Ronix 8922 20 V Cordless Leaf Blower Instruction Manual

Ronix 8922 20 V Cordless Leaf Blower

Safety Instructions

1. Keep the work area clean and well-lit lit Cluttered and dark areas invite accidents.
2. Power tools create sparks, which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
4. Distractions can cause you to lose control.
   
5. Power tool plugs must match the outlet. Never modify the plug in any way.
6. Do not use any adapter plugs with earthed (grounded) power tools.
7. Unmodified plugs and matching outlets will reduce the risk of electric shock.
8. There is an increased risk of electric shock if your body is earthed or grounded.
9. Do not expose power tools to rain or wet conditions.
10. Water entering a power tool will increase the risk of electric shock.
11. Do not abuse the cor.d Never use the cord for carrying, pulling, or unplugging the power tool.
12. Keep the cord away from heat, oil, sharp edges, or moving parts.
13. Damaged or entangled cords increase the risk of electric shock.
14. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
15. Use of a cord suitable for outdoor use reduces the risk of electric shock.
16. Use of an RCD reduces the risk of electric shock.
17. Stay alert, watch what you are doing, and use common sense when operating a power tool.
18. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
19. A moment of inattention while operating power tools may result in serious personal injury.
20. Avoid accidental starting. Ensure the switch is in the off position before plugging in.
21. Remove any adjusting key or wrench before turning the power tool on.
22. Use of these devices can reduce dust-related hazards.

Prepation

1. Always wear substantial footwear and long trousers while operating the blower.
2. Do not wear loose clothing or jewelry that can be drawn into the air inlet.
3. Keep long hair away from the air inlets.
4. To prevent dust irritation, the wearing of a face mask is recommended.
5. While operating the machine, always wear nonslip and protective footwear.
6. Nonskid, closed-toed safety boots and shoes will reduce the risk of injury.

Specifications

Part List

Use & Care

• Do not force the power tool. Use the correct power tool for your application.
• The correct power tool will do the job better and safer at the rate at which it was designed.
• Do not use the power tool if the switch does not turn it on and off.
• Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• If damaged, have the power tool repaired before use.
• Many accidents are caused by poorly maintained power tools.

Operation

1. Operate the blower only in daylight or in good artificial light.
2. Do not overreach and keep proper balance and footing at all times.
3. Always be sure of your footing on slopes.
4. Keep all cooling air inlets clear of debris.
5. Never blow debris in the direction of bystanders.
6. Operate the blower in the recommended position
7. Do not operate the blower in high places.
8. Never point the nozzle at anyone in the vicinity when using the blower.
9. Never block the suction inlet and/or blower outlet.
10. Do not use nozzles other than the nozzles provided by RONIX.
11. Do not use the blower to inflate balls, a rubber boat, or similar.
12. Do not operate the blower near open windows, etc.
13. Using rakes and brooms to loosen debris before blowing is recommended.
14. If the blower is damaged, ask RONIX Authorized Service Centers for repair.
15. Do not insert fingers or other objects into the suction inlet or the blower outlet.
16. Never blow dangerous materials, such as nails, fragments of glass, or blades.

Maintainance & Storage

1. Keep all nuts, bolts, and screws tight to be sure the blower is in a safe working condition.
2. If the parts are worn or damaged, replace them with parts provided by RONIX.
3. Store the blower in a dry place out of the reach of children.
4. Cool down the blower before making any work on it. Maintain the blower with care and keep it clean.
5. Always cool down the blower before storing.
6. Do not expose the blower to rain. Store the blower indoors.
7. When you lift the blower, be sure to bend your knees and be careful not to hurt your back.
8. When you stop the blower for inspection, servicing, storage, or changing an accessory, switch off the blower and make sure that all moving parts come to a complete stop, and remove the battery cartridge.

Service

1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
2. Never service a damaged battery pack. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Assembly

INSTALLING THE FRONT NOZZLE

1. Loosen 2 screws with the hex wrench, and then pull the screws all the way.
2. Make sure that the RONIX logo on the front nozzle is facing the direction shown in the figure, and then attach the front nozzle to the machine.
3. Tighten the screws with the hex wrench.

Accessories

1. Attach the adapter pipe to the front nozzle, and then turn it clockwise to lock it into place.
2. Attach the flat nozzle or extension nozzle to the adapter pipe, and then turn it to lock it into place.

CRUISE CONTROL FUNCTION. The cruise control function allows the operator to maintain speed after turning on the switch. Turn the switch forward to start working and increase the speed.

Turn the switch backward to decrease the speed and stop Ronix 8922 20 V Cordless Leaf Blower working. “0” = OFF “I” = Low speed “II” = High speed

Storage

The hook hole on the bottom of the machine is convenient for hanging the machine from a nail or screw on the wall. Store the machine in a place out of the reach of children and not exposed to moisture or rain.

Customer Support

• Address: Lyoner Str. 36 60528 Frankfurt am Main
• Tel:+49 69 310 900 66
• Website: www.ronixtools.com

FAQs

What type of battery does the Ronix 8922 use?

With its long service life and steady power output, this blower runs on a 20V lithium-ion rechargeable battery.

How long can I use the blower on a full charge?

The Ronix 8922 normally lasts 20 to 30 minutes on a full charge, depending on the speed and operating parameters chosen.

Can I adjust the airspeed or power level?

Yes, the Ronix 8922 has variable speed control, which lets you change the airflow intensity according to the surface and kind of trash you’re cleaning.

Can I use the same battery with other Ronix 20V tools?

Indeed! All Ronix 20V cordless tools are fully compatible with the 20V lithium-ion battery, which makes battery swapping between devices easy.

What maintenance does the blower require?

Maintain dust-free and clean air vents, clean the nozzle after each use, periodically inspect the battery contacts, and keep the blower in a dry location when not in use.