Cosori CS108-NK Gooseneck Kettle Instructions Guide

Cosori CS108-NK Gooseneck Kettle

Safety Instructions

1. Do not fill the kettle above the “MAX” line. This may cause water to boil over and may cause scalding.
2. Closely supervise children near the kettle. Do not allow children to use or play with this kettle.
3. Do not immerse the kettle, base, cord, or plug in water or other liquids.
4. Using accessory attachments not recommended by the manufacturer may result in fire, electric shock, or injury.
5. Do not use outdoors.
6. Place the kettle on a dry, flat surface. Do not place the kettle on or near heat sources such as stovetops, ovens, radiators, etc.
7. Do not turn on the kettle while the lid is open.n
8. Always make sure the lid is closed while the kettle is operating. Do not cover the spout opening while the kettle is operating. Do not cover the slits near the On/Off Switch.
9. To disconnect, use the On/Off Switch to turn the kettle off, then remove the plug from the outlet.
10. Only use the kettle as directed in this manual.
11. Household use only.
12. Do not let the cord (or any extension cord) hang over the edge of a table or counter. Do not allow the cord to touch hot surfaces.
13. If the plug does not fit, reverse the plug. If it still does not fit, do not use the plug in that outlet. Do not bypass this safety feature.
14. This kettle uses a short power-supply cord to reduce the risk of entangling or tripping. Use extension cords with care.
15. The marked electrical rating of an extension cord should be at least as high as the rating of the kettle.

Getting Started

• Lid
• Steam Vents
• Kettle
• Spout
• Handle
• Power Base
• Heating Plate
• Control Panel
• Cord

Controls

180°F Green

• Set the kettle to 180°F / 82°C, the ideal temperature for green tea.

195°F Oolong

• Set the kettle to 195°F / 91°C, the ideal temperature for oolong tea.

205°F Coffee

• Set the kettle to 205°F / 96°C, the ideal temperature for coffee.

212°F Boil Black

• Set the kettle to 212°F / 100°C, the ideal temperature for black tea. MyBrew
• MyBrew’s default temperature is 140°F.
• Use the VeSync app to change MyBrew’s default temperature.

Hold Temp

• Starts or cancels Hold Temperature Mode to maintain the desired temperature

Cancel

• Press to turn the kettle off.
• Press and hold for 15 seconds to restore the factory settings.

Use

Water Test

1. Remove all packaging from your kettle and its accessories.
2. Completely unravel the power cable and place the power base on a flat, level, stable surface.
3. Press firmly to make sure the lid fits securely. Press 212°F (“BOIL BLACK”).
4. The kettle will automatically turn off once it has finished boiling the water.
5. Do not fill above the “MAX” line.
6. Wipe any water from the outside of the kettle and the base.
7. Put the lid on the kettle and make sure it fits securely. Place the kettle on the power base.
8. Plug in the cord. The button lights will blink, and the base will beep once.
9. Press a preset temperature button. The button will light up, and the kettle will start heating the water.
10. When the water reaches the selected temperature, the kettle will beep 3 times and stop heating.

Making Pour-Over Coffee

1. Place the coffee maker filter into the decanter.
2. Add ground coffee to the filter according to your preference.
3. Heat water using the smart kettle.
4. Use the kettle to gently pour water over the coffee grounds using a slow spiral motion. Pour just enough water to saturate the grounds.
5. Wait 30–45 seconds. Use the kettle to pour water over the coffee grounds again, using a slow spiral motion.
6. If water reaches the top of the filter, stop and let it settle to the halfway point, then begin pouring again until you have the desired amount of coffee.
7. When finished, remove the filter and enjoy

High Altitude Users

• At higher elevations, water boils at a lower temperature. You may need to use a different preset.

Altitude Preset for Boiling Water

• 3,881–9,255 ft / 1,183–2,820 m 205°F COFFEE
• 9,256 ft / 2,821 m and above 195°F OOLONG

Smart Kettle Sounds

• The kettle will alert you by beeping 3 times when the water reaches the preset temperature.
• The alerts can be turned off in the product settings on the VeSync app.
• The kettle will also beep once when plugged in or when boil-dry protection is activated.

Boil-Dry Protection

• Your kettle is equipped with boil-dry protection. If there is less than ½ US cup / 118 mL of water in the kettle, the heat will automatically shut off.
• Allow the kettle to cool, then add more water before using it again. If all buttons blink and the kettle beeps, remove the kettle from the base and let it cool.

Adjusting Lid Tightness

1. Take off the lid.
2. Use a tool to adjust the 3 tabs on the kettle lid.
3. If you push the tabs in, the lid will fit more loosely and will be easier to put on and take off.
4. If you pull the tabs out, the lid will fit more tightly and will not come off as easily.
5. After adjusting the tabs, put the lid back on and take it off again to see if the fit is correct. If not, adjust the tabs again until the lid fits the way you prefer.

VeSync App Functions

• The VeSync app allows you to access additional smart kettle functions, including those listed below.

Remote Control

• All smart kettle functions can be controlled remotely.
• Boiling progress can be monitored from a distance.

MyBrew Customization

• Customize the MyBrew preset by choosing your temperature.
• Baby Formula Mode allows your water to cool to an ideal formula temperature after boiling.

Hold Temp Customization

• Customize the Hold Temperature Mode’s duration.
• Activate Maintain Hold Temp to resume Hold Temperature Mode when the smart kettle is returned to the base.

Delay Start

• Schedule when you want your water to boil.

Care & Maintainance

Cleaning

1. Unplug the kettle and allow it to cool before cleaning.
2. Wipe the kettle and base Cosori CS108-NK Gooseneck Kettle with a soft, damp cloth.
3. Make sure that the electric socket on the underside of the kettle is kept dry.
4. Dry all parts after every use.

Descaling the Smart Kettle

1. Unplug the kettle and pour out all the water. Make sure the kettle is cool.
2. Squeeze half a lemon into the kettle, or add ½ US cup / 118 mL of distilled vinegar into the kettle.
3. If the kettle has thick scale buildup, scrub the kettle’s inner walls with a nonscratch scrub sponge.
4. Add 2 US cups / 473 mL of water. Boil the mixture.
5. Pour out the mixture, then wipe off any remaining scale with a non-abrasive cloth, sponge, or cleaning brush.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
Interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

Arovast Corporation (“Arovast”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for 1 year from the date of original purchase. Arovast agrees, at our option, Cosori CO294-CW Coffee Warmer Instructions during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase.

• To damages or defects caused by accident, abuse, misuse, or improper or inadequate maintenance.
• To damages or defects caused by the service or repair of the product performed by an unauthorized service provider or by anyone other than Arovast.
• To damages or defects exceeding the cost of the product.

CUSTOMER SUPPORT

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.

• Arovast Corporation 1202 N. Miller St. Suite A Anaheim, CA 92806
• Website: www.cosori.com
• Email: support@cosori.com
• Toll-Free: (888) 402-1684

Support Hours

• Monday–Friday 9:00 am–5:00 pm PST/PDT.. Please have your invoice and order ID ready before contacting Customer Support.

VeSync App Setup

• To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store.
• Open the VeSync app. If you already have an account, tap Log In. To create a new account, tap Sign Up.
• Follow the in-app instructions to finish setting up your smart kettle.