Orbegozo CTP 1830 Rechargeable Electric Hair Clipper.
Safety Instructions
- Children must never carry out cleaning and user maintenance without supervision.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the appliance and the cable cord out of the reach of children less than 8 years old.
- If the supply cord is damaged, it must be repaired by an authorised service agent.
- Do not use the unit with a damaged cord or plug, or if it is not working properly.
- Never immerse the appliance in water or any other liquid.
- Make sure the appliance has been unplugged before cleaning.
- This appliance must be installed following the national regulations for electrical installations.
- Do not place or store this appliance where it can fall or be pulled into a tub or sink.
- Except when charging, always unplug this appliance from the electrical outlet immediately after use.
- Never drop or insert any object into any of the appliance’s openings.
- Always store this appliance and cord in a moisture-free area.
- Make sure the cord is disconnected from the groomer stand when storing.
- Do not use this appliance with a damaged or broken cutter unit, as injury may occur.
- Always make sure the blades are aligned properly.
- Do not use an extension cord or a voltage converter with this appliance.
- Do not wrap the cord around the appliance.
- The power unit is intended to be correctly oriented in a vertical or floor-mount position.
- Do not pull on the connection cord, but rather on the plug, to separate the appliance from the mains.
- Do not leave the appliance unattended when it is switched on, as this may be a source of danger.
Description
- Neckline & sideburn trimmer attachment
- Full-width trimmer attachment
- Lifetime self-sharpening 3-Dimensional, Rounded stainless steel cutter blades
- Hair clipping comb
- Hair clipping comb
- 9-position hair length selector
- Release button
- ON/OFF slide switch
- Socket for appliance plug
- Cleaning brush
- Styling comb
- The LED charging indicator light on the adaptor
- Appliance plug
- Charging plug
- Nose. ear, eyebrow trimmer attachment
- Micro shaver
- Store& charge stand
Technical Specification
- Rated Voltage: 220-240V~ 50Hz
- Rated Power: 3W
- Charging Time: 8 hours
- Battery Capacity: 600 mAh ×2 (included)
How to Use
- Select the attachment that best fits your personal grooming needs.
- Place attachment atop Groomer Body.
- Secure by carefully inserting and turning the attachment in a clockwise direction.
- To remove attachment, follow Step 2 in reverse order.
- Slide ON/Off Switch upward to power the Personal Groomer.
- To add, align the Comb side rails with the slots of the trimmer head.
- Secure the Comb by sliding downward, away from the blade head.
Beard/Moustache
- Use a mall comb (D)(6mm) to straighten hairs for trimming.
- When trimming, first select the Precision Trimmer Attachment. Starting under the chin, follow the jaw line back toward the ear. Trim in multiple directions to capture all stray hairs.
- When thinning or tapering, use a small comb to hold the beard in place. On the opposite hand, hold the Groomer with the cutting system facing outward while slowly moving the Trimmer along the length of the comb. The Adjustable Comb Attachment can also be used to achieve the desired look.
Micro Shaver
- Use the Micro Shaver attachment to clean up detailed areas.
- For best results, avoid holding at an angle.
Ears
- When trimming the inner ears, avoid inserting the Grooming System (O) more than 1/4” into the ear canal. Rotate the Grooming System in a circular motion while gently moving in and out of the ear canal.
Eyebrows
- Guide the cutting edges to stray hairs along the eyebrows.
- For best results, do not use the grooming system to define the entire eyebrow.
Nape of Neck
- Using a hand-held mirror is necessary for self-trimming.
- Lift hair off neck, using index finger to cover & protect hairs NOT needing trimming.
- Carefully touch the cutting blade to the neck, slowly moving the groomer in an upward direction until
stopped by the index finger.
Cleaning, Care & Maintenance
- Remove attachment.
- Rinse ONLY the attachment under warm running water.
- DO NOT use hot water as this might cause damage.
- After first removing the attachment, thoroughly brush and blow out hair clippings from the cutting
system, attachment, and the top of the power handle. - Remove the attachment by pressing the security latches on the front of the micro shaver.
- Remove the head, and shake to remove excess clippings.
- Replace the attachment by gently snapping it into place.
- Rinsing attachments under water (above) requires lubricating the cutting blades 1× monthly.
- Use only light-grade oils, as these will not evaporate or slow down the speed of cutting blades.
- Do not use hair oil, grease, or any oil mixed with either kerosene or solvent, as these too will evaporate.
Disposal
- The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEE) requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream.
- Old appliances must be collected separately to optimise the recovery and recycling of the materials.
They contain and reduce the impact on human health and the environment.
Declaration of Conformity
- This device complies with Orbegozo Electric Grill the requirements of the Low Voltage Directive 2014/35/EU and the requirements of the EMDirective 2014/30/EU.
Guarantee
Orbegozo is not responsible for components and accessories that are subject to wear and tear due to use, as well as perishable compounds or those that have deteriorated due to improper use. Check the legal conditions on our website.
Customer Service
- Website: https://orbegozo.com/
- Visit: https://orbegozo.com/contacto/.
- Ph: 965072847
FAQs
Q: How long does a full charge last?
Depending on the cutting speed and intensity of use, a full charge usually lasts 40–60 minutes. For reliable functioning, always recharge when the power starts to decline.
Q: Can I use the clipper while it’s charging?
This implies that simply connecting it to the power source, you can keep trimming even if the battery gets low.
Q: How do I turn the clipper on and off?
To turn on or off, just move the power switch, which is often on the handle, upward and downward. Always turn off the device before cleaning or replacing any accessories.
Q: Can I use the hair clipper on wet hair?
The main purpose of the CTP 1830 is dry cutting. Although you can trim somewhat damp hair, unless the handbook specifically says it is waterproof, do not use it on entirely wet hair or under running water.
Q: How often should I oil the blades?
Before or after each two to three uses, dab the blades with a few drops of oil. This guarantees steady cutting performance, lowers friction, and stops corrosion.
Q: Can I use the Orbegozo CTP 1830 for beard trimming?
Indeed! For delicate edging and details, use smaller combs.