Soomfon SF-BT013 Audio Streaming Box Instructions Guide

Soomfon SF-BT013 Audio Streaming Box

Packing Content

Product Overview

1. Power on/off
2. Wireless Pairing/Re-pairing
3. Mode Switch (TX/RX/BYPASS)
4. Search and pair Bluetooth devices (TX mode)
5. MFB ( RX: Pause/ Volume+/-; TX: Up/Down/Confirm )
6. Type-C charging port
7. Output (RX mode)
8. Input (TX mode)

Features

1. 2-in-1 Wireless transmitter and receiver | Make your home entertainment system wireless.
2. Simultaneously stream audio to one or two Bluetooth headphones or speakers without delay.
3. Turn your wired speakers, CD players, or any non-Bluetooth devices into wireless.
4. Compatible with most TVs on the market with Optical and AUX audio jacks.
5. Unique bypass function allows you to enjoy TV via non-Bluetooth headphones and speakers.
6. Adopt advanced Bluetooth technology 5.0, fast pairing,g and auto reconnect.
7. 1.8′ LCD and big rotary knob upgrade operation experience, easy to use, and farewell to blind connection.

Compatibility

This device can be paired with most Bluetooth headphones on the market. Each time can be connected with one/two Bluetooth headphones or speakers.

Precautions

Please read all safety instructions and warnings carefully before using this product. Improper use of this product may result in damage to this or attached products. To ensure the products work well, please DON’T:

• Get the Adaptor wet
• Drop the Adaptor as this will invalidate your warranty
• Open up the Adaptor. There are no user-serviceable parts inside
• Expose the Adaptor to extreme temperatures or rapid changes of hot to cold or vice versa. Please DO:
• Clean the Adaptor with a soft dry cloth and no detergents

Operating Instructions

Power on Wireless Audio Adaptor SF-BT013

Connect the wireless audio adapter with a Type-C cable included. Press and hold “①” for 3 seconds to power on the Bluetooth transceiver.

Preparation before setup

1. If you use it as a wireless receiver (to provide wireless audio transmission function for your speakers or sound system), please refer to the usage environment 11.
2. If your TV is connected to your sound system (e.g., Sound Bar, AV receiver, external speaker) already, please use the “bypass” feature and refer to context of use 2.
3. If you’re only using it with your TV, please refer to context of use 3.

Context of Use 1: Using as a Wireless Receiver (RX mode)

Switch the Wireless Audio Adaptor SF-BT013 to RX mode, “RX” will be shown on the screen.

1. Connect with speaker/ Soundbar-
2. With 3.5mm Audio Cable
3. With a 3.5mm to RCA Audio Cable
4. With Optical Audio Cable
5. Once connected, the name of the mobile phone or Bluetooth device will be shown on the screen.
6. Turn on the Bluetooth on your phone or other device and search for “SOOMFON SF-BT013”- tap to connect.
7. Press the MFB ⑤ to pause the music or clockwise/anti-clockwise rotate to increase/decrease the volume.

Please note

• SF-BT013 can connect two mobile phones/devices at the same time.
• The transceiver will automatically reconnect to the most recently connected two devices once the Bluetooth of that device has been switched ON.
• Press the “ ” button to disconnect current paired devices.

TV (BYPASS mode)

Context of Use 2:Connect the SF-BT013 to your TV (BYPASS mode). “Bypass mode” allows you to use the Wireless Audio Adaptor SF-BT013 and the Sound bar/Sound System at the same time.

1. Press “③” to switch the SF-BT013 to bypass mode; “BYPASS MODE” will appear on the screen.
2. Connect the TV and sound system, as referred tin.
3. Please make sure that you use the same type of input/output, e.g, SF-BT013 defaults to optical input when powered on.

Context

Context of Use 3:Connect SF-BT013 to your TV/audio source and Bluetooth headphones/speakers (TX mode)

1. Press “③” to switch SF-BT013 to TX mode; “TX” will appear on the LCD screen.
2. Power on the Bluetooth headphone/ speaker and set it in pairing mode.
3. Keep them close to each other and wait.
4. The name of the searched Bluetooth headphone/speaker will appear on the screen.
5. Press the MFB to confirm, and a voice prompt will let you know the connection is successful.

How to connect the second headphone/speaker

1. Enter the second headphone into pairing mode.
2. Press the “ ” button”②” to search devices.
3. Press the MFB to confirm
4. Press the “ ” button”②” to disconnect the current two paired devices.
5. The transceiver will automatically enter searching mode, and all searched device names will appear on the screen. (One page only can show four device names)
6. Press ④ to disconnect the current two paired devices and automatically enter the searching and connecting mode. Once connected, the two devices’ names will appear on the screen.

Please note

1. The transceiver will automatically reconnect to the recently connected two headphones/ speakers once they are in pairing mode.
   

Choose the correct interface before connecting

Specification

• Wireless version: Actions V5.0
• Wireless frequency: 2402-2480MHz
• Wireless connection name: SOOMFON SF-BT013
• Wireless TX distance: ＞14M （no obstacle）
• Wireless RX distance: ＞20-30M（no obstacle）
• Wireless audio technology: SBC
• Dual stream: yes, can contact two devices at once
• TX/RX mode interface: Aux/OPT
• Bypass model interface: Aux/OPT
• Display size: 29*46*1.7MM
• Microphone: No
• Battery: No
• Charging interface: Type-C 5V
• Product size: 112.5*84*32.7mm

Customer Service

• Website: www.soomfon.com
• Ph: +86-755-2357 1211