Tribit BTS52 STORMBOX BLAST Wireless Party Speaker User Guide

Tribit BTS52 STORMBOX BLAST Wireless Party Speaker

Packing List

Overview

How to Charge

1. How to charge the speaker: Connect the speaker with one end of the provided power cord, and plug the other end into a power outlet.
2. How to charge other devices through the speaker: Connect the speaker and other devices with the USB-C charging cable.

Button Control

Power ON/OFF

When the StormBox Blast cannot work normally due to unknown reasons, long-press the power button for 8 seconds to achieve a forced shutdown and then restart the StormBox Blast.

Bluetooth Connection

Short Press Enter Bluetooth

• Pairing mode Bluetooth indicator light flashes quickly

StormBox Blast

• Automatically connects back to 1 paired device.
• Connects 2 devices at the same time;
• Memorises 8 Bluetooth devices;
• When two devices are simultaneously connected to the StormBox Blast, device A needs to pause the playback, and then device B can play.

Multifunctional Button (MFB

Volume Adjustment

Lighting Atmosphere Effect

Short

Press Switch/turn off the lighting effect mode. Lighting effect indicator: white light is always on/. off

XBass Function Stereo Mode

1. Please make sure that the two speakers are turned on
2. Long-press the Bluetooth button of the speaker A for 5s to enter  the Stereo Mode pairing ( Note: this speaker will be regarded as the main speaker );P Press the Bluetooth button of the speaker B to enter the  pairing mode ( Note: If this speaker is already in pairing mode, there is no need to perform this operation );
3. When you hear the prompt sound “stereo mode”, the pairing is successful, and speakers A & speaker B enter the Stereo Mode. At this time, the main speaker will broadcast “left channel” and the secondary speaker will broadcast “right channel”.

Reset

• If the speaker has abnormal conditions, you can try to reset the Blast ( Note: long-press the ”volume and ”volume -” buttons at the same time for 5 seconds ). After resetting, the historical pairing information will be cleared, and you need to re-pair the Blast with the device before use.

Specifications

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC Caution

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

• Website: https://tribit.com/
• Ph: +91 9810348155