Panasonic EH-NA65 Household Hair Dryer
Safety Instructions
- Failure to do so may cause a burn or fire.
- Always turn OFF the main switch and disconnect the power plug from the household outlet after use.
- Failure to do so may cause a fire or burn.
- Disconnect the power plug by holding onto it instead of pulling on the cord.
- Regularly clean the power plug to prevent dust from accumulating.
- Failure to do so may cause a fire due to insulation failure caused by humidity.
- Disconnect the power plug and wipe with a dry cloth.
- Failure to do so may cause an accident or injury.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom.
Description
- Air outlet
- Set nozzle
- nanoe™ outlet
- nanoe™ lamp
- Cool-shot button
- Handle
- Ring for hanging
- Cord
- Power plug: The shape of the power plug differs depending on the area.
- Temperature selector
- Main switch
- Air inlet
- nanoe charge panel
- Quick-dry nozzle
- Diffuser
Quick Dry Nozzle
For drying hair quickly
Attach the quick-dry nozzle so that this air outlet is vertical.
- Set nozzle
- For precise styling
- Diffuser
- For creating full-bodied hair with lots Panasonic EH-NA65 Household Hair Dryer of volume and styling
How to Use
Always check that the filter is securely attached before singing.
- Select the temperature of the airflow with the temperature selector (J).
- Select the intensity of the airflow with the main switch (K).
About nanoe
What is nano?
nanoe generation method: High-voltage discharge) nanoe™ is charged fine water particles, generated by applying high voltage to split water. Its diameter is smaller than/100 of a team, and it cannot be seen with the naked eye. Since nanoe™ is generated by collecting water in the air, it may be difficult to generate in certain cases, depending on the environment. (It is harder to collect water in the air when it is cold, and the humidity is low.
How nanoe works
Generally, your hair has properties that make it easy to become positively charged with electricity. These properties strongly attract negatively charged nanoe™, which penetrates the hair with moisture. Furthermore, they make the hair slightly acidic, tighten cuticles, and keep your hair strong, elastic, a nd healthy
nanoe charge panel
When nanoe™ continues to strike hair, hair becomes negatively charged. As a result, the nanoe™ and negatively charged hair repel each other, making it difficult for nanoe™ to react with hair. With the nanoe™ Charge System, by just gripping the panel together with the handle, the negative charge accumulated on hair is released. Because of this, the nanoe™ Panasonic EH-NA65 Household Hair Dryer continues to penetrate into hair, supplying moisture and thoroughly moistening down to the tips of hair.
Maintenance
- Make sure to turn OFF the main switch and disconnect the power plug from the household outlet. (Except when performing maintenance on the air outlet)
Clean the housing only with a soft cloth slightly dampened
with tap water or soapy tap water.
- Do not use thinner, benzine, alcohol, or other chemicals.
- Doing so may cause malfunction, cracking/discoloration of parts, etc.
- Leaving the hair dryer with hair products or makeup still adhering to the handle or body may degrade the plastic, causing discoloration or cracking and malfunction.
Maintaining the nano outlet
- Use commercially available cotton swabs. (We recommend the thin cotton swabs made for use with babies.)
- This maintenance allows the hair dryer to sustain the generated level of nanoe™ over a long period.
- Dampen the end of the cotton swab with tap water.
- A needle portion is located deep within the nanoe™ outlet. Using the swab, rub this portion gently about 5 times.
Filter
- At least once a month, when dust, etc., has built up, detach the filter from the hair dryer and remove the du, st e, etc. Using a toothbrush or vacuum cleaner.
- Use a commercially available toothbrush.
- Pull on the catch on the bottom Panasonic EH-NA65 Household Hair Dryer side of the filter to detach.
- Remove any u-st, etc., adhered to the filter or air inlet.
- Remove the dust, etc., adhered to the outside of the filter using a vacuum cleaner. If this does not remove the dust, use the thick part of your fingers to push the du, st etc through the fine mesh on the internal side towards the metal mesh on the external side, and scrub away carefully with a toothbrush.
- Using the toothbrush, carefully scrub away any dirt, teeth, etc. from the internal side of the filter.
- Using a vacuum cleaner or toothbrush, carefully remove any dirt, juice, etc. Adhered to the air inlet.
- Rubbing forcefully with your nails may tear the filter, so please use a toothbrush. Attach the filter securely, starting with the upper side.
- Keep pressing until you hear a “click” from both upper and lower catches.
Maintaining the air outlet
- The hair dryer should be plugged into the household outlet only in case of maintenance for the air outlet.
- Use a commercially available toothbrush.
- Switch the temperature selector to “Cool” and blow away the dust, etc., as you scrub with the toothbrush.
- During maintenance, do not block the air inlet with your hands, etc.
- Be careful when using the Panasonic EH-NA65 Household Hair Dryer for the first time after maintenance, since it may blow
out dust, etc.
- Scrub to remove any dust, hair, etc., blocking the mesh.
Specifications
| Product name | Hair Dryer | ||
| Product model | EH-NA65 | ||
| Power source | 220 V 50-60 Hz | 230 V 50-60 Hz | 240 V 50-60 Hz |
| Power consumption | 1700 W | 1850 W | 2000 W |
| Accessories | Set | nozzle, quick-dry nozzle, diff | user |
This product is intended for household use only.
Troubleshooting
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorised by Panasonic for repair.
Customer Service
- Ph: Middle East and Africa. (+971) 800 7262.
- Website: https://www.panasonic.com/
- Timings: 9:00 AM – 8:00 PM (Monday – Friday), 10:00 AM – 7:00 PM (Saturday – Sunday).
FAQs
Q: What are the heat and speed settings?
With its three temperature settings and three airflow speeds, the EH-NA65 lets you tailor the drying process to your hair type.
Q: What is the “nanoe™” feature?
To help keep moisture, lessen frizz, and leave hair smooth and shining, the nanoeTM technology emits ultra-fine hydrated ions.
Q: How do I activate the nanoe™ function?
Press the handle’s nanoeTM button. When nanoe™ mode is engaged, the LED indication will illuminate.
Q: Can I use the hair dryer on wet hair?
Indeed. The EH-NA65 is intended for use on wet hair at home. For delicate or fine hair, use lower heat settings.
Q: Can the hair dryer reduce static and frizz?
Indeed. When paired with negative ion technology, the nanoeTM function helps smooth hair by reducing frizz and static electricity.
Q: Is this hair dryer suitable for all hair types?
Indeed. Straight, wavy, curly, and fine hair can all be styled with the EH-NA65; however, customers should modify the heat and speed settings based on the sensitivity and thickness of their hair.
Q: Can I use the hair dryer internationally?
The EH-NA65 is intended for 110–120V home power. A voltage converter can be necessary when using it in nations with differing voltages.
Q: How do I use the cool shot feature?
To expel cool air, press and hold the Cool Shot button. This adds shine and helps set hairstyles. To go back to the previous heat setting, let go of the button.