Rowenta IS5100 Garment Steamer Instructions Guide

Rowenta IS5100 Garment Steamer

Safety Instructions

1. Use the appliance for its intended use only.
2. To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
3. Appliances should always be turned «OFF» before plugging or unplugging from the outlet.
4. Never yank the cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
5. Do not allow the cord to touch hot surfaces.
6. Let the appliance cool completely before storing it away.
7. Loop the cord loosely around the appliance when storing.
8. Do not direct steam at people or animals, or use a steamer on garments while they are being worn.
9. Do not operate the appliance with a damaged cord, or if the appliance has been dropped or damaged.
10. Burns could occur from touching hot metal parts, hot water, or steam.
11. For water in the water tank only, and remove the water tank only when it is empty
12. Never drop or insert any object into any opening or hose.
13. Always keep the hose and nozzle elevated above the water tank.
14. Steam only in an up-and-down vertical motion.
15. Use caution when changing attachments, as they may contain hot water from condensation.
16. Ensure the attachments are cooled off to avoid contact with hot water.
17. This plug will fit in a polarized outlet only one way.
18. If the plug does not fit fully in the outlet, reverse the plug.
19. If it still does not fit, contact a qualified electrician to install the proper outlet.
20. Do not change the plug in any way.

Environmental Protection

• Your appliance contains valuable materials that can be recovered or recycled.
• When disposing of it, take it to a collection point or an approved service center.

Description

1. Steam head a. On/off and Steam Set button
2. Hook
3. Flexible fabric hose
4. Pole locking ring
5. Removable water tank
6. Telescopic pole
7. Rotating hanger
8. Dual clip system for pants: The Higher part hangs. The lower part needs to be tightened
9. Fabric brush
10. Power indicator light
11. Clips for pole fastening
12. Power cord clips

Assembly

Pole assembly

1. Place the base on the floor and put it in the water tank.
2. Insert the telescopic pole into the base and turn the locking ring to secure it in place.
3. Fit the hook onto the top of the pole until you hear a clicking sound.
4. Insert the hanger into the 2 holes located at the back side of the hook and pull it down to secure it.
5. Place the steam head on the hook.

Functioning of the Rotary Hangers

1. Gently pull the hanger (a) to free it from the notch located at the back of the hook
2. Turn the hanger to set it horizontally or to store it vertically.
3. Fit parts (a) and (b) together in the desired position.
4. The dual clip system is adjustable in height to be perfectly adapted to the different garment lengths.

Fabric Brush

• Insert the fabric brush into the holes located on the steam head.
• Before removing the fabric brush, be sure the appliance is unplugged and totally cool.
• Pull the brush out of the steam head to remove it.

Filling the Water Tank

• Ensure that the steamer is unplugged.
• Remove the water tank from the base of the appliance by pulling the handle upwards.
• Unscrew the tank cap and fill the tank.
• The tank holds 2.35 liters (80 ounces).
• The steamer must be used with TAP WATER.
• If the water in your area is hard, Rowenta recommends that you mix half tap water and half distilled water, which reduces the hardness.
• You can also use bottled spring water.
• After closing the cap, turn the tank down and hold it by the handle.
• Check that no water is leaking through the cap.
• Place the water tank on the base.
• If you have any difficulty placing it, check that the water tank is not the wrong way round.

Using the Device

• Only operate the steamer on the floor, clear of any materials that may obstruct the base of the steamer
• Do not obstruct the openings on the lower part of the appliance.
• If necessary, expand the pole to the desired height by unlocking it, pulling it gently, and locking it again.
• Plug in the power cord, and a beep sound is emitted, and the power light on the front of the appliance turns on.
•  Hold down the Set/On-Off button located on the steam head for 2 to 3 seconds to switch on the steamer. The steamer starts on the minimum steam output setting.
• The steam amount can be set to the desired level by successively pressing the Set/On-Off button (5 different settings to perfectly adapt the steam output to all fabric types, from delicate to thick ones).
• The steamer produces steam in 60 seconds when in the max position of variable steam.
• Put the garment directly on the rotating hanger or on another hanger that you can hang up on the hook. To steam pants, we advise you to use the two hangers as described in the picture.
• Grasp the steam head with the steam vents pointing away from you. Start steaming by brushing the material lightly with the grain of the fabric in an up/down vertical motion.
• The fabric brush opens the weave of the fabrics for better steam penetration.
• Start at the top of the garment and gradually move downward. Always steam in a vertical position.
• For more ease, we recommend pulling the garment downward with your free hand while steaming.
• During use, the hose may make a gurgling noise. This is a normal occurrence due to condensation.
• If you hear the gurgling noise, hold the hose up to direct the condensation back into the appliance.

Empty Tank Detector

This appliance is equipped with an empty tank detector. When the water tank is empty, a beep sound is emitted for 1 minute, and the light indicators on the steam head will blink to alert you to fill the water tank.

Turn off the appliance and fill the water tank. The appliance will automatically shut off after 1 minute if the water tank remains empty.

Auto-Off Function

• This garment steamer is equipped with the Auto-Off function to ensure optimum safety.
• Thus, if the steam head stays motionless for 5 minutes, a beep sound will be emitted for 2 minutes before the automatic shut-off.
• The garment steamer automatically turns to « Energy saving » mode before the automatic shut-off.
• During this time, the steam output is significantly reduced in order to limit the energy consumption before the appliance completely shuts off.
• Gently move the steam head to reactivate the appliance.

After Use

• After using the steamer, switch the power off by holding down (3 sec.) the Set/Off button.
• Once the power indicator light turns off, you can unplug the appliance.
• Hang the steam head in an upright position on the hook when not in use.
• Turn the hanger vertically if you want to easily store the appliance away.
• Empty and rinse the water tank each time before storage to flush out any scale particles.
• Wrap the cord around the power cord clips.
• Do not carry the steamer by the water tank handle.
• This appliance includes luggage-style wheels for added convenience when transporting.

Cleaning

1. The appliance must be descaled at least once a year or after 50 hours of use.
2. To carry out a descaling operation, follow the following steps:
3. Ensure that the appliance has cooled down completely.
4. Fill the water tank with fresh water and place it on the main unit, allowing water to fill the boiler.
5. Remove the tank from the main unit and empty the water from the boiler through the same way the water goes inside.
6. Repeat steps 2 and 3 several times until the scale has been removed.

Troubleshooting

Limited Warranty

This product is guaranteed by Rowenta for 1 year against any manufacturing defect in materials or workmanship, starting from the initial date of purchase. The manufacturer’s warranty by Rowenta is an extra benefit which does not affect the consumer’s Statutory Rights.

The Rowenta warranty covers all costs Rowenta IS5100 Garment Steamer related to restoring the proven defective product so that it conforms to its original specifications, through the repair or replacement of any defective part and the necessary labor. At Rowenta’s choice, a replacement product may be provided instead of repairing a defective product.

Conditions & Exclusions

This warranty will not cover any damage Rowenta IS5100 Garment Steamer that could occur as a result of misuse, negligence, failure to follow Rowenta’s instructions, use on current or voltage other than as stamped on the product, or a modification or unauthorized repair of the product. It also does not cover normal wear and tear, maintenance, or replacement of consumable parts, and the following:

• The Rowenta guarantee does not apply in case of non-conformity of the purchased product with the local standards, such as voltage, frequency, power plugs, or other local technical specifications

Consumer Statutory Rights

This warranty gives a consumer specific legal rights, and the consumer may also have other legal rights which vary from State to State or Rowenta IS5100 Garment Steamer Country to Country, or Province to Province. The consumer may assert any such rights at their sole discretion.

Customer Service

• Website: https://www.rowenta.ca/
• Mailing address: 36 Newmill Gate, Unit 2, Toronto, ON, Canada M1V 0E2
• Phone number: 1-800-418-3325
• Hours of service: Monday to Friday, 8:30 to 5 pm EST

FAQs

What type of water should I use in the Rowenta IS5100?

If it’s easy, Rowenta suggests utilising tap water. To avoid mineral accumulation, combine 50% tap water with 50% distilled water if you live in a hard-water location.

Can I use the Rowenta IS5100 on all fabrics?

The majority of textiles, including cotton, silk, wool, linen, and synthetics, are safe to use. Test on a hidden location first for sensitive fabrics. Steer clear of heating suede, leather, or textiles that say “dry-clean only.”

Can I use the IS5100 steamer on upholstery or curtains?

Of course. The IS5100 is great for cleaning bedding, draperies, and upholstery. To prevent too much moisture, always steam vertically and from a close distance. Before you apply steam, make sure the fabric is colourfast.

How long can the Rowenta IS5100 operate on a full tank?

Depending on the steam level setting, a full water tank may produce steam continuously for roughly 60 minutes. To avoid burns, turn the unit off before removing the tank; however, you can refill it whenever you want while it’s operating.

Is the IS5100 safe to leave on between uses?

Always treat the IS5100 as you would any hot appliance, even though it has an automatic shut-off feature in case the water runs out or the machine overheats.

Where can I find the official instruction manual for the Rowenta IS5100?

The Rowenta IS5100 Garment Steamer Instruction Guide is available for direct download from the Rowenta website or the local Rowenta support page. For precise search results, use the product’s model number, which can be located on the base label.

How do I know when the Rowenta IS5100 is ready to use?

Water spitting may result from hitting the steam trigger before the light has stabilised.