Shark IZ462H Self Cleaning Cordless Vacuum User Manual

Shark IZ462H Self-Cleaning Cordless Vacuum

Description

• A Handheld Vacuum
• B DuoClean® PowerFins Floor Nozzle
• C MultiFLEX® Wand
• D Crevice Tool
• E Dusting Brush
• F Anti-Allergen Brush
• G Charger
• H HEPA Post-Motor Filter (Pre-Installed)

Reach Anywhere

Press the MultiFLEX® Lock Release button to lower the angle of the wand to increase your reach.

Store Anywhere

Press the MultiFLEX Lock Release button and fold the handheld vacuum forward. To vacuum, lift up the handheld vacuum, until the wand locks in place.

Emptying the Dust Cup

1. To empty dust cup, first disconnect the handheld vacuum from the wand by pressing the Wand Release button and pulling up on the handheld vacuum.
2. Position dust cup over a trash bin and slide the lid release button forward.

Power Setting

Off

Slide switch to the top to turn off power. To begin vacuuming in Standard Mode, slide switch to the appropriate setting.

Bare Floor Setting

Carpet Slide switch to the bottom. The brushroll spins faster to pick up debris below the surface of your carpets.

Carpet Setting

Carpet Slide switch to the bottom. The brushroll spins faster to pick up debris below the surface of your carpets.

Boost Mode

For an added boost in power, pull the Trigger on the handheld vacuum. Release it to return to standard power.

LI-Ion Battery

In Use

• Full Charge
• Mid Charge
• Low Charge
• Nearly Empty
• No Charge
• Low Charge
• Mid Charge
• Nearly Full
• Full Charge

Battery Indicator Lights

Charging

To charge, remove the handheld vacuum from the wand by pressing the Wand Release button and pulling up. Plug the charger into the charging port.

To put the vacuum in storage mode, press the MultiFLEX Lock Release button while folding the handheld vacuum forward until the wand clicks and locks. Plug the charger into the charging port on the battery.

Battery Runtime

Customer Support

• Website: sharkclean.com
• Ph: 0800 368 715