Russell Hobbs 24420 Steam Generator Iron Instruction Guide

Russell Hobbs 24420 Steam Generator Iron

IMPORTANT SAFEGUARDS

Read the instructions, keep them safe, and pass them on if you pass the iron on

• Route the cable so it doesn’t overhang and can’t be tripped over or caught. Don’t iron clothing while it’s
• being worn – you’ll burn or scald the wearer. Don’t touch the soleplate, and keep away from the steam
• coming from it. Don’t use the iron in the vicinity of children. Don’t sit the base unit on a soft, carpeted,
• or upholstered surface, as this may block the vents underneath the base unit.
• Keep the cables and steam pipe away from the hot parts. Don’t use the iron for any purpose other than
• those described in these instructions. Take care not to scratch the soleplate – avoid buttons, zips, etc.
• The iron has a protective thermal fuse, which will blow if it overheats. If this happens, the iron will stop
• working, and it must be returned for repair.

HOUSEHOLD USE ONLY

DIAGRAMS

1. Temperature control
2. Steam trigger
3. Steam pipe
4. Mark
5. Power light
6. Reservoir
7. Hose clip
8. Plug socket storage
9. Resin filter (inside reservoir)
10.  On/off button
11.  Steam-ready light

BEFORE FIRST USE

• Remove any labels, stickers, or packaging from the iron and soleplate. Before using the iron for the
• first time, or if it’s not been used for a long time, iron a scrap piece of cotton (an old towel is ideal) to
• remove any accumulated residues. Don’t worry if the iron smokes a bit at first; it will soon stop as the
• manufacturing residues evaporate.

FILLING/REFILLING

• Don’t add anything to the water, and don’t use water with anything added to it. When the water is converted to steam, chemicals, perfume, and other additives will coat the inside of the steam chamber, shortening the life of the iron.

1. Remove the reservoir by pulling it away from the body of the steam station using the grip on the front
   of the reservoir.
2. Fill the reservoir to the max mark. Do not exceed the max mark.
3. Refit the reservoir into the base unit.

PRELIMINARY SETTINGS

1. Put the iron on top of the base unit.
2. Put the plug into the power socket (switch the socket on, if it’s switchable).
3.  Turn the unit on by setting the on/off button to I.

Turn the temperature control to bring the setting you require next to the mark.

TEMPERATURE SELECTION GUIDE

1. Check for textile care symbols.
2. Iron fabrics needing low temperatures first, then those that need medium temperatures, and finish
   with those needing high temperatures (or max).’
3. Turn the temperature control to bring the setting you require next to the mark.

If the instructions on the fabric label differ from this guide, follow the instructions on the label.

STEAM IRONING

1. Set the temperature control to S or higher – otherwise the steam might condense on the soleplate, giving you water instead of steam.
2. Squeeze the steam trigger to produce steam, release it to stop.

Note: When you first start your steam station and pull the trigger for steam ironing, there will be a
delay as your steam station pumps water from the reservoir to prime the system. This is normal and
may take 20-30 seconds. This will also happen after refilling the reservoir.

STEAM READY LIGHT

The steam-ready light will flash while the iron is heating up. Wait until the steam-ready light stops flashing
before trying to steam iron. Note that operating the steam trigger will have no effect until the steam ready
light stops flashing.

DRY IRONING

You can dry iron by just not pressing the steam button, but if you want to make sure you don’t press it accidentally, then you should iron with an empty reservoir. You can do your dry ironing first, then switch off, fill the reservoir, and do your steam ironing.

VERTICAL STEAMING

Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.

• Check that there’s adequate ventilation behind the fabric; otherwise, moisture may build up, causing mildew.
• Check that there’s nothing behind Russell Hobbs 2442,0 the fabric that may be damaged by the steam.
• Check that pockets, turn-ups, and cuffs are empty.

1. Check that the temperature control is at S or higher.
2. Hold the iron close to (but not touching) the fabric. Hold it well away from delicate fabrics. We recommend using the steam trigger to produce steam for smaller areas, as it gives you better control.

AFTER USE

1. Put the iron on top of the base unit and turn the temperature control to •.
2. Press the O button and unplug the base unit.
3.  Empty the reservoir.
4.  Let the iron cool down completely before cleaning it, moving it, or storing it away.
5.  The steam pipe can be coiled together and placed into the hose clip.
6.  Wrap the mains cable around the steam station in an anti-clockwise direction, then slot the plug into
   the socket (Fig B).

CARE AND MAINTENANCE

1. Unplug the base unit, and let the appliance cool down fully.
2. Wipe outer surfaces with a damp cloth. If necessary, use a little washing-up liquid.
3.  Remove spots from the soleplate with a little vinegar.
4. Take care not to scratch the soleplate.

ANTI-SCALE CARTRIDGE

1. Switch off and unplug your steam station
2. Allow your steam station to cool down for at least 1 hour until the soleplate is cold.
3.  Remove the water tank from the front of the unit.
4. Pull the thanti-scalele cartridge vertically out of the water tank. Note that the cartridge may contain
   water when it is removed Fig. g).
5. Fit the new cartridge and push it down firmly into the water tank.
6. Refill and refit the water tank.
7. Plug in your steam station.
8. Once the appliance is ready, pull the steam trigger until steam is produced. This will prime
   the system.

Important: Using the appliance without changing the cartridge can cause a reduction in the generated
steam output and damage the appliance. The guarantee will not cover damage caused to the appliance by not changing the anti-scale cartridge when required.

REPLACEMENT ANTI-SCALE CARTRIDGES

1. Have the appliance Model Russell Hobbs 24420 Number to hand, as we won’t be able to help you without it. It’s on the
   rating plate (usually underneath the product).
2. Ring 0845 658 9700, or email service@russellhobbs.com, for prices, then purchase replacements using VISA or MASTERCARD.

GUARANTEE

Defects affecting product functionality appearing within two years of the first retail purchase will be corrected
by replacement or repair, provided the product is used and maintained in accordance with the instructions.
Your statutory rights are not affected. Documentation, packaging, and product specifications may change without notice.

Customer Services

• Visit: www.russellhobbs.com
• Email: support@russellhobbs.com

FAQs

Q: How do I adjust the steam output?

Depending on the model, the iron may have buttons or a steam control dial. To change the intensity, turn the slider or hit the steam button. For fragile materials, use mild steam; for thick fabrics or creases, use strong steam.

Q: Can I use tap water in the iron?

In general, tap water is acceptable. To avoid limescale accumulation and preserve optimum performance, it is advised to use distilled or demineralised water if your water is hard.

Q: How do I refill the water tank during ironing?

Unplug the device and turn off the iron. After letting it cool a little, take out the water tank or open the fill cap and fill it to the top. To prevent leaks, never go over the maximum level.

Q: Can I use the iron vertically for steaming curtains or hanging garments?

Indeed. To release steam, hold the iron upright and press the steam button. This is perfect for reviving textiles or eliminating wrinkles from draperies and hanging clothing.

Q: Can I use the iron without steam?

Indeed. For routine ironing, set the steam control to “dry” or “no steam.” This is helpful for shiny or delicate textiles that might not respond well to dampness.

Q: How do I replace the water filter (if applicable)?

A water filter cartridge could be included with some versions. If you live in an area with hard water, make sure you follow the handbook recommendations to remove and replace the filter regularly.

Q: Where can I download the official instruction guide?

The Russell Hobbs 24420 Steam Generator Iron Instruction Guide can be found under Support Manuals & Downloads on the official Russell Hobbs website. Use the product number 24420 to search.