iottie chwrio301 iON Fast Charging Pad
Getting Started
- Please make sure your device is Qi Wireless compatible. Compatible devices include iPhone X, 8 Plus, 8, Samsung Galaxy S9, S9+, Note 8, S8, S8+, S7, S7 Edge, S6, S6 Edge, and any other Qi-enabled devices.
- Not all smartphones can receive a wireless fast charge; however, they will receive a standard wireless charge. Check your phone’s charging features for fast charge capabilities.
- Please only use the included cable and power adapter. Third-party components may impact wireless charging performance.
- If using a third-party charger, please only use a Qualcomm Quick Charge 3.0 or equivalent adapter. Plugging the Charging Pad into the computer will not| provide adequate power to support wireless fast charging. Please only plug directly into a Power Adapter.
At a Glance
What’s in the Box
Operation
- During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot. Environment.
- If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. The device is only to be operated in a dry, indoor environment.
- Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In cooler temperatures.
- Operating this device in a hot environment or direct sunlight for a long period of time may cause malfunctions. We recommend keeping the product.
- Please use the included components for an optimal experience. To support Qi fast charge when using a third-party car charger or a USB Power Adapter, use a Qualcomm Quick Charge or 3.0 equivalent adapter. Connection.
- If your phone is misaligned when wireless charging, your device may become warm due to inefficient wireless output. It is important to always properly align your smartphone, especially when charging 2 devices via wireless and wired.
Key Features
Qi Wireless Fast Charging
- Charge smartphones faster than a standard wireless charger. Max Wireless Charging Capacity: 7.5W iPhone, 10W Android
Charging Hub
- Powerful 18W USB-C input allows simultaneous wireless and wired charging. Charge a second device via USB-A output. Max USB-A Charging Capacity: 12W|
Heat Ventilation
- Internal air vent structure reduces heat to maximize wireless charging efficiency.
Slip Resistant
- The charging surface features an Anti-Slip Ring iottie chwrio301 iON Fast Charging Pad to prevent smartphones from shifting while charging wirelessly.
Preparation
- Please only use the included cable and power adapter. Using third-party components may impact wireless charging performance.
- Plug the Charging Cable into the USB-C port on the back of the charging pad and connect the USB-A side to the Power Adapter.
- Plug the Power Adapter into an AC outlet. The Charging Indicator will turn on and then fade to inform you that the pad has received power.
Qi Alignment Guide
- Use the guide below to receive an efficient wireless fast charge.
Qi Coil Location
- The Qi coil is generally found in the center of most smartphone models
Smartphone alignment
- Center the back of the smartphone in the center of the Anti-Slip Rina for fast and efficient wireless charging.
- Rest your smartphone on the charging surface parallel| to the Charging Pad
Specifications
Charaina Pad
Wall Charger
Troubleshooting
Your device’s screen will show that it is charging. If your phone is not charging, check the Charging Indicator on the front of the device:
Please contact customer service at cs@iottie.com if you have any questions.
Declaration of Conformity (FCC)
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and usedbyh the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Customer Service
- Website: cs@iottie.com
- Tel: (201) 580-2688
FAQs
Q: What devices are compatible with the iottie CHWRIO301 iON Fast Charging Pad?
Ans: Samsung Galaxy, Google Pixel, Apple (iPhone 8 and later), and other Qi-certified models are among the well-known brands of smartphones and gadgets that the iON Fast Charging Pad is compatible with.
Q: What is the maximum charging power of the CHWRIO301?
Ans: In comparison to conventional wireless chargers, the charging pad offers compatible devices up to 15W rapid wireless charging, resulting in faster power-ups.
Q: Does the charging pad require a special power adapter?
Ans: Use a USB Power Delivery (PD) adapter or Quick Charge 3.0 with a rating of 18W or higher (not supplied) for the best rapid charging. Although it will charge more slowly, using a typical 5W charger will still function.
Q: How do I know if my device is charging?
Ans: An LED indicator light on the charging pad usually lights or blinks to show that the gadget is positioned appropriately and charging. For information on particular LED signals, consult the handbook.
Q: Can I use my phone while it’s charging on the pad?
Ans: Yes, you can use your phone while it’s charging, but stay away from demanding games and high-power activities that could reduce charging speed or raise the device’s temperature.
Q: How should I position my device on the charging pad?
Ans: For optimal charging performance, position your smartphone centre and flat on the charging surface. Slower charging or no charging at all can result from misalignment.