Vevor AD110003 Pivoting Utility Fan Air Dryer Instructions

Vevor AD110003 Pivoting Utility Fan Air Dryer

Safety Instructions

This is the warning / caution-safety symbol, regarding safety, warning of potential risks to users and others. All messages relevant to safety specify the potential risk to which they refer and indicate how to reduce the risk of injury, damage, and electric shock due to incorrect use of the appliance. Make sure to comply with the following:

• Do not repair the appliance unless specifically stated in the user manual.
• The power cable must be long enough to connect the appliance, fitted in the cabinet, to the power supply.
• For installation to comply with the current safety regulations, an omnidirectional switch with a minimum contact gap of 3mmisrequired.
• Do not use multi-sockets or extension cords.
• Do not pull the appliance’s power cable.
• The electrical parts must not be accessible to the user after installation.
• The Manufacturer declines any liability for inappropriate use or incorrect setting of the controls.
• The accessible parts can become very hot during use.

Operation

• Before operating the blower fan, be sure there are no unsecured materials that can be blown about in the stream of air.
• Plug the blower fan into a properly grounded three-pronged 120V AC receptacle. Using the knob on the side of the blower fan, select the desired operating speed.
• You can adjust the blower fan’s vertical angle. Do this by moving the blower fan body forward or backward until the desired setting is met. A clicking sound emitted from the fan while adjusting the angle is normal.

Breaker Reset

• A 10-amp breaker is provided as Vevor AD110003 Pivoting Utility Fan Air Dryer a safety feature of your blower fan.
• You can reset by unplugging the appliance or accessory causing the breaker to trip and pushing the reset button on the blower fan. This button is adjacent to the fan’s outlets.

Maintainance & Care

• Before you clean or service your blower fan, be sure to unplug it.
• Clean your blower fan using a soft, moistened cloth with a mild soap solution.
• Never immerse any electrical parts partially or fully in water.
• Do not use gasoline, benzene, thinner, harsh cleaners, etc, as cleaning agents.
• When not in use, store the blower fan in a clean, dry area.
• The motor is permanently lubricated.

Technical Parameters

Warranty

Warranty covers the unit from defects in materials and craftsmanship.The Warranty covers normal use for a term of one year fromtheoriginal dateof purchase. It does not cover signs of misuse including, but not limitedto,aunit that has been dropped, subjected to water damage, tamperedwith,improper voltage use and unauthorized maintenance andrepairs. ThePOWER CORD are not covered by the warranty.

Customer Service

• Email: @vevor.com
• Website: https://www.vevor.com/
• Manufacturer: Cixi Jirui Electric Appliance Co., Ltd
• Add: 118# Nanxin Road, Zonghan Street, Cixi City, Zhejiang Province
• E-mail: CustomerService@vevor.com

FAQs

Q: What is the Vevor AD110003 Utility Fan used for?

For drying floors, carpets, paint, walls, and ventilation areas, the Vevor AD110003 Pivoting Utility Fan Air Dryer is a high-velocity air mover. It is perfect for use in garages, workshops, basements, job sites, and homes following construction or cleaning.

Q: How powerful is this fan?

The airflow from this model can range from 550 CFM to 1000+ CFM (cubic feet per minute), depending of the speed setting.

Q: What are the available speed settings?

With the AD110003’s three programmable speeds (Low, Medium, and High), you may regulate the airflow intensity to suit your ventilation or drying requirements.

Q: What is meant by “pivoting” in the product name?

To increase air circulation or speed up drying, the fan’s pivoting head can tilt up or down from 0° to 120°, directing airflow just where you need it: across the floor, up walls, or towards ceilings.

Q: Can this fan be used as a carpet or floor dryer?

Indeed. It is appropriate for rapid moisture removal due to its strong, concentrated airflow and pivoting construction.

Q: Can it be used for ventilation or cooling?

Indeed. It is appropriate for rapid moisture removal due to its strong, concentrated airflow and pivoting construction.

Q: What is the voltage and power requirement?

Depending on speed, the fan usually draws between 120 and 150 watts of power while operating at 110 to 120V AC, 60Hz. Before using your model, always make sure to check the label for precise requirements.