Swellpro GC3-S Waterproof 4K 3 Axis Gimbal Camera User Guide

Swellpro GC3-S Waterproof 4K 3 Axis Gimbal Camera

Safety Instructions

• The GC3-S is a piece of precision electronics with corrosion-resistant materials that allow for use in
  harsh marine environments.
• As with any marine equipment, trouble-free and lasting operations depend on proper attention and maintenance of the equipment.
• When taking off or landing, slowly proceed to avoid damage to the gimbal camera, which can be caused by the huge impact when contacting the surface at high speeds.
• Dropping or crashing directly into the water from above will result in significant damage to the drone and the gimbal camera.
• After using in seawater, soak and rinse thoroughly with clean fresh water before the seawater dries out. If seawater or other sediments form on the gimbal camera, soak thoroughly with fresh water and clean all sediments on the camera and motor before use.

Installation

• The GC1-S supports Micro SD cards with a maximum capacity of 128GB. Since the camera requires fast reading and writing of high-stream video data, please use Micro SD cards with Class 10 or UHS-1 or above to ensure proper functioning.
• Do not insert or unplug the Micro SD card during aircraft shooting, as data files may be damaged or lost.
• Once you are done recording, stop recording and save the file. If you turn off the power directly before saving the files, the recording file will be lost.

After Use Casing

After using the gimbal camera, you can choose not to take off the gimbal camera and put it directly into the case with the drone. Follow the following steps to make sure the gimbal camera is properly secured after casing.

Control

Gimbal Contro

APP Interface

To get into the APP’s camera interface: Power on the remote controller, then the aircraft. Connect the phone to the remote controller’s Wi-Fi hotspot. Then click “Login device”.

Photo Setting Interface

Video Setting Interface

Camera Setting Interface

Specification

Gimbal

Customer Service

• Website: www.swellpro.com
• Phone: ＋1866-534-5788
• Office hours: 9 00 – 17:00 (EST, UTC-5), Monday to Friday
• Address: R413, Block 10A, Science and Technology Ecological Park, ShenZhen, 518063 Guangdong, China