Go-Speaker is made for listening all day. On a full charge, most users can anticipate playing continuously for several hours.

Q: Is the speaker waterproof?

Indeed. Because the Go-Speaker is designed for outdoor use and usually has a water-resistant or waterproof grade (such as IPX7), it is safe for trekking, poolside use, and wet weather. For a precise rating, check your particular model.

Q: Can I pair two speakers together for stereo sound?

Indeed. With the Go-Speaker’s dual-speaker pairing feature, you can wirelessly connect two devices for more expansive, stereo-quality sound.

Q: Does it have a built-in microphone?

You may use your phone’s voice assistant or make hands-free calls with the built-in microphone found in many Go-Speaker models.

Q: How loud is the EarFun Go-Speaker?

With improved bass performance, the speaker produces a powerful, room-filling volume. It has sufficient power for outdoor activities, small parties, and background music in bigger spaces.

Q: How long does it take to charge?

Using USB-C, a complete charge usually takes several hours. If your setup and device permit it, you can keep listening while it charges.

Q: Can I use the speaker while it’s plugged in?

Indeed. Uninterrupted listening is made possible by the Go-Speaker’s ability to function while charging.