ADLER AD 7057 Power 300 W Water Tank
Safety Instructions
- Connect the device to a 220-240 V ~ 50/60 Hz grounded socket only.
- Be especially careful when using the device when children are around.
- Always remove the plug from the socket after use by holding the socket with your hand.
- Do not immerse the cord, plug, or the entire appliance in water or any other liquid.
- Periodically check the condition of the power cord.
- Do not repair the device yourself, as this may result in electric shock.
- Any repairs may only be made by authorized service points.
- Improperly performed repair may result in danger to the user.
- Do not use the device near flammable materials.
- Keep the power cord away from hot surfaces.
- Do not leave the device switched on or the mains adapter unattended.
- Do not allow the motor part of the device to get wet.
- Do not use the device outside the home; use it indoors only.
- Do not use the vacuum cleaner to pick up flammable substances (such as fuel, solvents).
- Do not vacuum objects with sharp edges (e.g., glass shards).
- Do not direct the suction tube of the vacuum cleaner towards other people or animals.
- Be especially careful when vacuuming the stairs; take care of your own safety.
- Do not block any ventilation openings.
- Do not run the vacuum cleaner without the filter in place.
- Do not pull the vacuum cleaner by the hose.
Description
- Power cord
- Handle release
- Power knob
- Power indicator light
- Mop head
- Cable hook
- Handle tube
- Top handle release button
- Water tank and plug
- Microfiber mop pad
- Pitcher with measuring cup mop:
- Carpet pad
- Mop head release
Before First Use
- Remove all packaging and disassemble the separate components.
- After unpacking, inspect the steam mop for visual damage such as:
- Misaligned or damaged parts
- Damage to the main body and individual components
Damage to the Plug or Cable
Before assembling/disassembling any part of the product, make sure that the device is unplugged and has cooled down sufficiently.
- Mounting the bracket (Figure B, page 3)
- The bracket consists of 2 parts:
- 1x handle
- 1x tube
Attaching the Mop Head
- Attach the handle to the tube, applying slight pressure until you hear a click.
- Once attached, place the set on top of the main unit so that the tube hook is parallel to the back of the unit.
- Press the latch on the base to allow the handle to be fully inserted and secure. It should “snap” into place.
- If you want to remove the handle, simply press the release button (2) on the front of the unit and pull upward.
- Attach the mop head (5) to the main body by aligning and lowering the unit onto the mop head connector until it snaps into place.
- You can remove the floor head by pressing the release button (11) above and lifting the unit.
Microfiber Mop Pad
- The steam mop should never be used without the microfiber pad (12) in place.
- To attach the pad, place it on the floor with the Velcro facing up.
- Lift the mop over the pad and align the mop head with the mop pad.
- Lower the head and rest the mop on it to attach the Velcro to the head.
- To remove the cap, place your foot against the protruding piece of material and lift the mop.
Cleaning & Care
Disconnect the power plug from the wall outlet before cleaning the unit. Use a damp, soft cloth and mild detergent to clean the exterior of the unit.
When wiping the body, do not allow the area around the switch (3) to become damp. Wash non-electric accessories in warm, soapy water and allow to dry thoroughly before next use.
- Care of microfiber cleaning pads
- Wash the pads in warm water, no higher than 40 degrees.
- Wash separately from other clothes. Do not use fabric softener and do not tumble dry.
- If there are loose threads on the microfiber pad, carefully cut them off with scissors.
- Do not try to pull any threads or cut any threads at the base.
- To purchase new pads, contact your dealer and ask for the pads:
Technical Data
- Power: 1300W
- Voltage: 220-240 V ~ 50/60 Hz
Environmental Instructions
- Dispose of cardboard packaging and polyethylene (PE) bags in the appropriate containers for separate collection of municipal waste according to their description.
- If there are batteries in the device, remove them and separately return them to the collection and storage facility. Return the used device to a suitable collection and storage facility, as the hazardous substances in it may pose a threat to health and the environment.
- Waste electrical equipment is waste that contains substances harmful to humans, animals, and the environment.
- These substances can lead to contamination of the soil, water, or air, and through this they can get into the human body and lead to numerous health ailments, such a vision, hearing, and speech disorders; they can also lead to kidney, liver, and heart damage, and cause skin diseases.
- Harmful substances can also have adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on the contaminated soils, and products made from them, may risk the above-mentioned health effects.
- Do not dispose of the device in the municipal waste container!!! Service: If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt directly.
Customer Service
- Website: service@adlerglobal.com.
- Ph: 0800 9753 003
- Timings: Mo – Fr, 8:30 am – 5:00 pm
FAQs
Q: What is the power rating of the ADLER AD 7057 Water Tank?
With its 300W operation, the AD 7057 efficiently heats water while using less energy.
Q: What is the water capacity of the tank?
With its two-litre size, the water tank is ideal for small-scale home or office use.
Q: What type of water is suitable for this tank?
Use only filtered or clean tap water. Steer clear of mineral-heavy, syrupy, or salty water to avoid damage and scale accumulation.
Q: Does the water tank have an automatic shut-off?
Indeed, when the water reaches the appropriate temperature or the tank is empty, the AD 7057 will automatically shut off.
Q: How long does it take to heat water?
It usually takes 8 to 12 minutes to heat 2 litres of water, depending on the amount and initial temperature.
Q: Does the tank have a keep-warm function?
No, there is no keep-warm feature on the AD 7057. For optimal effects, use water right away after heating.
Q: Is the tank safe for children?
Indeed, the exterior is made to stay cold to the touch, but because of the hot water inside, care should be used.
Q: How do I know when the water is heated?
When the water reaches the desired temperature, either the indication light will go out or the heating element will turn off on its own.