Vevor ZG-C(3T) ZG-A(5T) Air Jack
Safety Instructions
WARNING: Please read these instructions carefully before using your jack. Proper use and care of the jack will be helpful to assure you of continuous safe, trouble-free problems.
- The air jack is specially designed for work requiring heavy lifting.
- It cannot be used as a support element for permanent positioning.
- If you need to support the vehicle for a long time, please use a bracket to support it.
- Do not exceed the maximum lifting load. It is forbidden to lift people or animals. For lifting only.
- The air jack is only used in the process of rising and falling.
- Please make sure that the ground can support the weight you are lifting.
- The jack must be placed on relatively level, solid ground.
- The jack shall be placed under the lifted axle box to support the load on the middle part of the jack.
- Never adjust the safety valve.
- Please place a triangle block under the car dependency wheel.
- The normal operating pressure is in the range of 0.8-1.0MPa.
- Compressed air should be clean and contain no water.
- When used, the jack should take a position outside of the center for 10-20 cm.
- And please use the supplied accessories.
- Do not exceed the rated capacity, or loss of load may occur.
Lifting
- Don’t exceed the rated capacity, or loss of load may occur.
- Always firmly apply the parking brake.
- Only use for level surfaces; on uneven, unstable surfaces, it could result in instability and possible failure to support the load.
- Always center the jack under the axle of a flat reinforced or frame surface.
Technical Data
Packing List
Product
- Fix the valve component.
- Fix the 2 handles.
- Connect the inflation hose securely.
ZG-H (3T)
- Fix the valve component.
- Connect the inflation hose securely.
ZG-E(3T)
- Fix the valve component.
- Connect the handle and fix it
- Fix the bottom of the handle.
- Connect the inflation hoses securely
ZG-C (3T) ZG-A(5T)
- Connect the handle and fix it.
- Connect the inflation hoses securely.
Using the Device
When inflated, the jack will rise and vice versa.
- Assemble the product, and connect the inflation hose to the corresponding socket.
- Insert the line with Vevor air jack instructions compressed air in the right gas nozzle, and close the left switch.
- To fall the jack, please open the left switch.
Customer Service
- Website: https://www.vevor.com/
- Manufacturer:Â Cixi Jirui Electric Appliance Co., Ltd
- Add:Â 118# Nanxin Road, Zonghan Street, Cixi City, Zhejiang Province
- E-mail:Â CustomerService@vevor.com