Shark IZ1441H PowerFins Cordless Vacuum
Reach Anywhere
Press the MultiFLEX® Lock Release button to lower the angle of the wand to increase your reach.
Store Anywhere
Press the MultiFLEX Lock Release button and fold the handheld vacuum forward. To vacuum, lift the handheld vacuum until the wand locks in place.
Emptying the Dust Cup
- To empty the dust cup, first disconnect the handheld vacuum from the wand by pressing the Wand Release button and pulling up on the handheld vacuum.
- Position the dust cup over a trash bin and slide the lid release button forward.
What’s Inside
- A Handheld Vacuum
- B DuoClean PowerFins Floor Nozzle
- C MultiFLEX Wand
- D Crevice Tool
- E Dusting Brush
- F Anti-Allergen Brush
- G Charger
- H HEPA Post-Motor Filter (Pre-Installed)
Power Settings
OFF
Slide the switch to the top to turn off the power. To begin vacuuming in Standard Mode, slide the switch to the appropriate setting.
Bare Floor Setting
Bare Floor/Area Rugs: Slide the switch to the middle. The brushroll spins slowly to clean bare floors and small area rugs.
Carpet Slide switch to the bottom. The brushroll spins faster to pick up debris below the surface of your carpets.
Boost Mode
For an added boost in power, pull the Trigger on the handheld vacuum. Release it to return to standard power.
For deep cleaning per ASTM F 608 (embedded Shark IZ1441H PowerFins Cordless Vacuum dirt in carpets), please select the Carpet setting and pull the trigger to go into Boost mode.
LI-Ion Battery
In Use
Full charge takes approximately 3 hours.
Battery Indicator Lights
The battery comes partially charged. Charge fully before first use.
Charging
- To charge, remove the handheld vacuum from the wand by pressing the Wand Release button and pulling up. Plug the charger into the charging port.
- To put the vacuum in storage mode, press the MultiFLEX Lock Release button while folding the handheld vacuum forward until the wand clicks and locks. Plug the charger into the charging port on the battery.
Battery Runtime
Customer Support
- Website: sharkclean.com
- Ph: 0800 368 7155
FAQs
Q: What are the Shark IZ1441H PowerFins?
With PowerFins brush roll technology, a self-cleaning brush and PowerFins motorised plates for thorough carpet and hard floor cleaning, the Shark IZ1441H is a cordless stick vacuum. It is lightweight, multipurpose, and perfect for cordless household cleaning.
Q: What is PowerFins technology?
PowerFins are motorised, soft fins on the brush roll that effortlessly glide across hard floors and remove dirt and debris from carpets. They are made to reduce hair knots and increase pickup effectiveness.
Q: Can I use it on both carpets and hard floors?
Indeed. The PowerFins brush manages both without altering settings, and the Shark IZ1441H automatically adapts to various floor kinds.
Q: What is Max Mode, and when should I use it?
In order to thoroughly clean carpets or extremely dirty areas, Max Mode boosts suction power. Because the duration will be shortened, use it cautiously to protect battery life.
Q: Is the Shark IZ1441H safe for pets and children?
Yes, it is made to be safe and lightweight, but keep an eye on kids or dogs while it’s in use. Keep wires and parts out of your pets’ mouths.
Q: Can I vacuum wet spills?
No. This hoover is solely meant for dry debris. Steer clear of liquids to avoid harm.
Q: What is the warranty period?
A two-year limited warranty covering manufacturing faults is included with the Shark IZ1441H. Go to Shark Official Support for assistance.
Q: Can I replace the battery?
The battery is detachable, yes. For a replacement battery, get in touch with Shark support or an authorised dealer if the runtime drastically drops. To ensure performance and safety, only use authentic Shark batteries.