Palmer kyll 2-Kanal Line Isolation Box Instruction Guide

Palmer kyll 2-Kanal Line Isolation Box

Introduction

The wupper Line Isolation Box is equipped with 6.3 mm jack sockets on the input and output sides, which can be operated both balanced and unbalanced. There is galvanic isolation between input and output by means of a high-quality transformer, and hum loops are reliably eliminated. The Line Isolation Box is perfect for balancing audio signals, and audio signals can also be transmitted over long cable runs without hum.

Safety Instructions

1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Use the device in the prescribed manner only.
5. Do not open the device and do not perform any modifications.

Packaging

1. Packaging can be fed into the reusable material cycle using the usual disposal methods.
2.  Please separate the packaging in accordance with disposal laws and recycling regulations in your country

Device

1. This device is subject to the European Waste Electrical and Electronic Equipment Directive in the currently valid version.
2. WEEE Waste Electrical and Electronic Equipment Directive. Old appliances do not belong in household waste.
3. The old device must be disposed of via an approved disposal company or a municipal disposal facility.
4. Please observe the applicable regulations in your country!
5. Observe all disposal laws applicable in your country.
6. As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or the appropriate regional authorities.

Batteries

1. Observe all disposal laws applicable in your country.
2. As a private customer, you can obtain information on environmentally friendly disposal options from the seller of the product or through the relevant regional authorities.

The product is not suitable for

• Persons (including children) with limited physical, sensory, or mental abilities or a lack of experience and knowledge.
• Children (children must be instructed not to play with the device)

Connections

1. INPUT
   Line input with 6a.3 mm jack socket suitable for both unbalanced and balanced cabling. Use a shielded audio cable to connect, for example, a keyboard to the Line Isolation Box.
2. OUTPUT
   Line output with a 6.3 mm jack socket suitable for both unbalanced and balanced cabling. Use a shielded audio cable to connect the Line Isolation Box to an input of a mixer or audio interface.

Wiring Example

Technical Data

Manufacturer’s Declarations

Herstellergarantie und Haftungsbeschränkung Manufacturer’s warranty & limitation of liability Adam Hall GmbH Adam-Hall-Str. 1 61627 Neu-Anspach, Germany.

CE Conformity

Adam Hall GmbH hereby confirms that this product, Palmer Pan16 19“ DI-bo,x meets the following guidelines (where applicable): Low-Voltage Palmer kyll 2-Kanal Line Isolation Box Directive (2014/35/EU), EMC Directive (2014/30/E/U), RoHS (2011/65/EU), RED (2014/53/EU)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

UKCA- Conformity

Hereby, Adam Hall Ltd. declares that Palmer Naab 2-Kanal Media DI-Box this product, Palmer Pan16 19“ DI-bo,x meets the following guidelines (where applicable): Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016 (SI 2016/1091). The Restriction of the Use of Certain Palmer Pan16 19“ DI-box Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 (SI 2012/),32,) Radio Equipment Regulations 2017 (SI 2016/2015), Adam Hall Ltd. | The Seedbed Bus. Centre | SS3 9QY Essex | UK

Customer Support

• Email: Info@adamhall.com
• Website: www.adamhall.com/compliance
• Ph: +49 (0)6081 / 9419-0

FAQs

Q: What is the main function of the Palmer KYLL 2-Kanal?

It guarantees safe, noise-free signal transfer between audio equipment, gets rid of ground loops, and lessens hum and interference.

Q: Can I connect instruments directly to the KYLL 2-Kanal?

For best results, passive instruments with high-impedance outputs usually need a DI box, while some instruments with active outputs might function.

Q: Does the KYLL require external power?

No, the KYLL is a passive device. Transformers of superior quality offer complete isolation without the need for an external power source.

Q: Will the KYLL affect the sound quality?

Because of the transformer-based construction, there are very few tone alterations. Slight colouration is usually insignificant and even undetectable in professional installations because the main goal is signal integrity—reducing hum, buzz, and ground loop issues.

Q: Can both channels be used independently?

Indeed. The KYLL is perfect for stereo configurations or distinct mono feeds in the same system because each channel is completely independent.

Q: Is the KYLL suitable for live performances?

Indeed. It is perfect for live sound engineers, studios, and rehearsal areas because of its sturdy design, silent operation, and capacity to remove ground loops.